The Zenith client establishes a secure tunnel with a Zenith server and ensures that traffic received over that tunnel is forwarded to the proxied service.
The Zenith client is a command-line application written in Python. It can be used either directly via a console script or in a container.
If possible, using the container image is preferred as it minimises the potential issues with dependencies and the environment.
The Zenith client is made available on GitHub Packages as a multi-arch container image that is built for both AMD64 and ARM64:
docker run --rm ghcr.io/azimuth-cloud/zenith-client:main zenith-client --helpThe Zenith client can also be installed directly from GitHub using pip:
# Install the Zenith client
pip install git+https://github.com/azimuth-cloud/zenith.git#subdirectory=client
# Show the Zenith client help
zenith-client --helpWhen using the Zenith client to expose a long-running service, it is important to deploy the client in a way that means it can automatically recover from failures. In general, it should be assumed that the SSH tunnel established between a Zenith client and a Zenith server could fail at any time due to issues with the server, the client or the network in-between.
In particular, it is important to run the Zenith client in such a way that it will be restarted if
it exits with an error condition. Typically this would be done using a supervising process, e.g. by
running the Zenith client as a systemd service or using a
process monitor like Supervisor. If you are running the Zenith client as
a Docker container, this can be achieved by setting an appropriate
Docker restart policy
such as on-failure for the container.
The Zenith client has two subcommands - init and connect. The init command is run once to
initialise the client by generating an SSH keypair, if required, and uploading the public key
to the registrar using the token supplied by the broker. The connect command then uses the
keypair registered by the init command to establish a secure tunnel for the proxied service.
The connect command can be run more than once.
The Zenith client can be configured in three ways, in order of precedence:
- Command-line arguments
- Environment variables
- Configuration file
Not all options are available via the command line, so environment variables or a config file are recommended for most situations.
The location of the configuration file can be specified using either the --config command-line
argument or the ZENITH_CLIENT_CONFIG environment variable, with /etc/zenith/client.yaml
used by default if present.
This section describes the most commonly used options. For a full list of the available options see
zenith-client [init|connect] --help or the
Zenith client configuration objects.
The init and connect commands both require access to the same SSH identity, specified as
a path. The connect command requires the identity to exist at the given path before it can run,
but the init command will generate a new keypair at the specified path if one does not exist.
The path to the SSH identity is specified using the following option:
ssh_identity_path: The path to the SSH identity to use, e.g.$HOME/.ssh/id_zenith.- CLI argument:
--ssh-identity-path - Environment variable:
ZENITH_CLIENT__SSH_IDENTITY_PATH - Default: This option is required.
- CLI argument:
The init command is responsible for uploading the client's public key to the Zenith registrar.
To do this, the init command must be configured with the URL for the Zenith registrar and
a token issued by the registrar for a reserved subdomain (via an implementation-specific broker).
This is done with the following options:
registrar_url: The URL of the Zenith registrar, e.g.https://registrar.example.cloud.- CLI argument:
--registrar-url - Environment variable:
ZENITH_CLIENT__REGISTRAR_URL - Default: This option is required.
- CLI argument:
token: The token issued by the Zenith registrar.- CLI argument:
--token - Environment variable:
ZENITH_CLIENT__TOKEN - Default: This option is required.
- CLI argument:
The Zenith client connects to a Zenith SSHD server to establish a secure tunnel. To do this, the client must be configured with the correct address and port for the Zenith SSHD server. This is done with the following options:
server_address: The address of the Zenith SSHD server, e.g.sshd.example.cloudor193.154.167.25.- CLI argument:
--server-address - Environment variable:
ZENITH_CLIENT__SERVER_ADDRESS - Default: This option is required.
- CLI argument:
server_port: The port of the Zenith SSHD server.- CLI argument:
--server-port - Environment variable:
ZENITH_CLIENT__SERVER_PORT - Default:
22
- CLI argument:
The Zenith client forwards traffic that arrives down the SSH tunnel to another, locally available service. To do this, the Zenith client must be configured with an address and a port to which traffic should be forwarded. This is done with the following options:
forward_to_host: The host to forward tunnel traffic to, e.g.127.0.0.1.- CLI argument:
--forward-to-host - Environment variable:
ZENITH_CLIENT__FORWARD_TO_HOST - Default:
localhost
- CLI argument:
forward_to_port: The port to forward tunnel traffic to, e.g.5000.- CLI argument:
--forward-to-port - Environment variable:
ZENITH_CLIENT__FORWARD_TO_PORT - Default:
8000
- CLI argument:
By default, Zenith assumes that the services being proxied use the HTTP protocol. If the service implements TLS, then Zenith must be told to use HTTPS instead.
backend_protocol: The protocol of the proxied service, one ofhttporhttps.- CLI argument: Not available as a CLI argument.
- Environment variable:
ZENITH_CLIENT__BACKEND_PROTOCOL - Default:
http
Zenith is able to enforce authentication, either using OpenID Connect (OIDC) or by calling out to an external auth service.
A Zenith client can also opt out of any authentication that is imposed at the server. This can be useful for services that should be anonymously available or that enforce their own authentication.
skip_auth: Indicates if authentication should be skipped for this client.- CLI argument: Not available as a CLI argument.
- Environment variable:
ZENITH_CLIENT__SKIP_AUTH - Default:
false
The Zenith server supports using OpenID Connect (OIDC) to provide authentication and authorisation for proxied services. This can be imposed on the server side using a discovery mechanism (see Deploying and configuring a Zenith server), but clients are able to override the OIDC parameters in order to use a specific OIDC issuer.
In order to do this, the client must have a client ID and secret from the target OIDC issuer.
Obtaining these credentials is out-of-scope of the Zenith components. The redirect URL of
the client must be https://{allocated FQDN}/_oidc/callback.
The given issuer URL should be such that the OpenID configuration can be discovered at
{auth_oidc_issuer}/.well-known/openid-configuration.
auth_oidc_issuer: The URL of the OIDC issuer to use.- CLI argument: Not available as a CLI argument.
- Environment variable:
ZENITH_CLIENT__AUTH_OIDC_ISSUER - Default:
None
auth_oidc_client_id: The client ID of the OIDC client to use.- CLI argument: Not available as a CLI argument.
- Environment variable:
ZENITH_CLIENT__AUTH_OIDC_CLIENT_ID - Default:
None
auth_oidc_client_secret: The client secret of the OIDC client to use.- CLI argument: Not available as a CLI argument.
- Environment variable:
ZENITH_CLIENT__AUTH_OIDC_CLIENT_SECRET - Default:
None
auth_oidc_allowed_groups: List of groups that are allowed to access the service.- CLI argument: Not available as a CLI argument.
- Environment variable:
ZENITH_CLIENT__AUTH_OIDC_ALLOWED_GROUPS(comma-separated list) - Default:
[]
When the server supports external auth, a Zenith client can specify a dictionary of parameters
that will be passed to the auth service as headers of the form x-auth-{key}: {value}. The
authentication service can then use these headers to make an authorization decision.
auth_external_params: Parameters for the external auth service.- CLI argument: Not available as a CLI argument.
- Environment variables of the form
ZENITH_CLIENT__AUTH_EXTERNAL_PARAMS__{KEY}, e.g.ZENITH_CLIENT__AUTH_EXTERNAL_PARAMS__OPENSTACK_PROJECT - Default:
{}