Google Cloud Pub/Sub Group Kafka Connector

The Google Cloud Pub/Sub Group Kafka Connector library provides Google Cloud Platform (GCP) first-party connectors for Pub/Sub products with Kafka Connect. You can use the library to transmit data from Apache Kafka to Cloud Pub/Sub or Pub/Sub Lite and vice versa.

CloudPubSubSinkConnector is a sink connector that reads records from Kafka and publishes them to Cloud Pub/Sub.
CloudPubSubSourceConnector is a source connector that reads messages from Cloud Pub/Sub and writes them to Kafka.
PubSubLiteSinkConnector is a sink connector that reads records from Kafka and publishes them to Pub/Sub Lite.
PubSubLiteSourceConnector is a source connector that reads messages from Pub/Sub Lite and writes them to Kafka.

Prerequisites

You must have a GCP project in order to use Cloud Pub/Sub or Pub/Sub Lite.

Follow these setup steps for Pub/Sub before doing the quickstart.

Follow these setup steps for Pub/Sub Lite before doing the quickstart.

For general information on how to authenticate with GCP when using the Google Cloud Pub/Sub Group Kafka Connector library, please visit Provide credentials for Application Default Credentials.

Quickstart

In this quickstart, you will learn how to send data from a Kafka topic to a Pub/Sub or Pub/Sub Lite topic and vice versa, using Kafka Connect running locally in standalone mode (single process).

Follow the Kafka quickstart to download Kafka, start the Kafka environment, and create a Kafka topic.

Note: Please use the same Kafka API major version as that used by the connector. Otherwise, the connector may not work properly. Check the Kafka version used by the connector in pom.xml.
Acquire the connector jar.
Update your Kafka Connect configurations.

Open /config/connect-standalone.properties in the Kafka download folder. Add the filepath of the downloaded connector jar to plugin.path and uncomment the line if needed. In addition, because the connector is using Kafka Connect in standalone mode, include offset.storage.file.filename with a valid filename to store offset data in.
Create a pair of Pub/Sub or Pub/Sub Lite topic and subscription.
- CloudPubSubSinkConnector and CloudPubSubSourceConnector
  - Create a pair of Pub/Sub topic and subscription
- PubSubLiteSinkConnector and PubSubLiteSourceConnector
  - Create a pair of Pub/Sub Lite topic and subscription.
Update the connector configurations.

Open the connector configuration files at /config. Update variables labeled TODO (developer) with appropriate input.
- CloudPubSubSinkConnector
  1. Open cps-sink-connector.properties.
  2. Update topics, cps.project, and cps.topic.
- CloudPubSubSourceConnector
  1. Open cps-source-connector.properties.
  2. Update kafka.topic, cps.project, and cps.subscription.
- PubSubLiteSinkConnector
  1. Open pubsub-lite-sink-connector.properties.
  2. Update topics, pubsublite.project, pubsublite.location and pubsublite.topic.
- PubSubLiteSourceConnector
  1. Open pubsub-lite-source-connector.properties.
  2. Update kafka.topic, pubsublite.project, pubsublite.location and pubsublite.subscription.

Run the following command to start the appropriate sink or source connector. You can run multiple connector tasks at the same time.

> bin/connect-standalone.sh \
  config/connect-standalone.properties \
  path/to/pubsub/sink/connector.properties [source.connector.properties ...]

Test the connector.
- CloudPubSubSinkConnector
  1. Follow the instructions in the Kafka quickstart to publish a message to the Kafka topic.
  2. Pull the message from your Pub/Sub subscription.
- CloudPubSubSourceConnector
  1. Publish a message to your Pub/Sub topic.
  2. Follow the instructions in the Kafka quickstart to read the message from your Kafka topic.
- PubSubLiteSinkConnector
  1. Publish a message to your Pub/Sub Lite topic.
  2. Follow the instructions in the Kafka quickstart to read the message from your Kafka topic.
- PubSubLiteSourceConnector
  1. Follow the instructions in the Kafka quickstart to publish a message to the Kafka topic.
  2. Pull the message from your Pub/Sub Lite subscription.

Acquire the connector

The connector is available from Maven Central repository. Select the latest version of the connector, then download "jar" from the Downloads dropdown menu.

You can also build the connector from head.

Run the connector

Please refer to Kafka User Guide for general information on running connectors using Kafka Connect.

To run this connector using Kafka Connect in standalone mode, follow these steps:

Copy the connector jar where you will run Kafka Connect.
Create a configuration file for your Kafka Connect instance. Make sure to include the filepath to the connector jar in plugin.path.
Make a copy of the connector configuration files at /config and update the configuration options accordingly.

Start Kafka Connect with your connector with the following command:

> bin/connect-standalone.sh config/connect-standalone.properties connector1.properties [connector2.properties ...]

If running the Kafka Connect behind a proxy, export the KAFKA_OPTS variable with options for connecting around the proxy.

> export KAFKA_OPTS="-Dhttp.proxyHost=<host> -Dhttp.proxyPort=<port> -Dhttps.proxyHost=<host> -Dhttps.proxyPort=<port>"

When running the connector on a Kafka cluster in distributed mode, "the connector configurations are not passed on the command line. Instead, use the REST API described below to create, modify, and destroy connectors" (Kafka User Guide).

Pub/Sub connector configs

In addition to the Kafka Connect configurations supplied by the Kafka Connect API, the Pub/Sub connector supports the following configurations:

Source Connector

Config	Value Range	Default	Description
cps.subscription	String	REQUIRED (No default)	The Pub/Sub subscription ID, e.g. "baz" for subscription "/projects/bar/subscriptions/baz".
cps.project	String	REQUIRED (No default)	The project containing the Pub/Sub subscription, e.g. "bar" from above.
cps.endpoint	String	"pubsub.googleapis.com:443"	The Pub/Sub endpoint to use.
kafka.topic	String	REQUIRED (No default)	The Kafka topic which will receive messages from the Pub/Sub subscription.
cps.maxBatchSize	Integer	100	The maximum number of messages per batch in a pull request to Pub/Sub.
cps.makeOrderingKeyAttribute	Boolean	false	When true, copy the ordering key to the set of attributes set in the Kafka message.
kafka.key.attribute	String	null	The Pub/Sub message attribute to use as a key for messages published to Kafka. If set to "orderingKey", use the message's ordering key.
kafka.partition.count	Integer	1	The number of Kafka partitions for the Kafka topic in which messages will be published to. NOTE: this parameter is ignored if partition scheme is "kafka_partitioner".
kafka.partition.scheme	round_robin, hash_key, hash_value, kafka_partitioner, ordering_key	round_robin	The scheme for assigning a message to a partition in Kafka. The scheme "round_robin" assigns partitions in a round robin fashion, while the schemes "hash_key" and "hash_value" find the partition by hashing the message key and message value respectively. "kafka_partitioner" scheme delegates partitioning logic to Kafka producer, which by default detects number of partitions automatically and performs either murmur hash based partition mapping or round robin depending on whether message key is provided or not. "ordering_key" uses the hash code of a message's ordering key. If no ordering key is present, uses "round_robin".
gcp.credentials.file.path	String	Optional	The filepath, which stores GCP credentials. If not defined, GOOGLE_APPLICATION_CREDENTIALS env is used.If specified, use the explicitly handed credentials. Consider using the externalized secrets feature in Kafka Connect for passing the value.
gcp.credentials.json	String	Optional	GCP credentials JSON blob. If specified, use the explicitly handed credentials. Consider using the externalized secrets feature in Kafka Connect for passing the value.
kafka.record.headers	Boolean	false	Use Kafka record headers to store Pub/Sub message attributes.
cps.streamingPull.enabled	Boolean	false	Whether to use streaming pull for the connector to connect to Pub/Sub. If provided, cps.maxBatchSize is ignored.
cps.streamingPull.flowControlMessages	Long	1,000	The maximum number of outstanding messages per task when using streaming pull.
cps.streamingPull.flowControlBytes	Long	100L * 1024 * 1024 (100 MiB)	The maximum number of outstanding message bytes per task when using streaming pull.
cps.streamingPull.parallelStreams	Integer	1	The maximum number of outstanding message bytes per task when using streaming pull.
cps.streamingPull.maxAckExtensionMs	Long	0	The maximum number of milliseconds the subscribe deadline will be extended to in milliseconds when using streaming pull. A value of `0` implies the java-pubsub library default value.
cps.streamingPull.maxMsPerAckExtension	Long	0	The maximum number of milliseconds to extend the subscribe deadline for at a time when using streaming pull. A value of `0` implies the java-pubsub library default value.

Sink Connector

Config	Value Range	Default	Description
cps.topic	String	REQUIRED (No default)	The Pub/Sub topic ID, e.g. "foo" for topic "/projects/bar/topics/foo".
cps.project	String	REQUIRED (No default)	The project containing the Pub/Sub topic, e.g. "bar" from above.
cps.endpoint	String	"pubsub.googleapis.com:443"	The Pub/Sub endpoint to use.
maxBufferSize	Integer	100	The maximum number of messages that can be received for the messages on a topic partition before publishing them to Pub/Sub.
maxBufferBytes	Long	10,000,000	The maximum number of bytes that can be received for the messages on a topic partition before publishing them to Pub/Sub.
maxOutstandingRequestBytes	Long	Long.MAX_VALUE	The maximum number of total bytes that can be outstanding (including incomplete and pending batches) before the publisher will block further publishing.
maxOutstandingMessages	Long	Long.MAX_VALUE	The maximum number of messages that can be outstanding (including incomplete and pending batches) before the publisher will block further publishing.
maxDelayThresholdMs	Integer	100	The maximum amount of time to wait to reach maxBufferSize or maxBufferBytes before publishing outstanding messages to Pub/Sub.
maxRequestTimeoutMs	Integer	10,000	The timeout for individual publish requests to Pub/Sub.
maxTotalTimeoutMs	Integer	60,000	The total timeout for a call to publish (including retries) to Pub/Sub.
maxShutdownTimeoutMs	Integer	60,000	The maximum amount of time to wait for a publisher to shutdown when stopping task in Kafka Connect.
gcp.credentials.file.path	String	Optional	The filepath, which stores GCP credentials. If not defined, GOOGLE_APPLICATION_CREDENTIALS env is used.
gcp.credentials.json	String	Optional	GCP credentials JSON blob. If specified, use the explicitly handed credentials. Consider using the externalized secrets feature in Kafka Connect for passing the value.
metadata.publish	Boolean	false	When true, include the Kafka topic, partition, offset, and timestamp as message attributes when a message is published to Pub/Sub.
headers.publish	Boolean	false	When true, include any headers as attributes when a message is published to Pub/Sub.
orderingKeySource	String (none, key, partition)	none	When set to "none", do not set the ordering key. When set to "key", uses a message's key as the ordering key. If set to "partition", converts the partition number to a String and uses that as the ordering key. Note that using "partition" should only be used for low-throughput topics or topics with thousands of partitions.
messageBodyName	String	"cps_message_body"	When using a struct or map value schema, this field or key name indicates that the corresponding value will go into the Pub/Sub message body.
enableCompression	Boolean	false	When true, enable publish-side compression in order to save on networking costs between Kafka Connect and Cloud Pub/Sub.
compressionBytesThreshold	Long	240	When enableCompression is true, the minimum size of publish request (in bytes) to compress.

Pub/Sub Lite connector configs

In addition to the Kafka Connect configurations supplied by the Kafka Connect API, the Pub/Sub Lite connector supports the following configurations:

Source Connector

Config	Value Range	Default	Description
pubsublite.subscription	String	REQUIRED (No default)	The Pub/Sub Lite subscription ID, e.g. "baz" for the subscription "/projects/bar/locations/europe-south7-q/subscriptions/baz".
pubsublite.project	String	REQUIRED (No default)	The project containing the Pub/Sub Lite subscription, e.g. "bar" from above.
pubsublite.location	String	REQUIRED (No default)	The location of the Pub/Sub Lite subscription, e.g. "europe-south7-q" from above.
kafka.topic	String	REQUIRED (No default)	The Kafka topic which will receive messages from Pub/Sub Lite.
pubsublite.partition_flow_control.messages	Long	Long.MAX_VALUE	The maximum number of outstanding messages per Pub/Sub Lite partition.
pubsublite.partition_flow_control.bytes	Long	20,000,000	The maximum number of outstanding bytes per Pub/Sub Lite partition.

Sink Connector

Config	Value Range	Default	Description
pubsublite.topic	String	REQUIRED (No default)	The Pub/Sub Lite topic ID, e.g. "foo" for topic "/projects/bar/locations/europe-south7-q/topics/foo".
pubsublite.project	String	REQUIRED (No default)	The project containing the Pub/Sub Lite topic, e.g. "bar" from above.
pubsublite.location	String	REQUIRED (No default)	The location of the Pub/Sub Lite topic, e.g. "europe-south7-q" from above.

Shared miscellaneous configs

These following configurations are shared by the Pub/Sub and Pub/Sub Lite connectors.

Config	Value Range	Default	Description
gcp.credentials.file.path	String	Optional	The filepath, which stores GCP credentials. If not defined, the environment variable `GOOGLE_APPLICATION_CREDENTIALS` is used. If specified, use the explicitly handed credentials. Consider using the externalized secrets feature in Kafka Connect for passing the value.
gcp.credentials.json	String	Optional	GCP credentials JSON blob. If specified, use the explicitly handed credentials. Consider using the externalized secrets feature in Kafka Connect for passing the value.

Schema support and data model

Pub/Sub Connector

The message data field of PubSubMessage is a ByteString object that translates well to and from the byte[] bodies of Kafka messages. We recommend using a converter that produces primitive data types (i.e. integer, float, string, or bytes types) where possible to avoid deserializing and re-serializing the same message body.

Additionally, a Pub/Sub message cannot exceed 10 MB. We recommend checking your message.max.bytes configuration to prevent possible errors.

The sink connector handles message conversion in the following way:

Integer, float, string, and bytes types in Kafka messages are passed directly into the Pub/Sub message body as bytes.
Map and struct types in Kafka messages are stored as Pub/Sub attributes. Pub/Sub attributes only supports string to string mapping. To make the connector as versatile as possible, the toString() method is called on objects passed in as the key or value for a map and the value for a struct.
- If you set the messageBodyName configuration to a struct field or map key, the value of the structure field or the map value (of integer, byte, float, and array type) will be stored in the Pub/Sub message body as bytes.
Only primitive array types are supported due to potential collisions of field names or keys of a struct/map array. The connector handles arrays in a fairly predictable fashion, where values are concatenated into a ByteString object.
The record-level key for a Kafka message is stored in Pub/Sub message attributes as a string, with the name "key".

Note: Pub/Sub message attributes have the following limitations:

Attributes per message: 100

Attribute key size: 256 bytes

Attribute value size: 1024 bytes

The connector will transform Kafka record-level message headers that meet these limitations and ignore those that don't.

The source connector handles the conversion from a Pub/Sub message into a Kafka SourceRecord in a similar way:

The source connector searches for kafka.key.attribute in the attributes of a Pub/Sub message. If found, it will be used as the Kafka message key as a string. Otherwise, the Kafka message key will be set to null.
If a Pub/Sub message has no attributes, the message body will be stored as a byte[] object for the Kafka message value.
If a Pub/Sub message contains attributes other than kafka.key.attribute, they will be assigned a struct schema. The message attribute keys will become struct field names, and the corresponding attribute values will become values of those struct fields. The message body will be transformed into a struct field of name message and of type bytes.
- To carry forward the structure of data stored in Pub/Sub message attributes, we recommend using a converter that represents a struct schema type, like JsonConverter.

Pub/Sub Lite Connector

Pub/Sub Lite messages have the following structure:

class Message {

  ByteString key;
  ByteString data;
  ListMultimap<String, ByteString> attributes;
  Optional<Timestamp> eventTime;
}

This table shows how each field in a Kafka SinkRecord maps to a Pub/Sub Lite message by the sink connector:

SinkRecord	Message
key{Schema}	key
value{Schema}	data
headers	attributes
topic	attributes["x-goog-pubsublite-source-kafka-topic"]
kafkaPartition	attributes["x-goog-pubsublite-source-kafka-partition"]
kafkaOffset	attributes["x-goog-pubsublite-source-kafka-offset"]
timestamp	eventTime
timestampType	attributes["x-goog-pubsublite-source-kafka-event-time-type"]

When a key, value or header value with a schema is encoded as a ByteString, the following logic will be used:

Null schemas are treated as Schema.STRING_SCHEMA
Top-level BYTES payloads are unmodified
Top-level STRING payloads are encoded using copyFromUtf8
Top-level Integral payloads are converted using copyFromUtf8(Long.toString( x.longValue()))
Top-level Floating point payloads are converted using copyFromUtf8( Double.toString(x.doubleValue()))
All other payloads are encoded into a protobuf Value, then converted to a ByteString
- Nested STRING fields are encoded into a protobuf Value
- Nested BYTES fields are encoded to a protobuf Value holding the base64 encoded bytes
- Nested Numeric fields are encoded as a double into a protobuf Value
- Maps with Array, Map, or Struct keys are not supported
  - BYTES keys in maps are base64 encoded
  - Integral keys are converted using Long.toString(x.longValue())
  - Floating point keys are converted using Double.toString( x.doubleValue())

The source connector performs a one-to-one mapping from SequencedMessage fields to their Kafka SourceRecord counterparts.

Pub/Sub Lite message of empty message.key fields will have their field values be converted to null, and they will be assigned to Kafka partitions using the round-robin scheme. Messages with identical, non-empty keys will be routed to the same Kafka partition.

SequencedMessage	SourceRecord field	SourceRecord schema
message.key	key	BYTES
message.data	value	BYTES
message.attributes	headers	BYTES
`<source topic>`	sourcePartition["topic"]	String field in map
`<source partition>`	sourcePartition["partition"]	Integer field in map
cursor.offset	sourceOffset["offset"]	Long field in map
message.event_time	timestamp	long milliseconds since unix epoch if present
publish_time	timestamp	long milliseconds since unix epoch if no event_time exists

Build the connector

These instructions assume you are using Maven.

Clone this repository:

> git clone https://github.com/googleapis/java-pubsub-group-kafka-connector

Package the connector jar:
```
> mvn clean package -DskipTests=True
```
You should see the resulting jar at target/pubsub-group-kafka-connector-${VERSION}-SNAPSHOT.jar on success.

Versioning

This library follows Semantic Versioning.

Contributing

Contributions to this library are always welcome and highly encouraged.

See CONTRIBUTING for more information how to get started.

Please note that this project is released with a Contributor Code of Conduct. By participating in this project you agree to abide by its terms. See Code of Conduct for more information.

License

Apache 2.0 - See LICENSE for more information.

Name		Name	Last commit message	Last commit date
Latest commit History 174 Commits
.github		.github
.kokoro		.kokoro
config		config
src		src
.gitignore		.gitignore
.repo-metadata.json		.repo-metadata.json
CHANGELOG.md		CHANGELOG.md
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
README.md		README.md
SECURITY.md		SECURITY.md
java.header		java.header
license-checks.xml		license-checks.xml
owlbot.py		owlbot.py
pom.xml		pom.xml
renovate.json		renovate.json
versions.txt		versions.txt

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Google Cloud Pub/Sub Group Kafka Connector

Prerequisites

Quickstart

Acquire the connector

Run the connector

Pub/Sub connector configs

Source Connector

Sink Connector

Pub/Sub Lite connector configs

Source Connector

Sink Connector

Shared miscellaneous configs

Schema support and data model

Pub/Sub Connector

Pub/Sub Lite Connector

Build the connector

Versioning

Contributing

License

About

Releases

Packages

Languages

License

WALTER-GROUP/java-pubsub-group-kafka-connector

Folders and files

Latest commit

History

Repository files navigation

Google Cloud Pub/Sub Group Kafka Connector

Prerequisites

Quickstart

Acquire the connector

Run the connector

Pub/Sub connector configs

Source Connector

Sink Connector

Pub/Sub Lite connector configs

Source Connector

Sink Connector

Shared miscellaneous configs

Schema support and data model

Pub/Sub Connector

Pub/Sub Lite Connector

Build the connector

Versioning

Contributing

License

About

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages