Getting Started

To quickly get started with Piko, this example uses docker compose to deploy a cluster of three Piko server nodes behind a load balancer. You may then register upstream services to handle incoming requests proxied by Piko.

Cluster

Start by cloning Piko and downloading the Piko binary from the releases page:

git clone [email protected]:andydunstall/piko.git
cd piko

You can also build Piko yourself with:

make piko
make image

Which will build the Piko binary at bin/piko and Docker image piko:latest.

Next start the Piko cluster:

cd docs/demo
docker compose up

This creates a cluster with three Piko server nodes and an NGINX load balancer. The following ports are exposed:

• Proxy (localhost:8000): Forwards proxy requests to registered endpoints
• Upstream (localhost:8001): Accepts connections from upstream services
• Admin (localhost:8002): Handles admin requests for metrics, status API and health checks

You can verify Piko has started and discovered the other nodes in the cluster by running piko server status cluster nodes, which will request the set of known nodes from the Piko admin API (routed to a random node), such as:

$ piko server status cluster nodes
nodes:
- id: piko-1-fuvaflv
  status: active
  proxy_addr: 172.18.0.3:8000
  admin_addr: 172.18.0.3:8002
  endpoints: 0
  upstreams: 0
- id: piko-2-rjtlyx1
  status: active
  proxy_addr: 172.18.0.4:8000
  admin_addr: 172.18.0.4:8002
  endpoints: 0
  upstreams: 0
- id: piko-3-p3wnt2z
  status: active
  proxy_addr: 172.18.0.2:8000
  admin_addr: 172.18.0.2:8002
  endpoints: 0
  upstreams: 0

You can also use the --forward flag to forward the request to a particular node, such as piko server status cluster nodes --forward piko-3-p3wnt2z.

The cluster also includes Prometheus and Grafana to inspect the cluster metrics. You can open Grafana at http://localhost:3000.

Agent

The Piko agent is a lightweight proxy that runs alongside your upstream services. It connects to the Piko server and registers endpoints, then forwards incoming requests to your services.

First create a local HTTP server to forward requests to, such as python3 -m http.server 4000 so serve the files in the local directory on port 4000.

Then run the Piko agent and register endpoint my-endpoint using:

piko agent http my-endpoint 4000

This will connect to the cluster load balancer, which routes the request to a random Piko node. That outbound connection is then used to route requests for that endpoint from Piko to the agent. Then agent will then forward the request to your service.

See piko agent -h for the available options.

You can verify the upstream has connected and registered the endpoint by running piko server status cluster nodes again, which will now show one of the nodes has a connected stream and registered endpoint:

$ piko server status cluster nodes
nodes:
- id: piko-1-fuvaflv
  status: active
  proxy_addr: 172.18.0.3:8000
  admin_addr: 172.18.0.3:8002
  endpoints: 1
  upstreams: 1
- ...

You can also inspect the upstreams connected for that registered endpoint with piko server status proxy endpoints --forward <node ID>. Such as in the above example the upstream is connected to node piko-1-fuvaflv:

$ piko server status proxy endpoints --forward piko-1-fuvaflv
endpoints:
  my-endpoint:
  - 172.18.0.7:39084

Request

When sending a request to Piko, you can identify the endpoint to route the request to using either the Host or x-piko-endpoint header.

Therefore to send a request to the registered endpoint, my-endpoint, use either:

# x-piko-endpoint
curl http://localhost:8000 -H "x-piko-endpoint: my-endpoint"

# Host
curl --connect-to my-endpoint.example.com:8000:localhost:8000 http://my-endpoint.example.com:8000

This request will be load balanced among the Piko servers, then forwarded to the endpoint registered above.