Arduino code for using SoftwareSerial to connect Sharp PC-G850V(S) via an Arduino Uno or Nano to a PC.
/*****************************************************************
- Sharp PC-G850V(S) Interface
- By: ChrisHerman
- Date: December 5th, 2021
- Receives files from Sharp G850 and sends to PC via USB-Serial (Nano)
- Requires G850's RTS and CTS lines to be connected witch each other
- and pulled-up to +5V. otherwise SHarp will wait forever.
- See https://youtu.be/HVVmPWCUGlw for details
- Hardware Hookup:
-
- Sharp G850 11 pin port Arduino Nano *=========================================
- GND (pin 3) __________________ GND
- Rx (pin 6) __________________ GPIO9
- Tx (pin 7) __________________ GDIO8
- RTS (pin 4) __________
-
| - CTS (pin 9) __________+
-
| - +5V ---[10K]--+
- This code is released under the MIT License. *****************************************************************/