Skip to content

ademuri/laundry-monitor

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

35 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Laundry Monitor

This is an Arduino sketch that sends an SMS when an appliance has finished running. It uses an analog current sensor.

Dashboard

The code creates a web dashboard. You can use mDNS to easily access this dashboard. From any browser except on Android, navigate to laundry-monitor.local/ to see the sensor values, appliance states, and uptime.

Current sensor

I use this Modern Devices sensor. This sensor is unique among current sensors in that it doesn't require modifying the cord of the appliance. Traditional (split-core) current sensors must be attached to a single conductor, rather than the entire cord, or they won't work. The Modern Devices sensor sends an analog voltage between GND and VIN depending on the measured current. It seems to have relatively low noise (i.e. when the appliance is off, it returns 0).

Tuning

The current sensors are very sensitive to position - you may need to fiddle around a bit to find the position that works. All you need is for the sensor to consistently be non-zero when the appliance is running. The sensor should mostly report zero when the appliance is off. There is filtering on the sensor, so small amounts of noise are OK.

Platform

I run this on an ESP32 dev board, the DOIT ESP32 Devkit v1, using the Arduino environment. It should work on any ESP32-based board. Note that ADC2 is unusable while WiFi is enabled, so you'll need to connect the sensor to ADC1.

This uses the smart input filter and Twilio ESP32 client libraries.

Configuration

You'll need to provide some user-specific configuration values. Copy constants.sample.h to constants.h (which is automatically ignored by Git, for safety). Then fill out the following fields.

WiFi

Enter the ssid and password for your wifi network.

Twilio

This sketch uses Twilio to send SMS. The account_sid, auth_token, and from_number are all available on the Twilio dashboard. You need to rent a phone number from Twilio to be able to send SMS (the from_number).

People

This project can notify multiple people. Each person has a phone number and pins for input and output. The input pin is used to turn on and off notifications. The output pin drives an LED to display the notification status (on or off).

Programming

The first time you load this sketch, you'll need to program as normal:

$ pio run -t upload

You may need to specify the port using --upload-port.

After that, you can use ArduinoOTA to update the sketch over WiFi:

$ pio run -t upload --upload-port laundry-monitor.local

This can be a little flaky, so you may have to try a few times.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published