Skip to content

Enable initial support for completions #481

Enable initial support for completions

Enable initial support for completions #481

Triggered via pull request September 9, 2023 11:36
Status Failure
Total duration 2m 48s
Artifacts

build-test-all.yml

on: pull_request
Matrix: build
This is a release build
0s
This is a release build
Release
0s
Release
Fit to window
Zoom out
Zoom in

Annotations

11 errors and 44 warnings
build (vhdl_ls, x86_64-unknown-linux-musl, stable): vhdl_lang/src/analysis/completion.rs#L279
this match could be replaced by its scrutinee and body
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
could not compile `vhdl_lang` (lib) due to previous error
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
The process '/home/runner/.cargo/bin/cargo' failed with exit code 101
build (vhdl_lang, x86_64-unknown-linux-musl, stable): vhdl_lang/src/analysis/completion.rs#L279
this match could be replaced by its scrutinee and body
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
The operation was canceled.
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
The operation was canceled.
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
The operation was canceled.
build (vhdl_ls, x86_64-unknown-linux-gnu, stable): vhdl_lang/src/analysis/completion.rs#L279
this match could be replaced by its scrutinee and body
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
The operation was canceled.
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
could not compile `vhdl_lang` (lib) due to previous error
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
The operation was canceled.
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_ls, x86_64-unknown-linux-musl, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-musl, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-pc-windows-msvc, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_lang, x86_64-unknown-linux-gnu, stable)
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
build (vhdl_ls, x86_64-unknown-linux-gnu, stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/