Skip to content

archilogic-com/aws-marketplace-serverless-saas-integration

 
 

Repository files navigation

AWS Marketplace - Serverless integration for SaaS products (Example)

This project provides example of serverless integration for SaaS products listed on the AWS Marketplace.

If you are a new seller on AWS Marketplace, we advise you to check the following resources:

Project Structure

The sample in this repository demonstrates how to use AWS SAM (Serverless application mode) to integrate your SaaS product with AWS Marketplace and how to perform:

Register new customers

With SaaS subscriptions and SaaS contracts, your customers subscribe to your products through AWS Marketplace, but access the product on environment you manage in your AWS account. After subscribing to the product, your customer is directed to a website you create and manage as a part of your SaaS product to register their account and configure the product.

When creating your product, you provide a URL to your registration landing page. AWS Marketplace uses that URL to redirect customers to your registration landing page after they subscribe. On your software's registration URL, you collect whatever information is required to create an account for the customer. AWS Marketplace recommends collecting your customer’s email addresses if you plan to contact them through email for usage notifications.

The registration landing page needs to be able to identify and accept the x-amzn-marketplace-token token in the form data from AWS Marketplace with the customer’s identifier for billing. It should then pass that token value to the AWS Marketplace Metering Service and AWS Marketplace Entitlement Service APIs to resolve for the unique customer identifier and corresponding product code.

NOTE: Deploying the static landing page is optional. You can choose to use your existing SaaS registration page, after collecting the data you should call the register new subscriber endpoint. Please see the deployment section.

Implementation

In this sample we created CloudFront Distribution, which can be configured to use domain/CNAME by your choice. AWS initial request processed by https://microservices.archilogic.com/auth/signup-marketplace The handler for the marketplace/customer creation is defined in the microservices/apps/auth lambda, where we call the resolveCustomer and validate the token. If the token is valid the customer record is created in the AWSMarketplaceSubscribers DynamoDB table and the new customer data are stored.

Grant and revoke access to your product

Grant access to new subscribers

Once the resolveCustomer endpoint return successful response, the SaaS vendors must to provide access to the solution to the new subscriber. Based on the type of listing contract or subscription we have defined different conditions in the grant-revoke-access-to-product.js stream handler that is executed on adding new or updating existing rows.

In our implementation the Marketplace Tech Admin (The email address you have entered when deploying), will receive email when new environment needs to be provisioned or existing environment needs to be updated. AWS Marketplace strongly recommends automating the access and environment management which can be achieved by modifying the grant-revoke-access-to-product.js function.

The property successfully subscribed is set when successful response is returned from the SQS entitlement handler for SaaS Contract based listings or after receiving **subscribe-success message from the Subscription SNS Topic in the case of AWS SaaS subscriptions in the subscription-sqs-handler.js.

Update entitlement levels to new subscribers (SaaS Contracts only)

Each time the entitlement is update we receive message on the SNS topic. The lambda function entitlement-sqs.js on each message is calling the marketplaceEntitlementService and storing the response in the dynamoDB.

We are using the same DynamoDB stream to detect changes in the entailment for SaaS contracts. When the entitlement is update notification is sent to the MarketplaceTechAdmin.

Revoke access to customers with expired contracts and cancelled subscriptions

The revoke access logic is implemented in a similar manner as the grant access logic.

In our implementation the MarketplaceTechAdmin receives email when the contract expires or the subscription is cancelled. AWS Marketplace strongly recommends automating the access and environment management which can be achieved by modifying the grant-revoke-access-to-product.js function.

Metering for usage

For SaaS subscriptions, the SaaS provider must meter for all usage, and then customers are billed by AWS based on the metering records provided. For SaaS contracts, you only meter for usage beyond a customer’s contract entitlements. When your application meters usage for a customer, your application is providing AWS with a quantity of usage accrued. Your application meters for the pricing dimensions that you defined when you created your product, such as gigabytes transferred or hosts scanned in a given hour.

Implementation

We have created MeteringSchedule CloudWatch Event rule that is triggered every hour. The metering-hourly-job.js gets triggered by this rule and it's querying all of the pending/unreported metering records from the AWSMarketplaceMeteringRecords table using the PendingMeteringRecordsIndex. All of the pending records are aggregated based on the customerIdentifier and dimension name, and sent to the SQSMetering queue. The records in the AWSMarketplaceMeteringRecords table are expected to be inserted programmatically by your SaaS application. In this case you will have to give permissions to the service in charge of collecting usage data in your existing SaaS product to be able to write to AWSMarketplaceMeteringRecords table.

The lambda function metering-sqs.js is sending all of the queued metering records to the AWS Marketplace Metering service. After every call to the batchMeterUsage endpoint the rows are updated in the AWSMarketplaceMeteringRecords table, with the response returned from the Metering Service, which can be found in the metering_response field. If the request was unsuccessful the metering_failed value with be set to true and you will have to investigate the issue the error will be also stored in the metering_response field.

The new records in the AWSMarketplaceMeteringRecords table should be stored in the following format:

{
  "create_timestamp": {
    "N": "113123"
  },
  "customerIdentifier": {
    "S": "ifAPi5AcF3"
  },
  "dimension_usage": {
    "L": [
      {
        "M": {
          "dimension": {
            "S": "users"
          },
          "value": {
            "N": "3"
          }
        }
      },
      {
        "M": {
          "dimension": {
            "S": "admin_users"
          },
          "value": {
            "N": "1"
          }
        }
      }
    ]
  },
  "metering_pending": {
    "S": "true"
  }
}

Where the create_timestamp is the sort key and customerIdentifier is the partition key, and they are both forming the Primary key. Note:The new records format is in DynamoDB JSON format. It is different than JSON. The accepted time stamp is UNIX timestamp in UTC time.

After the record is submitted to AWS Marketplace BatchMeterUsage API, it will be updated and it will look like this:

{
  "create_timestamp": 113123,
  "customerIdentifier": "ifAPi5AcF3",
  "dimension_usage": [
    {
      "dimension": "admin_users",
      "value": 3
    }
  ],
  "metering_failed": false,
  "metering_response": "{\"Results\":[{\"UsageRecord\":{\"Timestamp\":\"2020-06-24T04:04:53.776Z\",\"CustomerIdentifier\":\"ifAPi5AcF3\",\"Dimension\":\"admin_users\",\"Quantity\":3},\"MeteringRecordId\":\"35155d37-56cb-423f-8554-5c4f3e3ff56d\",\"Status\":\"Success\"}],\"UnprocessedRecords\":[]}"
}

Deploy the sample application

The Serverless Application Model Command Line Interface (SAM CLI) is an extension of the AWS CLI that adds functionality for building and testing Lambda applications. It uses Docker to run your functions in an Amazon Linux environment that matches Lambda. It can also emulate your application's build environment and API.

To use the SAM CLI, you need the following tools.

To build and deploy your application, you must sign in to the AWS Management Console with IAM permissions for the resources that the templates deploy. For more information, see AWS managed policies for job functions. Your organization may choose to use a custom policy with more restrictions. These are the AWS services that you need permissions to create as part of the deployment:

  • AWS IAM role
  • Amazon CloudWatch Logs
  • Amazon CloudFront
  • Amazon S3 bucket
  • AWS CloudFormation stack
  • AWS Lambda function
  • Amazon API Gateway
  • Amazon DynamoDB database
  • Amazon SQS queue
  • Amazon SNS topic
  • Amazon EventBridge

To build and deploy your application for the first time, run the following in your shell:

#Replace all `<PLACEHOLDER_VALUES>` with their `actual values` (e.g. `<PROJECT_NAME>` with `My Cool Project`).
#Create non-public bucket for <DEPLOYMENT_ARTEFACT_S3_BUCKET> before running this script

sam build
sam package --output-template-file packaged.yaml --s3-bucket <DEPLOYMENT_ARTEFACT_S3_BUCKET>

sam deploy --template-file packaged.yaml --stack-name <STACK_NAME> --capabilities CAPABILITY_IAM \
--region us-east-1 \
--parameter-overrides \
ParameterKey=WebsiteS3BucketName,ParameterValue=<WEBSITE_BUCKET_NAME> \
ParameterKey=ProductCode,ParameterValue=<MARKETPLACE_PRODUCT_CODE> \
ParameterKey=EntitlementSNSTopic,ParameterValue=<MARKETPLACE_ENTITLEMENT_SNS_TOPIC> \
ParameterKey=SubscriptionSNSTopic,ParameterValue=<MARKETPLACE_SUBSCRIPTION_SNS_TOPIC> \
ParameterKey=MarketplaceTechAdminEmail,ParameterValue=<MARKETPLACE_TECH_ADMIN_EMAIL>

#If you want to notify your buyer of successful purchase then you can use the following to deploy your application
sam deploy --template-file packaged.yaml --stack-name <STACK_NAME> --capabilities CAPABILITY_IAM \
--region us-east-1 \
--parameter-overrides \
ParameterKey=WebsiteS3BucketName,ParameterValue=<WEBSITE_BUCKET_NAME> \
ParameterKey=ProductCode,ParameterValue=<MARKETPLACE_PRODUCT_CODE> \
ParameterKey=EntitlementSNSTopic,ParameterValue=<MARKETPLACE_ENTITLEMENT_SNS_TOPIC> \
ParameterKey=SubscriptionSNSTopic,ParameterValue=<MARKETPLACE_SUBSCRIPTION_SNS_TOPIC> \
ParameterKey=MarketplaceTechAdminEmail,ParameterValue=<MARKETPLACE_TECH_ADMIN_EMAIL> \
ParameterKey=MarketplaceSellerEmail,ParameterValue=<SELLERSESVERIFIEDEMAILADDRESS>

#Check the account for <MARKETPLACE_TECH_ADMIN_EMAIL> and approve the subscription to SNS

#Replace the baseUrl in web/script.js with the API Gateway endpoint URL 

aws s3 cp ./web/ s3://<WEBSITE_BUCKET_NAME>/ --recursive

#add a CNAME record to your DNS to route the url you put on your offering to the cloudformation endpoint

#add the domain used for your marketplace URL to the CNAME on the cloudformation config

List of parameters

Parameter name Description
WebsiteS3BucketName S3 bucket to store the HTML files; Mandatory if CreateRegistrationWebPage is set to true; will be created
NewSubscribersTableName Use customer name for the New Subscribers Table; Default value: AWSMarketplaceSubscribers
AWSMarketplaceMeteringRecordsTableName Use customer name for the Metering Records Table; Default value: AWSMarketplaceMeteringRecords
TypeOfSaaSListing allowed values: contracts_with_subscription, contracts, subscriptions; Default value: contracts_with_subscription
ProductCode Product code provided from AWS Marketplace
EntitlementSNSTopic SNS topic ARN provided from AWS Marketplace. Must exist.
SubscriptionSNSTopic SNS topic ARN provided from AWS Marketplace. Must exist.
CreateRegistrationWebPage true or false; Default value: true
MarketplaceTechAdminEmail Email to be notified on changes requiring action
MarketplaceSellerEmail Seller email address, verified in SES and in 'Production' mode

Diagram of created resources

Based on the value of the TypeOfSaaSListing parameter different set of resources will be created.

In the case of contracts_with_subscription all of the resources depicted on the diagram below will be created.

In the case of a contracts, the resources market with orange circles will not be created.

In the case of a subscriptions the resources market with purple circles will not be created.

The landing page is optional. Use the CreateRegistrationWebPage parameter.

Cleanup

To delete the sample application that you created, use the AWS CLI. Assuming you used your project name for the stack name, you can run the following:

aws cloudformation delete-stack --stack-name app

Security

See CONTRIBUTING for more information.

License

This library is licensed under the MIT-0 License. See the LICENSE file.

About

Example of serverless integration for SaaS products listed on the AWS Marketplace.

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • JavaScript 84.6%
  • HTML 10.8%
  • CSS 4.6%