This repository contains the circuit board layouts I created to use the Powered Up (aka WeDo 2.0) cables and sockets that I found on AliExpress.
I used these connectors, found on a shop at AliExpress, to make my boards.
| Female | Male |
 |  |
The female connector has two locating pins on the bottom that will snap in place into the board. The "neck" on these pins is only approximately 1mm long, so ensure your board is thinner than that if you want the connector to snap into place properly. I used 0.8mm thickness PCB from OSHPark.com and it worked well.
Boards I have designed so far:
| OSHPark Link | Render |
|---|---|
| Powered Up Extender |  |
| Powered Up Extender + 0.1" Pin Headers |  |
| Powered Up Train Motor Splitter |  |
| Powered Up to Power Functions Adapter |  |