rest980

rest980 create a http server to map all dorita980 methods in a REST API to control your iRobot Roomba 900 series 980 / i7 / i7+ via HTTP requests.

Build

You can build the package for a specific architecture. Possible values are armhf, arm64, amd64 and i386.

$ dpkg-buildpackage -a armhf -us -uc -b

Install

# dpkg -i rest980_2.1.0~ado1_armhf.deb

Configuration

The configuration file is in /etc/rest980.conf.

Property	Default	Description
ROBOT_IP		(optional) Set if you know your robot IP to skip discovery and speed up startup
BLID		(required) The Roomba blid.
PASSWORD		(required) The Roomba password
FIRMWARE_VERSION	2	(optional) Set to 1 or 2 depends of your robot firmware version. Use `2` for any firmware >=2 (yes, use 2 if you have firmware version 3).
ENABLE_LOCAL	yes	(optional) Set to 'no' if you want to disable local API.
ENABLE_CLOUD	no	(optional) Set to 'no' if you want to disable cloud API.
KEEP_ALIVE	yes	(optional) Set to 'no' if you want to connect and disconnect to the robot in each request (slow but leave the connection free for the official mobile app).
SSL_KEY_FILE		(optional) Set path to key file to enable HTTPS. Both key and cert must be set. (how to create self signed cert)
SSL_CERT_FILE		(optional) Set path to cert file to enable HTTPS. Both key and cert must be set. (how to create self signed cert)
PORT	3000	(required) The HTTP port to listen on

See dorita980 for more information and instructions for obtaining your robot blid and password

Firmware version

Check your robot firmware version! and set your firmware version in firmwareVersion rest980 configuration!

Service

To enable rest980 on reboot:

# systemctl enable rest980

To start and stop the service:

# systemctl start rest980
# systemctl stop rest980

API documentation

Now you can make request to this server on port 3000. There are 2 main endpoints: local and cloud, mapped to dorita980 local and cloud methods as well.

Error responses:

HTTP status 500 and response:

{"message":"human message","error":{}}

Local

Actions

All cleaning actions are under /api/local/action/[action] endpoint using GET method without query params:

Available actions:

start
stop
pause
dock
resume
cleanRoom

Example: start to clean

GET http://192.168.1.110:3000/api/local/action/start

Success Response:

{"ok":null,"id":23}

Example: clean a specific room

Some roomba types support "room specificic cleaning" - at the time of writing, at least the s9 and the i7 support this featrue. Assuming you have this model, and have a "Smart Map" for the floor you're trying to clean, you can send room specific cleaning commands. The easiest way to find out the values for this is to start a room specific clean via the app, and then look at the state endpoint (documented below) and find the lastCommand entry. Using this, you can find the room ids. These seem to be stable over time, unless a re-training or new smart map is saved.

The pmap_id and user_pmapv_id are also derived from the same lastCommand trick. These also seem to be stable - unless a new training run or edit to the smart map happens. It's important to get these correct, else your roomba won't clean.

curl -X POST http://192.168.1.110:3000/api/local/action/cleanRoom -H 'Content-Type: application/json' -d '{"ordered": 0, "pmap_id": "123456", "regions": [{"region_id":"5", "region_name":"Hallway","region_type":"hallway"}], "user_pmapv_id": "987654"}'

Note that this is a POST becuase it has a body, unlike the other related action methods.

Info

All info endpoints are under /api/local/info/[record] using GET method without query params:

Available records:

mission
wireless
lastwireless
sys
sku
state (only in firmware 2)

Example: get current mission variables

GET http://192.168.1.110:3000/api/local/info/mission

Success Response:

{ "ok":
   { "flags": 0,
     "cycle": "none",
     "phase": "charge",
     "pos": { "theta": 179, "point": {"x": 102, "y": -13} },
     "batPct": 99,
     "expireM": 0,
     "rechrgM": 0,
     "error": 0,
     "notReady": 0,
     "mssnM": 0,
     "sqft": 0 },
  "id": 2 }

Configurations

All configuration endpoints are under /api/local/config/[configName] using GET method to get current configuration and POST method to set a new configuration.

Available configName:

ptime (only GET in firmware 1)
bbrun (only GET)
cloud (only GET)
langs (only GET. Use preferences to set lang)
week
time (POST Y GET in firmware 1. Only GET in Firmware 2)
preferences
carpetBoost/auto (only POST. Use preferences to get current config)
carpetBoost/performance (only POST. Use preferences to get current config)
carpetBoost/eco (only POST. Use preferences to get current config)
edgeClean/on (only POST. Use preferences to get current config)
edgeClean/off (only POST. Use preferences to get current config)
cleaningPasses/auto (only POST. Use preferences to get current config)
cleaningPasses/one (only POST. Use preferences to get current config)
cleaningPasses/two (only POST. Use preferences to get current config)
alwaysFinish/on (only POST. Use preferences to get current config)
alwaysFinish/off (only POST. Use preferences to get current config)

See dorita980 documentation for responses and body params for each method and version firmware.

Examples:

Get preferences in firmware 1:

GET http://192.168.1.110:3000/api/local/config/preferences

Success Response:

{ ok:
   { flags: 1024, // See Cleaning Preferences table in dorita980 documentation.
     lang: 2,
     timezone: 'America/Buenos_Aires',
     name: 'myRobotName',
     cleaningPreferences: {
        carpetBoost: 'auto', // 'auto', 'performance', 'eco'
        edgeClean: true,
        cleaningPasses: '1', // '1', '2', 'auto'
        alwaysFinish: true 
      }
    },
 id: 2 }

See dorita980 documentation for preferences in firmware 2.

Set preferences in firmware 1:

POST http://192.168.1.110:3000/api/local/config/preferences

Body:

{ 
  "flags": 1107, // See Cleaning Preferences table in dorita980 documentation.
  "lang": 2,
  "timezone": "America/Buenos_Aires",
  "name": "myRobotName"
}

Success Response:

{"ok":null,"id":293}

See dorita980 documentation for preferences in firmware 2.

Set cleaning passes to two:

POST http://192.168.1.110:3000/api/local/config/cleaningPasses/two

Body:

{}

Success Response:

{"ok":null,"id":293}

Cloud (only for firmware 1.6.x)

Use GET in all info endpoints without query params:

/api/cloud/info/status
/api/cloud/info/history
/api/cloud/info/missionHistory

Use GET in all action endpoints without query params:

/api/cloud/action/clean
/api/cloud/action/quick
/api/cloud/action/spot
/api/cloud/action/dock
/api/cloud/action/start
/api/cloud/action/stop
/api/cloud/action/pause
/api/cloud/action/resume
/api/cloud/action/wake
/api/cloud/action/reset
/api/cloud/action/find
/api/cloud/action/wipe
/api/cloud/action/sleep
/api/cloud/action/off
/api/cloud/action/fbeep

Example:

GET http://192.168.1.110:3000/api/cloud/action/clean

Success Response:

{"status":"OK","method":"multipleFieldSet"}

Host images or files

You can add images or files to public/ folder to serve static files.

Realtime Map (experimental)

Visiting http://serverIP:3000/map with your browser you can play with this cool experiment

Video: Realtime cleaning map

Name		Name	Last commit message	Last commit date
Latest commit History 74 Commits
.github		.github
bin		bin
cert		cert
config		config
debian		debian
public		public
routes		routes
views		views
.eslintignore		.eslintignore
.eslintrc.json		.eslintrc.json
.gitignore		.gitignore
.travis.yml		.travis.yml
Dockerfile		Dockerfile
LICENSE		LICENSE
README.md		README.md
app.js		app.js
package.json		package.json

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

rest980

Build

Install

Configuration

Firmware version

Service

API documentation

Error responses:

Local

Actions

Info

Configurations

Examples:

Get preferences in firmware 1:

Set preferences in firmware 1:

Set cleaning passes to two:

Cloud (only for firmware 1.6.x)

Host images or files

Realtime Map (experimental)

About

Releases 4

Packages

Languages

License

adelolmo/rest980

Folders and files

Latest commit

History

Repository files navigation

rest980

Build

Install

Configuration

Firmware version

Service

API documentation

Error responses:

Local

Actions

Info

Configurations

Examples:

Get preferences in firmware 1:

Set preferences in firmware 1:

Set cleaning passes to two:

Cloud (only for firmware 1.6.x)

Host images or files

Realtime Map (experimental)

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 4

Packages 0

Languages

Packages