Skip to content

A portable antenna design featuring uni-body, small storage form-factor and short deployment time for satellite QRV outdoor

License

Notifications You must be signed in to change notification settings

XianmingFeng/Foldable-U9-Yagi

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

8 Commits
 
 
 
 
 
 

Repository files navigation

Fold-able 9-El. 430M Yagi Antenna

This is a portable antenna design featuring uni-body, small storage form-factor and short deployment time for satellite QRV outdoor. The antenna is designed for no assembly and fully tool-free deploying. The building processes of this antenna are designed for DIY at home.

This project includes a fold-able boom using hinge, a connector for driven element and a set of element supports featuring fast deployment. They are not limited to this particular antenna, but can be applied to any antenna design with the same boom and element diameters.

The elements' dimensions are based on DK7ZB's Yagis ultralight 9-EL. 70cm 50Ω.

Here is a video demo for this antenna.

The objectives for this project are:

  • Lower the required time of setting up antennas when QRV satellite outdoor.
  • No screw driver is required.
  • Less separated parts possible.
  • Minimal adjustments required.
  • Small form-factor when storage.
  • Enough gain for satellite DX.
  • Cheap to build.
  • Ready for rotator installation.

Many thanks to DK7ZB, BG7XWF, BI7MPS and all the helps and feedback to make this happen.

Without them, this would not be in the current state.

Changes

  • v0.1 (2022-11-20)
    • A new jig for element drilling.
    • A new jig for boom drilling.

Table of Content

Why This

Yagi antennas are usually required when challenging DX via satellite.

  1. To get higher gain, a longer boom is required, resulting in inconvenient carrying of the antenna.
  2. Portable yagis with fixed element supports are hard to store or carry due to the large size.
  3. Detachable elements antennas are easy to carry, but the installation time would be long for all the elements need to be reordered.

Why can't we get a long, high gain antenna with a shorter boom when stored. And a non-fixed elements that no need to detach and assembly?

These are what this project trying to solve.

How it works

How to make one

Components

The fold-able boom requires:

  • Hinge (the thing to connect 2 pieces of booms)
  • Toggle latch (the thing to lock the booms)
  • Adjustment end cap (the thing to make the joint solid)

The element support requires:

  • Support base (3D printed part, two versions)
  • Partial thread bolt (prevent elements from jamming)
  • Spring (to push the elements down to the support)
  • Teflon tube (reduce friction between elements and bolts)
  • Nyloc nut (to lock the bolt)

The driven element connector requires:

  • Fiberglass bar (to connect both side of the elements)
  • POM tube (to keep away two side of elements)
  • Ring terminal (for feeder connection)

The CAD with all the files are located Here.

General Bill of Materials (BOM)

Tools:

  • Drill press
  • 2.0mm Drill
  • 3.0mm Drill
  • 4.0mm Drill
  • 10.0mm Drill (optional)
  • 3D printer
  • M2.5 Tap

Boom BOM:

Component Standard Qty
Aluminum Square Tube 16×16×0.9 2
Stainless Steel Hinge 16×86 4 holes 1
Toggle Latch 10mm hole pitch 1
FH M3 Bolt M3×6 8
Hex Nut M3 8
End Cap 3D printed 2

Support BOM:

Component Standard Qty
Support Base 3D printed 1
SH M3 Bolt M3×20×6 partial thread 1
Teflon Tube Φ4×3×6 1
Spring 4×0.4×5 1
Nyloc Nut M3 1

Connector BOM:

Component Standard Qty
POM Tube Φ6×4×10 1
Fiberglass Bar Φ4×50 1
BH M2.5 Bolt M2.5×4 2
Ring Terminal TBD 2
Washer (Optional) M3 4

How to use it

How to apply this design to your antenna

About

A portable antenna design featuring uni-body, small storage form-factor and short deployment time for satellite QRV outdoor

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published