Added tuya pir

src/docs/devices/Tuya-Wifi-Mini-Sensor-PIR-Motion-Alarm/index.md

@@ -0,0 +1,145 @@
+---
+title: Tuya Wifi Mini Sensor PIR Motion Alarm
+date-published: 2025-12-09
+type: Sensor
+standard: global
+board: bk72xx
+made-for-esphome: false
+difficulty: 2
+---
+
+![Tuya Wifi Mini Sensor PIR Motion Alarm](tuya-pir-motion-alarm.jpg "Tuya Wifi Mini Sensor PIR Motion Alarm")
+
+This is a PIR Motion device with an LED and a passive buzzer. It is simple and built with a CBU chip.
+
+## Setup
+
+It is not vulnerable to tuya-cloudcutter so you need to solder to the chip and serial flash it. This requires
+disassembly, soldering, a USB-to-Serial-TTL, and a tool like [ltchiptool](https://github.com/libretiny-eu/ltchiptool)
+or [BK7231 GUI Flash Tool](https://github.com/openshwprojects/BK7231GUIFlashTool).
+The PIN-out is available [here](https://docs.libretiny.eu/boards/cbu/#usage).
+
+## YAML configuration
+
+```yaml
+esphome:
+  name: tuya-pir-alarm
+  friendly_name: tuya-pir-alarm
+
+bk72xx:
+  board: cbu
+
+logger:
+
+web_server:
+
+ota:
+  password: "CHANGE-THIS-PASSWORD-OR-REMOVE-OTA"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+captive_portal:
+
+api:
+  encryption:
+    key: "GET-A-KEY-HERE-https://esphome.io/components/api.html#configuration-variables"
+  services:
+    - service: pir_notification
+      then:
+        - output.libretiny_pwm.set_frequency:
+            id: buzzer
+            frequency: 800
+        - output.set_level:
+            id: buzzer
+            level: 50%
+        - delay: 120ms
+        - output.turn_off: buzzer
+        - delay: 200ms
+        - output.libretiny_pwm.set_frequency:
+            id: buzzer
+            frequency: 1000
+        - output.set_level:
+            id: buzzer
+            level: 50%
+        - delay: 120ms
+        - output.turn_off: buzzer
+    - service: pir_alarm
+      then:
+        - repeat:
+            count: 8
+            then:
+              - output.libretiny_pwm.set_frequency:
+                  id: buzzer
+                  frequency: 5200
+              - output.set_level:
+                  id: buzzer
+                  level: 90%
+              - delay: 200ms
+
+              - output.libretiny_pwm.set_frequency:
+                  id: buzzer
+                  frequency: 2200
+              - output.set_level:
+                  id: buzzer
+                  level: 90%
+              - delay: 200ms
+
+        - output.turn_off: buzzer
+
+binary_sensor:
+  - platform: gpio
+    pin: P22
+    name: "PIR Motion Sensor P22"
+    device_class: motion
+
+  - platform: gpio
+    id: pir_button
+    pin:
+      number: P16
+      mode: INPUT_PULLUP
+      inverted: true
+    on_state:
+      then:
+        - if:
+            condition:
+              binary_sensor.is_on: pir_button
+            then:
+              - output.turn_off: buzzer
+            else:
+              - output.turn_on: buzzer
+    name: "PIR Button P16"
+    device_class: light
+
+light:
+  - platform: binary
+    name: "Delete PIR Alarm Output P6"
+    output: buzzer
+
+  - platform: binary
+    name: "PIR Button Enabler P14"
+    output: output_p14
+
+  - platform: binary
+    name: "PIR Internal LED P20"
+    output: internal_led
+
+output:
+  - platform: libretiny_pwm
+    pin: P6
+    frequency: 1000 Hz
+    id: buzzer
+
+  - id: internal_led
+    platform: gpio
+    pin:
+      number: P20
+      inverted: true
+
+  - id: output_p14
+    platform: gpio
+    pin:
+      number: P14
+      inverted: true
+```