hashicorp · jmurret · Oct 28, 2024 · Oct 18, 2024
@@ -268,6 +268,8 @@ Note that the Kubernetes example does not include a `partition` field. Configura
 
 Enable options under `HTTP.Incoming.RequestNormalization` to apply normalization to all inbound traffic to mesh proxies.
 
+~> **Compatibility warning**: This feature is available as of Consul CE 1.20.1 and Consul Enterprise 1.20.1, 1.19.2, 1.18.3, and 1.15.15. We recommend upgrading to the latest version of Consul to take advantage of the latest features and improvements.
+
 <CodeTabs tabs={[ "HCL", "Kubernetes YAML", "JSON" ]}>
 
 ```hcl

@@ -48,7 +48,9 @@ The following outline shows how to format the service intentions configuration e
         - [`Exact`](#sources-permissions-http-header): string
         - [`Prefix`](#sources-permissions-http-header): string
         - [`Suffix`](#sources-permissions-http-header): string
-        - [`Regex`](#sources-permissions-http-header): string
+        - [`Contains`](#spec-sources-permissions-http-header): string
+        - [`Regex`](#spec-sources-permissions-http-header): string
+        - [`IgnoreCase`](#spec-sources-permissions-http-header): boolean | `false`
         - [`Invert`](#sources-permissions-http-header): boolean | `false`
   - [`Precedence`](#sources-precedence): number
   - [`Type`](#sources-type): string | `consul`
@@ -648,7 +650,9 @@ Each member of the `Header` list is a map that contains a `Name` field and at le
 | `Exact` | Specifies a value for the header key set in the `Name` field. If the request header value matches the `Exact` value, Consul applies the permission.  Do not specify `Exact` if `Present`, `Prefix`, `Suffix`, or `Regex` are configured in the same `Header` configuration. | string | optional |
 | `Prefix` | Specifies a prefix value for the header key set in the `Name` field. If the request header value starts with the `Prefix` value, Consul applies the permission.  Do not specify `Prefix` if `Present`, `Exact`, `Suffix`, or `Regex` are configured in the same `Header` configuration. | string | optional |
 | `Suffix` | Specifies a suffix value for the header key set in the `Name` field. If the request header value ends with the `Suffix` value, Consul applies the permission.  Do not specify `Suffix` if `Present`, `Exact`, `Prefix`, or `Regex` are configured in the same `Header` configuration. | string | optional |
-| `Regex` | Specifies a regular expression pattern as the value for the header key set in the `Name` field. If the request header value matches the regex, Consul applies the permission. Do not specify `Regex` if `Present`, `Exact`, `Prefix`, or `Suffix` are configured in the same `Header` configuration. The regex syntax is proxy-specific. If using Envoy, refer to the [re2 documentation](https://github.com/google/re2/wiki/Syntax) for details. | string | optional |
+| `Contains` | Specifies a contains value for the header key set in the `Name` field. If the request header value includes the `Contains` value, Consul applies the permission.  Do not specify `Contains` if `Present`, `Exact`, `Prefix`, `Suffix`, or `Regex` are configured in the same `header` configuration. | string | optional |
+| `Regex` | Specifies a regular expression pattern as the value for the header key set in the `Name` field. If the request header value matches the regex, Consul applies the permission. Do not specify `Regex` if `Present`, `Exact`, `Prefix`, `Suffix`, or `Contains` are configured in the same `Header` configuration. The regex syntax is proxy-specific. If using Envoy, refer to the [re2 documentation](https://github.com/google/re2/wiki/Syntax) for details. | string | optional |
+| `IgnoreCase` | Ignores the case of the provided header value when matching with `Exact`, `Prefix`, `Suffix`, or `Contains`. Default is `false`. | boolean | optional |
 | `Invert` | Inverts the matching logic configured in the `Header`. Default is `false`. | boolean | optional |
 
 ### `Sources[].Precedence`
@@ -964,7 +968,7 @@ Specifies a set of criteria for matching HTTP request headers. The request heade
 
 Each member of the `header` list is a map that contains a `name` field and at least one match criterion.
 
-~> **Warning**: If it is possible for a header to contain multiple values, we recommend using `contains` or `regex` rather than `exact`, `prefix`, or `suffix`. Envoy internally concatenates multiple header values into a single CSV value prior to applying match rules, which may result in match rules that depend on the beginning or end of a string vulnerable to circumvention. A more robust alternative is using `contains` or, if a stricter value match is required, configuring a regex pattern that is tolerant of comma-separated values.
+~> **Warning**: If it is possible for a header to contain multiple values, we recommend using `contains` or `regex` rather than `exact`, `prefix`, or `suffix`. Envoy internally concatenates multiple header values into a single CSV value prior to applying match rules, which may result in match rules that depend on the beginning or end of a string vulnerable to circumvention. A more robust alternative is using `contains` or, if a stricter value match is required, configuring a regex pattern that is tolerant of comma-separated values. These options are available as of Consul CE 1.20.1 and Consul Enterprise 1.20.1, 1.19.2, 1.18.3, and 1.15.15.
 
 The following table describes the parameters that each member of the `header` list may contain:
 

@@ -42,6 +42,8 @@ an explicit intention.
 
 ### Request Normalization Configured for L7 Intentions
 
+~> **Compatibility warning**: This feature is available as of Consul CE 1.20.1 and Consul Enterprise 1.20.1, 1.19.2, 1.18.3, and 1.15.15. We recommend upgrading to the latest version of Consul to take advantage of the latest features and improvements.
+
 Atypical traffic patterns may interfere with the enforcement of L7 intentions. For
 example, if a service makes request to a non-normalized URI path and Consul is not
 configured to force path normalization, it becomes possible to circumvent path match rules. While a

@@ -14,6 +14,12 @@ provided for their upgrades as a result of new features or changed behavior.
 This page is used to document those details separately from the standard
 upgrade flow.
 
+## Consul 1.20.x
+
+### Mesh traffic request path normalization enabled by default
+
+As of Consul v1.20.1, inbound traffic to mesh proxies will have Envoy request [path normalization](https://www.envoyproxy.io/docs/envoy/latest/api-v3/extensions/filters/network/http_connection_manager/v3/http_connection_manager.proto#envoy-v3-api-field-extensions-filters-network-http-connection-manager-v3-httpconnectionmanager-normalize-path) applied by default. This should not interfere with the majority of service traffic, but can be disabled if needed by setting `http.incoming.request_normalization.insecure_disable_path_normalization` to `true` in the [global `mesh` configuration entry](/consul/docs/connect/config-entries/mesh#request-normalization). This setting is generally safe to change if not using L7 intentions with path matching.
+
 ## Consul v1.19.x
 
 ### Health endpoint status filtering is now processed on the server side when using client agents
@@ -74,10 +80,6 @@ service-defaults are configured in each partition and namespace before upgrading
 #### ACL tokens with templated policies
 [ACL templated policies](/consul/docs/security/acl#templated-policies) were added to 1.17.0 to simplify obtaining the right permissions for ACL tokens. When performing a [rolling upgrade](/consul/tutorials/datacenter-operations/upgrade-federated-environment#server-rolling-upgrade) and a version of Consul prior to 1.17.x is presented with a token created Consul v1.17.x or newer that contains templated policies, the templated policies field is not recognized. As a result, the token might not have the expected permissions on the older version of Consul.
 
-### Mesh traffic request path normalization enabled by default
-
-As of Consul v1.17.8, inbound traffic to mesh proxies will have Envoy request [path normalization](https://www.envoyproxy.io/docs/envoy/latest/api-v3/extensions/filters/network/http_connection_manager/v3/http_connection_manager.proto#envoy-v3-api-field-extensions-filters-network-http-connection-manager-v3-httpconnectionmanager-normalize-path) applied by default. This should not interfere with the majority of service traffic, but can be disabled if needed by setting `http.incoming.request_normalization.insecure_disable_path_normalization` to `true` in the [global `mesh` configuration entry](/consul/docs/connect/config-entries/mesh#request-normalization). This setting is generally safe to change if not using L7 intentions with path matching.
-
 ## Consul 1.16.x
 
 ### Known issues