Skip to content

Python script to manage Sony DPT-RP1 without Digital Paper App

License

Notifications You must be signed in to change notification settings

alex-fu27/dpt-rp1-py

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

dpt-rp1-py

Python script to manage Sony DPT-RP1 without the Digital Paper App. This repository includes a Python library and a command line utility to manage documents on the DPT-RP1. Tested on Windows, Linux, and macOS. Should also work for Sony's other digital paper readers.

Installation

We now have a proper Python package, so you may just run:

pip3 install dpt-rp1-py

Installing the package also installs the command line utilities dptrp1 and dptmount.

From Source

To install the library from the sources, clone this repository, then run python3 setup.py install or pip3 install . from the root directory. To install as a developer use python3 setup.py develop (see the setuptools docs) and work on the source as usual.

Using the command line utility

dptrp1 command [arguments]

To see if you can successfully connect to the reader, try the command dptrp1 list-documents. If you have Sony's Digital Paper App installed, this should work without any further configuration. If this fails, register your reader with the app using dptrp1 register.

Supported commands

You can get a list of the implemented commands by running dptrp1 with no additional arguments. Supported commands include command-help, copy-document, delete, delete-folder, download, list-documents, list-folders, move-document, new-folder, register, screenshot, sync, update-firmware, upload, wifi, wifi-add, wifi-del, wifi-disable, wifi-enable, wifi-list, and wifi-scan.

For some command, you can get additional help by calling dptrp1 command-help <command>, e.g. dptrp1 command-help sync.

Note that the root path for DPT-RP1 is Document/. Example command to download a document file.pdf from the root folder ("System Storage") of DPT-RP1: dptrp1 download Document/file.pdf ./file.pdf. Example command to upload a document file.pdf to a folder named Articles on DPT-RP1: dptrp1 upload ./file.pdf Document/Articles/file.pdf

Registering the DPT-RP1

The DPT-RP1 uses SSL encryption to communicate with the computer. This requires registering the DPT-RP1 with the computer, which results in two pieces of information -- the client ID and the key file -- that you'll need to run the script. You can get this information in three ways.

Registering without the Digital Paper App

This method requires your DPT-RP1 and your computer to be on the same network segment via WiFi, Bluetooth or a USB connection. The USB connection works on Windows and macOS but may not work on a Linux machine.

dptrp1 register

The tool can generally figure out the correct IP address of the device automatically, but you may also specify it with the --addr <address> option. If you're on WiFi, go to Wi-Fi Settings on the device and tap the connected network to see the device's address. If you use a Bluetooth connection, it's likely 172.25.47.1. You can also try the hostname digitalpaper.local. Use the register command like seen below, substituting the IP address of the device.

dptrp1 --addr 10.0.0.1 register

If you get an error, wait a few seconds and try again. Sometimes it takes two or three tries to work.

Mounting as a file system

This Repository contains a dptmount script to mount the Digital Paper as a userspace mount. This tool has additional requirements.

  • On macOS, install osxfuse (e.g. with brew cask install osxfuse).
  • On Linux, you may need to install libfuse.

How to use

Create a yaml file with configuration details at ~/.config/dpt-rp1.conf. You must specify either an address (with addr) or a Device ID (with serial). Everything else is optional. All entries must be strings, the serial number must be wrapped in quotation marks.

dptrp1:
  addr: 192.168.0.200
  serial: "50040222"
  client-id: ~/.config/dpt/deviceid.dat
  key: ~/.config/dpt/privatekey.dat

Mount the Digital Paper to a directory with dptmount /my/mountpoint/.

Finding the private key and client ID on Windows

If you have already registered on Windows, the Digital Paper app stores the files in Users/{username}/AppData/Roaming/Sony Corporation/Digital Paper App/. You'll need the files deviceid.dat and privatekey.dat.

Finding the private key and client ID on macOS

If you have already registered on macOS, the Digital Paper app stores the files in $HOME/Library/Application Support/Sony Corporation/Digital Paper App/. You'll need the files deviceid.dat and privatekey.dat.

What works

  • Reading files
  • Moving files (both rename and move to different folder)
  • Uploading new files
  • Deleting files and folders

What does not work

  • Currently there is no caching, therefore operations can be slow as they require uploading or downloading from the device. However, this avoids having to resolve conflicts if a document has been changed both on the Digital Paper and the caching directory.

About

Python script to manage Sony DPT-RP1 without Digital Paper App

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%