-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
- Loading branch information
Showing
5 changed files
with
424 additions
and
6 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -1,5 +1,83 @@ | ||
| ABS+ | ||
| Material: {{material}} | ||
| Name: {{name}} | ||
| settings_extruder_temp + 10: {{ settings_extruder_temp + 10 }} | ||
| settings_extruder_temp: {{ settings_extruder_temp }} | ||
| # generated by {{sm2s.name}} {{sm2s.version}} on {{sm2s.now}} | ||
| bed_temperature = {{settings_bed_temp|int}} | ||
| bridge_fan_speed = -1 | ||
| bridge_internal_fan_speed = -1 | ||
| chamber_temperature = 50 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| external_perimeter_fan_speed = -1 | ||
| extrusion_multiplier = 0.924 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 0 | ||
| filament_colour = #{{color_hex}} | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cooling_zone_pause = 0 | ||
| filament_cost = {{price}} | ||
| filament_custom_variables = "" | ||
| filament_density = {{density}} | ||
| filament_deretract_speed = nil | ||
| filament_diameter = {{diameter}} | ||
| filament_dip_extraction_speed = 70 | ||
| filament_dip_insertion_speed = 33 | ||
| filament_enable_toolchange_part_fan = 0 | ||
| filament_enable_toolchange_temp = 0 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_overlap = 100% | ||
| filament_max_speed = 0 | ||
| filament_max_volumetric_speed = 0 | ||
| filament_max_wipe_tower_speed = 0 | ||
| filament_melt_zone_pause = 0 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_seam_gap = nil | ||
| filament_settings_id = "{{id}}" | ||
| filament_shrink = 100% | ||
| filament_skinnydip_distance = 31 | ||
| filament_soluble = 0 | ||
| filament_spool_weight = {{spool_weight}} | ||
| filament_toolchange_delay = 0 | ||
| filament_toolchange_part_fan_speed = 50 | ||
| filament_toolchange_temp = 200 | ||
| filament_type = {{material}} | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_use_fast_skinnydip = 0 | ||
| filament_use_skinnydip = 0 | ||
| filament_vendor = "{{vendor.name}}" | ||
| filament_wipe = nil | ||
| filament_wipe_advanced_pigment = 0.5 | ||
| filament_wipe_extra_perimeter = nil | ||
| filament_wipe_only_crossing = nil | ||
| filament_wipe_speed = nil | ||
| first_layer_bed_temperature = {{settings_bed_temp|int + 10}} | ||
| first_layer_temperature = {{settings_extruder_temp|int + 5}} | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 100 | ||
| max_speed_reduction = 90% | ||
| min_fan_speed = 50 | ||
| min_print_speed = 10 | ||
| slowdown_below_layer_time = 15 | ||
| start_filament_gcode = "; Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE={{extra.pressure_advance|default(0)|float}}\nASSERT_ACTIVE_FILAMENT ID={{id}}\n" | ||
| temperature = {{settings_extruder_temp|int}} | ||
| top_fan_speed = -1 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,83 @@ | ||
| # generated by {{sm2s.name}} {{sm2s.version}} on {{sm2s.now}} | ||
| bed_temperature = {{settings_bed_temp|int}} | ||
| bridge_fan_speed = -1 | ||
| bridge_internal_fan_speed = -1 | ||
| chamber_temperature = 50 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| external_perimeter_fan_speed = -1 | ||
| extrusion_multiplier = 0.924 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 0 | ||
| filament_colour = #{{color_hex}} | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cooling_zone_pause = 0 | ||
| filament_cost = {{price}} | ||
| filament_custom_variables = "" | ||
| filament_density = {{density}} | ||
| filament_deretract_speed = nil | ||
| filament_diameter = {{diameter}} | ||
| filament_dip_extraction_speed = 70 | ||
| filament_dip_insertion_speed = 33 | ||
| filament_enable_toolchange_part_fan = 0 | ||
| filament_enable_toolchange_temp = 0 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_overlap = 100% | ||
| filament_max_speed = 0 | ||
| filament_max_volumetric_speed = 0 | ||
| filament_max_wipe_tower_speed = 0 | ||
| filament_melt_zone_pause = 0 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_seam_gap = nil | ||
| filament_settings_id = "{{id}}" | ||
| filament_shrink = 100% | ||
| filament_skinnydip_distance = 31 | ||
| filament_soluble = 0 | ||
| filament_spool_weight = {{spool_weight}} | ||
| filament_toolchange_delay = 0 | ||
| filament_toolchange_part_fan_speed = 50 | ||
| filament_toolchange_temp = 200 | ||
| filament_type = {{material}} | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_use_fast_skinnydip = 0 | ||
| filament_use_skinnydip = 0 | ||
| filament_vendor = "{{vendor.name}}" | ||
| filament_wipe = nil | ||
| filament_wipe_advanced_pigment = 0.5 | ||
| filament_wipe_extra_perimeter = nil | ||
| filament_wipe_only_crossing = nil | ||
| filament_wipe_speed = nil | ||
| first_layer_bed_temperature = {{settings_bed_temp|int + 10}} | ||
| first_layer_temperature = {{settings_extruder_temp|int + 5}} | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 100 | ||
| max_speed_reduction = 90% | ||
| min_fan_speed = 50 | ||
| min_print_speed = 10 | ||
| slowdown_below_layer_time = 15 | ||
| start_filament_gcode = "; Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE={{extra.pressure_advance|default(0)|float}}\nASSERT_ACTIVE_FILAMENT ID={{id}}\n" | ||
| temperature = {{settings_extruder_temp|int}} | ||
| top_fan_speed = -1 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,83 @@ | ||
| # generated by {{sm2s.name}} {{sm2s.version}} on {{sm2s.now}} | ||
| bed_temperature = {{settings_bed_temp|int}} | ||
| bridge_fan_speed = 100 | ||
| bridge_internal_fan_speed = -1 | ||
| chamber_temperature = 15 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "" | ||
| external_perimeter_fan_speed = -1 | ||
| extrusion_multiplier = 0.94 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 100 | ||
| filament_colour = #{{color_hex}} | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cooling_zone_pause = 0 | ||
| filament_cost = {{price}} | ||
| filament_custom_variables = "" | ||
| filament_density = {{density}} | ||
| filament_deretract_speed = nil | ||
| filament_diameter = {{diameter}} | ||
| filament_dip_extraction_speed = 70 | ||
| filament_dip_insertion_speed = 33 | ||
| filament_enable_toolchange_part_fan = 0 | ||
| filament_enable_toolchange_temp = 0 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_overlap = 100% | ||
| filament_max_speed = 0 | ||
| filament_max_volumetric_speed = 13 | ||
| filament_max_wipe_tower_speed = 0 | ||
| filament_melt_zone_pause = 0 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_seam_gap = nil | ||
| filament_settings_id = "{{id}}" | ||
| filament_shrink = 100% | ||
| filament_skinnydip_distance = 31 | ||
| filament_soluble = 0 | ||
| filament_spool_weight = {{spool_weight}} | ||
| filament_toolchange_delay = 0 | ||
| filament_toolchange_part_fan_speed = 50 | ||
| filament_toolchange_temp = 200 | ||
| filament_type = {{material}} | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_use_fast_skinnydip = 0 | ||
| filament_use_skinnydip = 0 | ||
| filament_vendor = "{{vendor.name}}" | ||
| filament_wipe = nil | ||
| filament_wipe_advanced_pigment = 0.5 | ||
| filament_wipe_extra_perimeter = nil | ||
| filament_wipe_only_crossing = nil | ||
| filament_wipe_speed = nil | ||
| first_layer_bed_temperature = {{settings_bed_temp|int + 10}} | ||
| first_layer_temperature = {{settings_extruder_temp|int + 10}} | ||
| full_fan_speed_layer = 4 | ||
| inherits = | ||
| max_fan_speed = 100 | ||
| max_speed_reduction = 90% | ||
| min_fan_speed = 100 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 20 | ||
| start_filament_gcode = "; Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE={{extra.pressure_advance|default(0)|float}}\nASSERT_ACTIVE_FILAMENT ID={{id}}\n" | ||
| temperature = {{settings_extruder_temp|int}} | ||
| top_fan_speed = 100 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,92 @@ | ||
| # generated by {{sm2s.name}} {{sm2s.version}} on {{sm2s.now}} | ||
| bed_temperature = {{settings_bed_temp|int}} | ||
| bridge_fan_speed = -1 | ||
| bridge_internal_fan_speed = -1 | ||
| chamber_temperature = 30 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| default_fan_speed = 50 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| external_perimeter_fan_speed = -1 | ||
| extrusion_multiplier = 1.1 | ||
| fan_below_layer_time = 0 | ||
| filament_colour = #{{color_hex}} | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cooling_zone_pause = 0 | ||
| filament_cost = {{price}} | ||
| filament_custom_variables = "" | ||
| filament_density = {{density}} | ||
| filament_deretract_speed = nil | ||
| filament_diameter = {{diameter}} | ||
| filament_dip_extraction_speed = 70 | ||
| filament_dip_insertion_speed = 33 | ||
| filament_enable_toolchange_part_fan = 0 | ||
| filament_enable_toolchange_temp = 0 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_overlap = 100% | ||
| filament_max_speed = 30 | ||
| filament_max_volumetric_speed = 0 | ||
| filament_max_wipe_tower_speed = 0 | ||
| filament_melt_zone_pause = 0 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_before_travel = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_seam_gap = 1.79769e+308 | ||
| filament_settings_id = "{{id}}" | ||
| filament_shrink = 100% | ||
| filament_skinnydip_distance = 31 | ||
| filament_soluble = 0 | ||
| filament_spool_weight = {{spool_weight}} | ||
| filament_toolchange_delay = 0 | ||
| filament_toolchange_part_fan_speed = 50 | ||
| filament_toolchange_temp = 200 | ||
| filament_type = {{material}} | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_use_fast_skinnydip = 0 | ||
| filament_use_skinnydip = 0 | ||
| filament_vendor = "{{vendor.name}}" | ||
| filament_wipe = nil | ||
| filament_wipe_advanced_pigment = 0.5 | ||
| filament_wipe_extra_perimeter = nil | ||
| filament_wipe_inside_depth = nil | ||
| filament_wipe_inside_end = nil | ||
| filament_wipe_inside_start = nil | ||
| filament_wipe_only_crossing = nil | ||
| filament_wipe_speed = nil | ||
| first_layer_bed_temperature = {{settings_bed_temp|int}} | ||
| first_layer_temperature = {{settings_extruder_temp|int}} | ||
| full_fan_speed_layer = 0 | ||
| gap_fill_fan_speed = -1 | ||
| infill_fan_speed = -1 | ||
| inherits = | ||
| max_fan_speed = 100 | ||
| max_speed_reduction = 90% | ||
| min_print_speed = 10 | ||
| overhangs_fan_speed = -1 | ||
| perimeter_fan_speed = -1 | ||
| slowdown_below_layer_time = 20 | ||
| solid_infill_fan_speed = -1 | ||
| start_filament_gcode = "; Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE={{extra.pressure_advance|default(0)|float}}\nASSERT_ACTIVE_FILAMENT ID={{id}}\n" | ||
| support_material_fan_speed = -1 | ||
| support_material_interface_fan_speed = -1 | ||
| temperature = {{settings_extruder_temp|int}} | ||
| top_fan_speed = -1 |
Oops, something went wrong.