Fixed addresses in 'mcp23x08.hpp'

Wicker25 · Mar 2, 2014 · db4d9c0 · db4d9c0
1 parent 5beaf39
commit db4d9c0
Show file tree

Hide file tree

Showing 5 changed files with 19 additions and 13 deletions.
diff --git a/CMakeLists.txt b/CMakeLists.txt
@@ -7,7 +7,7 @@ cmake_minimum_required( VERSION 2.6 )
 # Set the version of the library
 set( RPI_HW_VERSION_MAJOR	0 )
 set( RPI_HW_VERSION_MINOR	7 )
-set( RPI_HW_VERSION_PATCH	2 )
+set( RPI_HW_VERSION_PATCH	3 )
 set( RPI_HW_VERSION			"${RPI_HW_VERSION_MAJOR}.${RPI_HW_VERSION_MINOR}.${RPI_HW_VERSION_PATCH}" )
 
 # Project directories

diff --git a/ChangeLog b/ChangeLog
@@ -1,5 +1,11 @@
 ChangeLog of Rpi-hw - A free C++ library designed to manage the Raspberry Pi's GPIO connector and its other buses.
 
+============ Rpi-hw 0.7.3 - urgency=high ===========
+
+2014-03-02 Wicker25 < [email protected] >
+
+    * mcp23x08.hpp: Fixed addresses of the registers.
+
 ============ Rpi-hw 0.7.2 - urgency=low ===========
 
 2013-12-26 Wicker25 < [email protected] >

diff --git a/README.md b/README.md
@@ -1,4 +1,4 @@
-Rpi-hw v0.7.2
+Rpi-hw v0.7.3
 =============
 
 [Rpi-hw](http://hackyourmind.org/projects/rpi-hw) (short for "Raspberry Pi Hardware") is a free C++ library 

diff --git a/VERSION b/VERSION
@@ -1 +1 @@
-0.7.2
+0.7.3
diff --git a/include/rpi-hw/driver/mcp23x08.hpp b/include/rpi-hw/driver/mcp23x08.hpp
@@ -54,16 +54,16 @@ class mcp23x08 : public io_expander {
 	enum Registers {
 
 		IODIR		= 0x00,	//!< Controls the direction of the data I/O.
-		IPOL		= 0x02,	//!< Configures the polarity on the corresponding GPIO port bits.
-		GPINTEN		= 0x04,	//!< Controls the interrupt-on-change feature for each pin
-		DEFVAL		= 0x06,	//!< Sets the default comparison value.
-		INTCON		= 0x08, //!< Controls how the associated pin value is compared for the interrupt-on-change feature.
-		IOCON		= 0x0a,	//!< Configures the device.
-		GPPU		= 0x0c,	//!< Controls the pull-up resistors for the port pins.
-		INTF		= 0x0e,	//!< Reflects the interrupt condition on the port pins of any pin that is enabled for interrupts.
-		INTCAP		= 0x10,	//!< Captures the GPIO port value at the time the interrupt occurred.
-		GPIO		= 0x12,	//!< Reflects the value on the port.
-		OLAT		= 0x14,	//!< Provides access to the output latches.
+		IPOL		= 0x01,	//!< Configures the polarity on the corresponding GPIO port bits.
+		GPINTEN		= 0x02,	//!< Controls the interrupt-on-change feature for each pin
+		DEFVAL		= 0x03,	//!< Sets the default comparison value.
+		INTCON		= 0x04, //!< Controls how the associated pin value is compared for the interrupt-on-change feature.
+		IOCON		= 0x05,	//!< Configures the device.
+		GPPU		= 0x06,	//!< Controls the pull-up resistors for the port pins.
+		INTF		= 0x07,	//!< Reflects the interrupt condition on the port pins of any pin that is enabled for interrupts.
+		INTCAP		= 0x08,	//!< Captures the GPIO port value at the time the interrupt occurred.
+		GPIO		= 0x09,	//!< Reflects the value on the port.
+		OLAT		= 0x0a	//!< Provides access to the output latches.
 	};
 
 	//! The controller configuration set (bit flags).