Run some Windows environment variable tests only on Windows #1774

EliahKagan · 2023-12-19T01:43:59Z

These are a couple changes to simplify and clarify the tests in test_util.py.

Use Path.touch instead of Path.write_bytes(b"") in the tests. I guess I had formerly had the idea that pathlib gained Path.touch recently, but that is not at all the case. (This applies to all operating systems, but it is the more minor of the two changes.)
Run some tests of Windows-specific environment variables on Windows only, and simplify the tests accordingly. The reason I think this makes sense now, even though it wouldn't have been the best idea when those tests were first introduced, is detailed in the 6a8ed70 message.

The latter is one of the changes listed in the "What is not done here?" section of #1745. Or it is part of that--perhaps some of the other tests, more directly concerning rmtree, can also be simplified, I'm not sure. (Right now I'm thinking that will become clearer if it is considered together with further progress toward #790 rather than beforehand.)

It's not necessary to use `write_bytes(b"")`, because pathlib.Path has `touch()`.

This skips the tests of how the HIDE_WINDOWS_KNOWN_ERRORS and HIDE_WINDOWS_FREEZE_ERRORS environment variables affect the same-named attributes of git.util, except when testing on Windows. These are parsed only to ever set a True value on Windows, but checking that this is the case is less important ever since git.util.rmtree was changed to not check HIDE_WINDOWS_KNOWN_ERRORS on other systems (and this is covered in other tests). Setting the variables to True on non-Windows systems would still have a bad effect on the tests themselves, some of which use them as skip or xfail conditions separate from the skipping logic in git.util.rmtree. However, this is effectively using them as part of the test suite (which they were initially meant for and which they may eventually go back to being, for gitpython-developers#790), where they would not ordinarily have tests. The benefit and motivation for running these tests only on Windows is that the tests can be simplified, so that their parameter sets are no longer confusing. That change is also made here.

Byron

Thank you! Definitely an improvement!

I also wonder why touch() wasn't used before, and don't really have an explanation for it 😁.

EliahKagan · 2023-12-19T14:07:17Z

Well, the code that should've used it but didn't was also code written by me, For whatever reason, I had not thought to use it, or had not thought I could use it. I think I had gotten the wrong idea that it wasn't supported on all versions (it is, though).

Byron · 2023-12-19T14:23:59Z

Oh, how embarrassing 🤦‍♂️, I actually thought this lack of touch was still in the pre-Eliah codebase 😅. Despite reading your comment about it in the PR text, I thought that was the reason you didn't change it yet, even though you were the original creator. I definitely didn't mean to question you, but rather, my probably 15 years younger self 😁.

Bump gitpython from 3.1.37 to 3.1.41 Bumps gitpython from 3.1.37 to 3.1.41. Release notes Sourced from gitpython's releases. 3.1.41 - fix Windows security issue The details about the Windows security issue can be found in this advisory. Special thanks go to @EliahKagan who reported the issue and fixed it in a single stroke, while being responsible for an incredible amount of improvements that he contributed over the last couple of months ❤️. What's Changed Add __all__ in git.exc by @EliahKagan in gitpython-developers/GitPython#1719 Set submodule update cadence to weekly by @EliahKagan in gitpython-developers/GitPython#1721 Never modify sys.path by @EliahKagan in gitpython-developers/GitPython#1720 Bump git/ext/gitdb from 8ec2390 to ec58b7e by @dependabot in gitpython-developers/GitPython#1722 Revise comments, docstrings, some messages, and a bit of code by @EliahKagan in gitpython-developers/GitPython#1725 Use zero-argument super() by @EliahKagan in gitpython-developers/GitPython#1726 Remove obsolete note in _iter_packed_refs by @EliahKagan in gitpython-developers/GitPython#1727 Reorganize test_util and make xfail marks precise by @EliahKagan in gitpython-developers/GitPython#1729 Clarify license and make module top comments more consistent by @EliahKagan in gitpython-developers/GitPython#1730 Deprecate compat.is_, rewriting all uses by @EliahKagan in gitpython-developers/GitPython#1732 Revise and restore some module docstrings by @EliahKagan in gitpython-developers/GitPython#1735 Make the rmtree callback Windows-only by @EliahKagan in gitpython-developers/GitPython#1739 List all non-passing tests in test summaries by @EliahKagan in gitpython-developers/GitPython#1740 Document some minor subtleties in test_util.py by @EliahKagan in gitpython-developers/GitPython#1749 Always read metadata files as UTF-8 in setup.py by @EliahKagan in gitpython-developers/GitPython#1748 Test native Windows on CI by @EliahKagan in gitpython-developers/GitPython#1745 Test macOS on CI by @EliahKagan in gitpython-developers/GitPython#1752 Let close_fds be True on all platforms by @EliahKagan in gitpython-developers/GitPython#1753 Fix IndexFile.from_tree on Windows by @EliahKagan in gitpython-developers/GitPython#1751 Remove unused TASKKILL fallback in AutoInterrupt by @EliahKagan in gitpython-developers/GitPython#1754 Don't return with operand when conceptually void by @EliahKagan in gitpython-developers/GitPython#1755 Group .gitignore entries by purpose by @EliahKagan in gitpython-developers/GitPython#1758 Adding dubious ownership handling by @marioaag in gitpython-developers/GitPython#1746 Avoid brittle assumptions about preexisting temporary files in tests by @EliahKagan in gitpython-developers/GitPython#1759 Overhaul noqa directives by @EliahKagan in gitpython-developers/GitPython#1760 Clarify some Git.execute kill_after_timeout limitations by @EliahKagan in gitpython-developers/GitPython#1761 Bump actions/setup-python from 4 to 5 by @dependabot in gitpython-developers/GitPython#1763 Don't install black on Cygwin by @EliahKagan in gitpython-developers/GitPython#1766 Extract all "import gc" to module level by @EliahKagan in gitpython-developers/GitPython#1765 Extract remaining local "import gc" to module level by @EliahKagan in gitpython-developers/GitPython#1768 Replace xfail with gc.collect in TestSubmodule.test_rename by @EliahKagan in gitpython-developers/GitPython#1767 Enable CodeQL by @EliahKagan in gitpython-developers/GitPython#1769 Replace some uses of the deprecated mktemp function by @EliahKagan in gitpython-developers/GitPython#1770 Bump github/codeql-action from 2 to 3 by @dependabot in gitpython-developers/GitPython#1773 Run some Windows environment variable tests only on Windows by @EliahKagan in gitpython-developers/GitPython#1774 Fix TemporaryFileSwap regression where file_path could not be Path by @EliahKagan in gitpython-developers/GitPython#1776 Improve hooks tests by @EliahKagan in gitpython-developers/GitPython#1777 Fix if items of Index is of type PathLike by @stegm in gitpython-developers/GitPython#1778 Better document IterableObj.iter_items and improve some subclasses by @EliahKagan in gitpython-developers/GitPython#1780 Revert "Don't install black on Cygwin" by @EliahKagan in gitpython-developers/GitPython#1783 Add missing pip in $PATH on Cygwin CI by @EliahKagan in gitpython-developers/GitPython#1784 Shorten Iterable docstrings and put IterableObj first by @EliahKagan in gitpython-developers/GitPython#1785 Fix incompletely revised Iterable/IterableObj docstrings by @EliahKagan in gitpython-developers/GitPython#1786 Pre-deprecate setting Git.USE_SHELL by @EliahKagan in gitpython-developers/GitPython#1782 ... (truncated) Commits f288738 bump patch level ef3192c Merge pull request #1792 from EliahKagan/popen 1f3caa3 Further clarify comment in test_hook_uses_shell_not_from_cwd 3eb7c2a Move safer_popen from git.util to git.cmd c551e91 Extract shared logic for using Popen safely on Windows 15ebb25 Clarify comment in test_hook_uses_shell_not_from_cwd f44524a Avoid spurious "location may have moved" on Windows a42ea0a Cover absent/no-distro bash.exe in hooks "not from cwd" test 7751436 Extract venv management from test_installation 66ff4c1 Omit CWD in search for bash.exe to run hooks on Windows Additional commits viewable in compare view You can trigger a rebase of this PR by commenting @dependabot rebase. Dependabot commands and options You can trigger Dependabot actions by commenting on this PR: @dependabot rebase will rebase this PR @dependabot recreate will recreate this PR, overwriting any edits that have been made to it @dependabot merge will merge this PR after your CI passes on it @dependabot squash and merge will squash and merge this PR after your CI passes on it @dependabot cancel merge will cancel a previously requested merge and block automerging @dependabot reopen will reopen this PR if it is closed @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the Security Alerts page. Note Automatic rebases have been disabled on this pull request as it has been open for over 30 days. Reviewed-by: Vladimir Vshivkov

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [GitPython](https://togithub.com/gitpython-developers/GitPython) | `==3.1.40` -> `==3.1.41` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/GitPython/3.1.41?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/GitPython/3.1.41?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/GitPython/3.1.40/3.1.41?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/GitPython/3.1.40/3.1.41?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- > [!WARNING] > Some dependencies could not be looked up. Check the Dependency Dashboard for more information. ### GitHub Vulnerability Alerts #### [CVE-2024-22190](https://togithub.com/gitpython-developers/GitPython/security/advisories/GHSA-2mqj-m65w-jghx) ### Summary This issue exists because of an incomplete fix for CVE-2023-40590. On Windows, GitPython uses an untrusted search path if it uses a shell to run `git`, as well as when it runs `bash.exe` to interpret hooks. If either of those features are used on Windows, a malicious `git.exe` or `bash.exe` may be run from an untrusted repository. ### Details Although GitPython often avoids executing programs found in an untrusted search path since 3.1.33, two situations remain where this still occurs. Either can allow arbitrary code execution under some circumstances. #### When a shell is used GitPython can be told to run `git` commands through a shell rather than as direct subprocesses, by passing `shell=True` to any method that accepts it, or by both setting `Git.USE_SHELL = True` and not passing `shell=False`. Then the Windows `cmd.exe` shell process performs the path search, and GitPython does not prevent that shell from finding and running `git` in the current directory. When GitPython runs `git` directly rather than through a shell, the GitPython process performs the path search, and currently omits the current directory by setting `NoDefaultCurrentDirectoryInExePath` in its own environment during the `Popen` call. Although the `cmd.exe` shell will honor this environment variable when present, GitPython does not currently pass it into the shell subprocess's environment. Furthermore, because GitPython sets the subprocess CWD to the root of a repository's working tree, using a shell will run a malicious `git.exe` in an untrusted repository even if GitPython itself is run from a trusted location. This also applies if `Git.execute` is called directly with `shell=True` (or after `Git.USE_SHELL = True`) to run any command. #### When hook scripts are run On Windows, GitPython uses `bash.exe` to run hooks that appear to be scripts. However, unlike when running `git`, no steps are taken to avoid finding and running `bash.exe` in the current directory. This allows the author of an untrusted fork or branch to cause a malicious `bash.exe` to be run in some otherwise safe workflows. An example of such a scenario is if the user installs a trusted hook while on a trusted branch, then switches to an untrusted feature branch (possibly from a fork) to review proposed changes. If the untrusted feature branch contains a malicious `bash.exe` and the user's current working directory is the working tree, and the user performs an action that runs the hook, then although the hook itself is uncorrupted, it runs with the malicious `bash.exe`. Note that, while `bash.exe` is a shell, this is a separate scenario from when `git` is run using the unrelated Windows `cmd.exe` shell. ### PoC On Windows, create a `git.exe` file in a repository. Then create a `Repo` object, and call any method through it (directly or indirectly) that supports the `shell` keyword argument with `shell=True`: ```powershell mkdir testrepo git init testrepo cp ... testrepo git.exe # Replace "..." with any executable of choice. python -c "import git; print(git.Repo('testrepo').git.version(shell=True))" ``` The `git.exe` executable in the repository directory will be run. Or use no `Repo` object, but do it from the location with the `git.exe`: ```powershell cd testrepo python -c "import git; print(git.Git().version(shell=True))" ``` The `git.exe` executable in the current directory will be run. For the scenario with hooks, install a hook in a repository, create a `bash.exe` file in the current directory, and perform an operation that causes GitPython to attempt to run the hook: ```powershell mkdir testrepo cd testrepo git init mv .git/hooks/pre-commit.sample .git/hooks/pre-commit cp ... bash.exe # Replace "..." with any executable of choice. echo "Some text" >file.txt git add file.txt python -c "import git; git.Repo().index.commit('Some message')" ``` The `bash.exe` executable in the current directory will be run. ### Impact The greatest impact is probably in applications that set `Git.USE_SHELL = True` for historical reasons. (Undesired console windows had, in the past, been created in some kinds of applications, when it was not used.) Such an application may be vulnerable to arbitrary code execution from a malicious repository, even with no other exacerbating conditions. This is to say that, if a shell is used to run `git`, the full effect of CVE-2023-40590 is still present. Furthermore, as noted above, running the application itself from a trusted directory is not a sufficient mitigation. An application that does not direct GitPython to use a shell to run `git` subprocesses thus avoids most of the risk. However, there is no such straightforward way to prevent GitPython from running `bash.exe` to interpret hooks. So while the conditions needed for that to be exploited are more involved, it may be harder to mitigate decisively prior to patching. ### Possible solutions A straightforward approach would be to address each bug directly: - When a shell is used, pass `NoDefaultCurrentDirectoryInExePath` into the subprocess environment, because in that scenario the subprocess is the `cmd.exe` shell that itself performs the path search. - Set `NoDefaultCurrentDirectoryInExePath` in the GitPython process environment during the `Popen` call made to run hooks with a `bash.exe` subprocess. These need only be done on Windows. --- ### Release Notes <details> <summary>gitpython-developers/GitPython (GitPython)</summary> ### [`v3.1.41`](https://togithub.com/gitpython-developers/GitPython/releases/tag/3.1.41): - fix Windows security issue [Compare Source](https://togithub.com/gitpython-developers/GitPython/compare/3.1.40...3.1.41) The details about the Windows security issue [can be found in this advisory](https://togithub.com/gitpython-developers/GitPython/security/advisories/GHSA-2mqj-m65w-jghx). Special thanks go to [@EliahKagan](https://togithub.com/EliahKagan) who reported the issue and fixed it in a single stroke, while being responsible for an incredible amount of improvements that he contributed over the last couple of months ❤️. #### What's Changed - Add `__all__` in git.exc by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1719](https://togithub.com/gitpython-developers/GitPython/pull/1719) - Set submodule update cadence to weekly by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1721](https://togithub.com/gitpython-developers/GitPython/pull/1721) - Never modify sys.path by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1720](https://togithub.com/gitpython-developers/GitPython/pull/1720) - Bump git/ext/gitdb from `8ec2390` to `ec58b7e` by [@dependabot](https://togithub.com/dependabot) in [https://github.com/gitpython-developers/GitPython/pull/1722](https://togithub.com/gitpython-developers/GitPython/pull/1722) - Revise comments, docstrings, some messages, and a bit of code by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1725](https://togithub.com/gitpython-developers/GitPython/pull/1725) - Use zero-argument super() by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1726](https://togithub.com/gitpython-developers/GitPython/pull/1726) - Remove obsolete note in \_iter_packed_refs by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1727](https://togithub.com/gitpython-developers/GitPython/pull/1727) - Reorganize test_util and make xfail marks precise by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1729](https://togithub.com/gitpython-developers/GitPython/pull/1729) - Clarify license and make module top comments more consistent by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1730](https://togithub.com/gitpython-developers/GitPython/pull/1730) - Deprecate compat.is\_<platform>, rewriting all uses by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1732](https://togithub.com/gitpython-developers/GitPython/pull/1732) - Revise and restore some module docstrings by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1735](https://togithub.com/gitpython-developers/GitPython/pull/1735) - Make the rmtree callback Windows-only by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1739](https://togithub.com/gitpython-developers/GitPython/pull/1739) - List all non-passing tests in test summaries by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1740](https://togithub.com/gitpython-developers/GitPython/pull/1740) - Document some minor subtleties in test_util.py by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1749](https://togithub.com/gitpython-developers/GitPython/pull/1749) - Always read metadata files as UTF-8 in setup.py by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1748](https://togithub.com/gitpython-developers/GitPython/pull/1748) - Test native Windows on CI by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1745](https://togithub.com/gitpython-developers/GitPython/pull/1745) - Test macOS on CI by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1752](https://togithub.com/gitpython-developers/GitPython/pull/1752) - Let close_fds be True on all platforms by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1753](https://togithub.com/gitpython-developers/GitPython/pull/1753) - Fix IndexFile.from_tree on Windows by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1751](https://togithub.com/gitpython-developers/GitPython/pull/1751) - Remove unused TASKKILL fallback in AutoInterrupt by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1754](https://togithub.com/gitpython-developers/GitPython/pull/1754) - Don't return with operand when conceptually void by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1755](https://togithub.com/gitpython-developers/GitPython/pull/1755) - Group .gitignore entries by purpose by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1758](https://togithub.com/gitpython-developers/GitPython/pull/1758) - Adding dubious ownership handling by [@marioaag](https://togithub.com/marioaag) in [https://github.com/gitpython-developers/GitPython/pull/1746](https://togithub.com/gitpython-developers/GitPython/pull/1746) - Avoid brittle assumptions about preexisting temporary files in tests by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1759](https://togithub.com/gitpython-developers/GitPython/pull/1759) - Overhaul noqa directives by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1760](https://togithub.com/gitpython-developers/GitPython/pull/1760) - Clarify some Git.execute kill_after_timeout limitations by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1761](https://togithub.com/gitpython-developers/GitPython/pull/1761) - Bump actions/setup-python from 4 to 5 by [@dependabot](https://togithub.com/dependabot) in [https://github.com/gitpython-developers/GitPython/pull/1763](https://togithub.com/gitpython-developers/GitPython/pull/1763) - Don't install black on Cygwin by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1766](https://togithub.com/gitpython-developers/GitPython/pull/1766) - Extract all "import gc" to module level by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1765](https://togithub.com/gitpython-developers/GitPython/pull/1765) - Extract remaining local "import gc" to module level by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1768](https://togithub.com/gitpython-developers/GitPython/pull/1768) - Replace xfail with gc.collect in TestSubmodule.test_rename by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1767](https://togithub.com/gitpython-developers/GitPython/pull/1767) - Enable CodeQL by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1769](https://togithub.com/gitpython-developers/GitPython/pull/1769) - Replace some uses of the deprecated mktemp function by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1770](https://togithub.com/gitpython-developers/GitPython/pull/1770) - Bump github/codeql-action from 2 to 3 by [@dependabot](https://togithub.com/dependabot) in [https://github.com/gitpython-developers/GitPython/pull/1773](https://togithub.com/gitpython-developers/GitPython/pull/1773) - Run some Windows environment variable tests only on Windows by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1774](https://togithub.com/gitpython-developers/GitPython/pull/1774) - Fix TemporaryFileSwap regression where file_path could not be Path by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1776](https://togithub.com/gitpython-developers/GitPython/pull/1776) - Improve hooks tests by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1777](https://togithub.com/gitpython-developers/GitPython/pull/1777) - Fix if items of Index is of type PathLike by [@stegm](https://togithub.com/stegm) in [https://github.com/gitpython-developers/GitPython/pull/1778](https://togithub.com/gitpython-developers/GitPython/pull/1778) - Better document IterableObj.iter_items and improve some subclasses by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1780](https://togithub.com/gitpython-developers/GitPython/pull/1780) - Revert "Don't install black on Cygwin" by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1783](https://togithub.com/gitpython-developers/GitPython/pull/1783) - Add missing pip in $PATH on Cygwin CI by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1784](https://togithub.com/gitpython-developers/GitPython/pull/1784) - Shorten Iterable docstrings and put IterableObj first by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1785](https://togithub.com/gitpython-developers/GitPython/pull/1785) - Fix incompletely revised Iterable/IterableObj docstrings by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1786](https://togithub.com/gitpython-developers/GitPython/pull/1786) - Pre-deprecate setting Git.USE_SHELL by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1782](https://togithub.com/gitpython-developers/GitPython/pull/1782) - Deprecate Git.USE_SHELL by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1787](https://togithub.com/gitpython-developers/GitPython/pull/1787) - In handle_process_output don't forward finalizer result by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1788](https://togithub.com/gitpython-developers/GitPython/pull/1788) - Fix mypy warning "Missing return statement" by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1789](https://togithub.com/gitpython-developers/GitPython/pull/1789) - Fix two remaining Windows untrusted search path cases by [@EliahKagan](https://togithub.com/EliahKagan) in [https://github.com/gitpython-developers/GitPython/pull/1792](https://togithub.com/gitpython-developers/GitPython/pull/1792) #### New Contributors - [@marioaag](https://togithub.com/marioaag) made their first contribution in [https://github.com/gitpython-developers/GitPython/pull/1746](https://togithub.com/gitpython-developers/GitPython/pull/1746) - [@stegm](https://togithub.com/stegm) made their first contribution in [https://github.com/gitpython-developers/GitPython/pull/1778](https://togithub.com/gitpython-developers/GitPython/pull/1778) **Full Changelog**: gitpython-developers/GitPython@3.1.40...3.1.41 </details> --- ### Configuration 📅 **Schedule**: Branch creation - "" (UTC), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/googleapis/sdk-platform-java).

EliahKagan added 2 commits December 18, 2023 19:51

Use Path.touch to create files for rmtree tests

b12a54a

It's not necessary to use `write_bytes(b"")`, because pathlib.Path has `touch()`.

EliahKagan force-pushed the simplify-test-util branch from 6a8ed70 to b12a54a Compare December 19, 2023 01:47

EliahKagan marked this pull request as ready for review December 19, 2023 01:48

Byron reviewed Dec 19, 2023

View reviewed changes

Byron merged commit 4023f28 into gitpython-developers:main Dec 19, 2023
43 checks passed

EliahKagan deleted the simplify-test-util branch December 19, 2023 14:07

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Run some Windows environment variable tests only on Windows #1774

Run some Windows environment variable tests only on Windows #1774

EliahKagan commented Dec 19, 2023 •

edited

Loading

Byron left a comment

EliahKagan commented Dec 19, 2023

Byron commented Dec 19, 2023

Run some Windows environment variable tests only on Windows #1774

Run some Windows environment variable tests only on Windows #1774

Conversation

EliahKagan commented Dec 19, 2023 • edited Loading

Byron left a comment

Choose a reason for hiding this comment

EliahKagan commented Dec 19, 2023

Byron commented Dec 19, 2023

EliahKagan commented Dec 19, 2023 •

edited

Loading