Updated Kisslicer config files.

kisslicer/_materials.ini

@@ -12,11 +12,11 @@ bed_C=0
 sec_per_C_per_C=0.00964207
 flow_min_mm3_per_s=0.1
 flow_max_mm3_per_s=20
-destring_suck=5
-destring_prime=5
-destring_min_mm=5
+destring_suck=8
+destring_prime=8
+destring_min_mm=3
 destring_trigger_mm=20
-destring_speed_mm_per_s=50
+destring_speed_mm_per_s=80
 Z_lift_mm=0.2
 min_layer_time_s=15
 wipe_mm=3
@@ -31,18 +31,18 @@ fan_Z_mm=0.5
 fan_loops_percent=100
 fan_inside_percent=0
 fan_cool_percent=100
-temperature_C=220
+temperature_C=230
 keep_warm_C=120
 first_layer_C=240
 bed_C=0
 sec_per_C_per_C=0.00964207
 flow_min_mm3_per_s=0.1
 flow_max_mm3_per_s=20
-destring_suck=6
-destring_prime=6
-destring_min_mm=5
+destring_suck=10
+destring_prime=10
+destring_min_mm=2
 destring_trigger_mm=20
-destring_speed_mm_per_s=15
+destring_speed_mm_per_s=100
 Z_lift_mm=0.2
 min_layer_time_s=15
 wipe_mm=3

kisslicer/_printers.ini

@@ -9,7 +9,7 @@ g_code_cool=3B20446573656C6563742065787472756465722C20636F6F6C696E6720646F776E20
 g_code_N_layers=3B2052652D686F6D65206576657279204E206C6179657273
 g_code_postfix=473238
 every_N_layers=0
-post_process=NULL
+post_process=2F55736572732F6A63726F63686F6C6C2F7372632F6B6F7373656C2F636C65616E5F67636F64652E707920223C46494C453E22
 num_extruders=1
 firmware_type=2
 add_comments=1
@@ -19,9 +19,9 @@ fan_pwm=1
 add_m101_g10=0
 z_speed_mm_per_s=3.5
 z_settle_mm=0
-bed_size_x_mm=170
-bed_size_y_mm=170
-bed_size_z_mm=200
+bed_size_x_mm=200
+bed_size_y_mm=200
+bed_size_z_mm=400
 bed_offset_x_mm=0
 bed_offset_y_mm=0
 bed_offset_z_mm=0
@@ -37,7 +37,7 @@ hi_speed_perim_mm_per_s=30
 hi_speed_solid_mm_per_s=60
 hi_speed_sparse_mm_per_s=75
 ext_gain_1=1
-ext_material_1=1
+ext_material_1=0
 ext_axis_1=0
 ext_gain_2=1
 ext_material_2=0
@@ -55,41 +55,41 @@ solid_loop_overlap_fraction=0.5
 bed_STL_filename=
 extension=gcode
 cost_per_hour=20
-g_code_prefix=4D333032203B20416C6C6F7720636F6C6420657874727573696F6E20746F2061766F696420555342206572726F72730A4D3232302053313030203B2053657420666565646D756C7469706C79206261636B20746F206E6F726D616C202831303025290A4D3130362053313238203B203530252066616E20746F2070726576656E7420686F74656E64206A616D0A473238203B20486F6D6520746F20746F70203320656E6473746F70730A473239205A2D312E30203B204175746F6C6576656C20616E642061646A757374206669727374206C6179657220746869636B6E6573730A4D313037203B205475726E2066616E206F666620666F7220746865206669727374206C617965722E0A
+g_code_prefix=4D333032203B20416C6C6F7720636F6C6420657874727573696F6E20746F2061766F696420555342206572726F72730A4D3232302053313030203B2053657420666565646D756C7469706C79206261636B20746F206E6F726D616C202831303025290A473238203B20486F6D6520746F20746F70203320656E6473746F70730A473239203B204175746F6C6576656C0A4D313037203B205475726E2066616E206F666620666F7220746865206669727374206C617965722E0A
 g_code_warm=3B2053656C6563742065787472756465722C207761726D2C207075726765202835442D7374796C65290A543C4558542B303E0A4D31303420533C54454D503E0A
 g_code_cool=3B20446573656C6563742065787472756465722C20636F6F6C696E6720646F776E202835442D7374796C65290A4D31303420533C54454D503E0A
 g_code_N_layers=NULL
 g_code_postfix=473238203B20486F6D6520746F20746F70203320656E6473746F7073207768656E20646F6E65
 every_N_layers=0
-post_process=NULL
+post_process=2F55736572732F6A63726F63686F6C6C2F7372632F6B6F7373656C2F636C65616E5F67636F64652E707920223C46494C453E22
 num_extruders=1
 firmware_type=2
 add_comments=1
 fan_on=M106
 fan_off=M107
 fan_pwm=1
 add_m101_g10=0
-z_speed_mm_per_s=3.5
+z_speed_mm_per_s=300
 z_settle_mm=0
-bed_size_x_mm=170
-bed_size_y_mm=170
-bed_size_z_mm=200
+bed_size_x_mm=190
+bed_size_y_mm=190
+bed_size_z_mm=250
 bed_offset_x_mm=0
 bed_offset_y_mm=0
 bed_offset_z_mm=0
 bed_roughness_mm=0
-travel_speed_mm_per_s=500
+travel_speed_mm_per_s=300
 first_layer_speed_mm_per_s=25
-dmax_per_layer_mm_per_s=50
-xy_accel_mm_per_s_per_s=1500
+dmax_per_layer_mm_per_s=10
+xy_accel_mm_per_s_per_s=3000
 lo_speed_perim_mm_per_s=10
 lo_speed_solid_mm_per_s=15
 lo_speed_sparse_mm_per_s=30
 hi_speed_perim_mm_per_s=30
 hi_speed_solid_mm_per_s=60
 hi_speed_sparse_mm_per_s=75
 ext_gain_1=1
-ext_material_1=1
+ext_material_1=0
 ext_axis_1=0
 ext_gain_2=1
 ext_material_2=0

kisslicer/_styles.ini

@@ -1,32 +1,32 @@
 
 [Mini Kossel]
-layer_thickness_mm=0.2
+layer_thickness_mm=0.15
 extrusion_width_mm=0.35
-num_loops=3
+num_loops=2
 skin_thickness_mm=0.6
 infill_extrusion_width=0.35
-infill_density_denominator=1
+infill_density_denominator=2
 stacked_layers=1
 use_destring=1
 use_wipe=1
 loops_insideout=1
-infill_st_oct_rnd=1
-inset_surface_xy_mm=0
-seam_jitter_degrees=0
+infill_st_oct_rnd=0
+inset_surface_xy_mm=0.1
+seam_jitter_degrees=360
 seam_depth_scaler=1
 
 [Rostock]
-layer_thickness_mm=0.3
+layer_thickness_mm=0.25
 extrusion_width_mm=0.5
 num_loops=3
-skin_thickness_mm=0.9
+skin_thickness_mm=0.8
 infill_extrusion_width=0.5
 infill_density_denominator=1
 stacked_layers=1
 use_destring=1
 use_wipe=1
-loops_insideout=0
+loops_insideout=1
 infill_st_oct_rnd=0
 inset_surface_xy_mm=0
-seam_jitter_degrees=0
+seam_jitter_degrees=60
 seam_depth_scaler=1

kisslicer/_supports.ini

@@ -3,10 +3,10 @@
 support_sheathe=0
 support_density=0
 support_inflate_mm=0
-support_gap_mm=0.5
-support_angle_deg=45
-support_z_max_mm=-1
+support_gap_mm=2
+support_angle_deg=85
+support_z_max_mm=7.3
 sheathe_z_max_mm=-1
 raft_mode=1
 prime_pillar_mode=0
-raft_inflate_mm=2
+raft_inflate_mm=1