vidja smart lamp

Smart lamp project making use of ikea vidja lamp, Raspberry Pi, ws2812b led strip, and apache web server to control via browser.

Installation

Eventually use this to make an install script. In the meantime, as follows;

Setup ws2812b control
- Run full update and upgrade sudo apt update && sudo apt full-upgrade
- put ssh key in ~/.ssh
- chmod 400 ~/.ssh/id_rsa
- git clone https://github.com/jgarff/rpi_ws281x
- git clone git@github.com:Craio/vidja.git
- sudo apt install scons swig -y
- cd ~/rpi_ws281x
- nano main.c to 240 height x 1 width
- scons
- cd python
- sudo python ./setup.py install
- Test with sudo python ~/vidja/lamp/assets/scripts/Rainbow.py
- Test with sudo python ~/vidja/lamp/assets/scripts/Wipe.py

Setup webserver control
- sudo apt install apache2 php libapache2-mod-php -y
- sudo rm /var/www/html/index.html
- cd ~/vidja
- sudo cp -r * /var/www/html
- sudo visudo /etc/sudoers
- Add www-data ALL=(ALL) NOPASSWD: ALL at the bottom
- cd /var/www/html/lamp/assets/scripts/
- sudo chown www-data:www-data *
- sudo reboot now
- Check ip with ifconfig, point browser to address

Links

I've used bits from all these sources, and many others to make this project, they did the hard work.

• https://learn.adafruit.com/adafruit-neopixel-uberguide/the-magic-of-neopixels
• https://tutorials-raspberrypi.com/connect-control-raspberry-pi-ws2812-rgb-led-strips/
• https://learn.adafruit.com/neopixels-on-raspberry-pi/overview
• https://github.com/jgarff/rpi_ws281x
• https://www.raspberrypi.org/documentation/remote-access/web-server/apache.md

To do

• Add colorpicker
• Write install script
• Rework web control
• Add wiring documentation
• check blackisting audio