minitower_oled kit

The files here are an update for the absminitowerkit sysinfo.py script.

File locations

all the .py files should be located here;

/usr/local/luma.examples/examples/

the other files should be placed here (these files will require execute permission);

/usr/local/bin/

Info Displayed

The updated sysinfo.py script, as currently configured, will displayed the following information on the OLED display;

   IP: <Pi IP address>
  CPU: 43.8°C
   SD: <used space on M.2>
etho0: <Tx and Rx data>
Up: <system up time>

The colour of the LEDs within the case will change based on the temperature of the CPU.

CPU temp:

             < 45.0: LEDs are Blue
 >= 45.0 and < 49.9: LEDs are Green
 >= 50.0 and < 59.9: LEDs are Orange
            >= 60.0: LEDs are Red

Setting up a Service

Information on how to setup a service, to update the information displayed on the OLED periodically, see this section of the Wiki.

Notes

1. You'll need to alter line 122, in sysinfo.py, and use the mount point you created for your M.2 SSD.

2. The script, sysinfo.py, is setup to report the IP address of the eth0 LAN port if you wish to use the Wireless interface then change line 126.

3. You'll also need to set the required file permissions so the files you place in /usr/local/bin can be executed.