Network_type_reachability

This library is based on and inspired by the library "flutter_reachability"

This library uses the following dependencies

permission_handler: 9.2.0
dart_ping:
dart_ping_ios:

Next, the necessary configurations for the correct operation of "Network_type_reachability" will be shown, but it is recommended to take a look at the original packages.

---

Permission_handler settings

Android

Upgrade pre 1.12 Android projects

Since version 4.4.0 this plugin is implemented using the Flutter 1.12 Android plugin APIs. Unfortunately this means App developers also need to migrate their Apps to support the new Android infrastructure. You can do so by following the Upgrading pre 1.12 Android projects migration guide. Failing to do so might result in unexpected behaviour. Most common known error is the permission_handler not returning after calling the .request() method on a permission.

AndroidX

As of version 3.1.0 the permission_handler plugin switched to the AndroidX version of the Android Support Libraries. This means you need to make sure your Android project is also upgraded to support AndroidX. Detailed instructions can be found here.

The TL;DR version is:

1. Add the following to your "gradle.properties" file:

   android.useAndroidX=true android.enableJetifier=true

copied to clipboard

1. Make sure you set the compileSdkVersion in your "android/app/build.gradle" file to 31:

   android { compileSdkVersion 31 ... }

copied to clipboard

1. Make sure you replace all the android. dependencies to their AndroidX counterparts (a full list can be found here).

Add permissions to your AndroidManifest.xml file. There's a debug, main and profile version which are chosen depending on how you start your app. In general, it's sufficient to add permission only to the main version. Here's an example AndroidManifest.xml with a complete list of all possible permissions.

Ios

Add permission to your Info.plist file. Here's an example Info.plist with a complete list of all possible permissions.

IMPORTANT: You will have to include all permission options when you want to submit your App. This is because the permission_handler plugin touches all different SDKs and because the static code analyser (run by Apple upon App submission) detects this and will assert if it cannot find a matching permission option in the Info.plist. More information about this can be found here.

The permission_handler plugin use macros to control whether a permission is enabled.

You must list permission you want to use in your application :

1. Add the following to your Podfile file:

   post_install do |installer|
     installer.pods_project.targets.each do |target|
       target.build_configurations.each do |config|
         ... # Here are some configurations automatically generated by flutter
   
         # You can enable the permissions needed here. For example to enable camera
         # permission, just remove the `#` character in front so it looks like this:
         #
         # ## dart: PermissionGroup.camera
         # 'PERMISSION_CAMERA=1'
         #
         #  Preprocessor definitions can be found in: https://github.com/Baseflow/flutter-permission-handler/blob/master/permission_handler/ios/Classes/PermissionHandlerEnums.h
         config.build_settings['GCC_PREPROCESSOR_DEFINITIONS'] ||= [
           '$(inherited)',
   
           ## dart: PermissionGroup.calendar
           # 'PERMISSION_EVENTS=1',
   
           ## dart: PermissionGroup.reminders
           # 'PERMISSION_REMINDERS=1',
   
           ## dart: PermissionGroup.contacts
           # 'PERMISSION_CONTACTS=1',
   
           ## dart: PermissionGroup.camera
           # 'PERMISSION_CAMERA=1',
   
           ## dart: PermissionGroup.microphone
           # 'PERMISSION_MICROPHONE=1',
   
           ## dart: PermissionGroup.speech
           # 'PERMISSION_SPEECH_RECOGNIZER=1',
   
           ## dart: PermissionGroup.photos
           # 'PERMISSION_PHOTOS=1',
   
           ## dart: [PermissionGroup.location, PermissionGroup.locationAlways, PermissionGroup.locationWhenInUse]
           # 'PERMISSION_LOCATION=1',
   
           ## dart: PermissionGroup.notification
           # 'PERMISSION_NOTIFICATIONS=1',
   
           ## dart: PermissionGroup.mediaLibrary
           # 'PERMISSION_MEDIA_LIBRARY=1',
   
           ## dart: PermissionGroup.sensors
           # 'PERMISSION_SENSORS=1',   
   
           ## dart: PermissionGroup.bluetooth
           # 'PERMISSION_BLUETOOTH=1',
   
           ## dart: PermissionGroup.appTrackingTransparency
           # 'PERMISSION_APP_TRACKING_TRANSPARENCY=1',
   
           ## dart: PermissionGroup.criticalAlerts
           # 'PERMISSION_CRITICAL_ALERTS=1'
         ]
   
       end
     end
   end
   

   copied to clipboard

2. Remove the # character in front of the permission you do want to use. For example if you need access to the calendar make sure the code looks like this:

           ## dart: PermissionGroup.calendar
           'PERMISSION_EVENTS=1',
   

   copied to clipboard

3. Delete the corresponding permission description in Info.plist e.g. when you don't need camera permission, just delete 'NSCameraUsageDescription' The following lists the relationship between Permission and The key of Info.plist:

   Permission

   Info.plist

   Macro

   PermissionGroup.calendar

   NSCalendarsUsageDescription

   PERMISSION_EVENTS

   PermissionGroup.reminders

   NSRemindersUsageDescription

   PERMISSION_REMINDERS

   PermissionGroup.contacts

   NSContactsUsageDescription

   PERMISSION_CONTACTS

   PermissionGroup.camera

   NSCameraUsageDescription

   PERMISSION_CAMERA

   PermissionGroup.microphone

   NSMicrophoneUsageDescription

   PERMISSION_MICROPHONE

   PermissionGroup.speech

   NSSpeechRecognitionUsageDescription

   PERMISSION_SPEECH_RECOGNIZER

   PermissionGroup.photos

   NSPhotoLibraryUsageDescription

   PERMISSION_PHOTOS

   PermissionGroup.location, PermissionGroup.locationAlways, PermissionGroup.locationWhenInUse

   NSLocationUsageDescription, NSLocationAlwaysAndWhenInUseUsageDescription, NSLocationWhenInUseUsageDescription

   PERMISSION_LOCATION

   PermissionGroup.notification

   PermissionGroupNotification

   PERMISSION_NOTIFICATIONS

   PermissionGroup.mediaLibrary

   NSAppleMusicUsageDescription, kTCCServiceMediaLibrary

   PERMISSION_MEDIA_LIBRARY

   PermissionGroup.sensors

   NSMotionUsageDescription

   PERMISSION_SENSORS

   PermissionGroup.bluetooth

   NSBluetoothAlwaysUsageDescription, NSBluetoothPeripheralUsageDescription

   PERMISSION_BLUETOOTH

   PermissionGroup.appTrackingTransparency

   NSUserTrackingUsageDescription

   PERMISSION_APP_TRACKING_TRANSPARENCY

   PermissionGroup.criticalAlerts

   PermissionGroupCriticalAlerts

   PERMISSION_CRITICAL_ALERTS

4. Clean & Rebuild

---

This plugin is suitable for iOS and Android. This plugin allows Flutter apps to detect network changes. You can know the detailed mobile network types, such as 2G, 3G, 4G, 5G. This plugin also allows you to see the status of internet connection

Use

Example

1. get NETWORK_TYPE ** Note: Android must dynamically obtain the READ_PHONE_STATE permission to judge 2G/3G/4G/5G**

  String _networkTypeStatic = 'Unknown';

  //widget
  Column(
    mainAxisAlignment: MainAxisAlignment.spaceAround,
    children: [
      const Text('NETWORK_TYPE : '),
      Text(
        _networkTypeStatic,
        style: const TextStyle(fontWeight: FontWeight.bold),
      ),
      TextButton(
        onPressed: () {
          _getCurrentNetworkStatus();
        },
        child: const Text('Get-Data'),
        style: ButtonStyle(
          backgroundColor: MaterialStateProperty.all(
              const Color.fromARGB(255, 162, 229, 188)),
        ),
      )
    ],
  ),

  //function

  _getCurrentNetworkStatus() async {
    if (Platform.isAndroid) {
      await NetworkTypeReachability().getPermisionsAndroid;
    }
    NetworkStatus status =
        await NetworkTypeReachability().currentNetworkStatus();
    switch (status) {
      case NetworkStatus.unreachable:
      //unreachable
      case NetworkStatus.wifi:
      //wifi
      case NetworkStatus.mobile2G:
      //2g
      case NetworkStatus.mobile3G:
      //3g
      case NetworkStatus.mobile4G:
      //4g
      case NetworkStatus.mobile5G:
      //5h
      case NetworkStatus.othermobile:
      //other
    }
    setState(() {
      _networkTypeStatic = status.toString();
    });
  }
    

2. You can also listen for NETWORK_TYPE changes by subscribing to the stream exposed by Network_type_reachability plugin

  String _networkTypeSuscription = 'Unknown';
  StreamSubscription<NetworkStatus> subscriptionNetworkType;

  @override
  void initState() {
    super.initState();
    _listenNetworkStatus();
  }

  @override
  void dispose() {
    super.dispose();
    subscriptionNetworkType.cancel();
  }

  _listenNetworkStatus() async {
    if (Platform.isAndroid) {
      await NetworkTypeReachability().getPermisionsAndroid;
    }
    subscriptionNetworkType =
        NetworkTypeReachability().onNetworkStateChanged.listen((event) {
      setState(() {
        _networkTypeSuscription = "$event";
      });
    });
  }


  // Widget
  Column(
    mainAxisAlignment: MainAxisAlignment.center,
    children: [
      const Text('NETWORK_TYPE Suscription: '),
      Text(
        _networkTypeSuscription,
        style: const TextStyle(fontWeight: FontWeight.bold),
      ),
    ],
  ),

3. get Status Internet Conection

  String connectivityInternetStatic = 'Unknown';

  // Widget
  Column(
    mainAxisAlignment: MainAxisAlignment.spaceAround,
    children: [
      const Text('Status Internet Conection : '),
      Text(
        connectivityInternetStatic,
        style: const TextStyle(fontWeight: FontWeight.bold),
      ),
      TextButton(
        onPressed: () async {
          print('#=======> cargando');
          connectivityInternetStatic = 'loading...';
          setState(() {});
          InternetStatusConnection data =
              await NetworkTypeReachability()
                  .getInternetStatusConnection();
          print(data);
          print('#=======> finalizando');

          connectivityInternetStatic = data.toString();
          setState(() {});
        },
        child: const Text('Get-Data'),
        style: ButtonStyle(
          backgroundColor: MaterialStateProperty.all(
              const Color.fromARGB(255, 162, 229, 188)),
        ),
      )
    ],
  ),
    

4. get Status Internet Conection Suscription NOTE: It is recommended not to keep the listening state constantly since behind what it does is load the google.com page and this would constantly consume many megabytes of internet over time

  String connectivityInternetSuscription = 'Unknown';
  StreamSubscription<InternetStatusConnection> subscriptionInternetConnection;

  @override
  void initState() {
    super.initState();
    _listenInternetConnection();
  }

  @override
  void dispose() {
    super.dispose();
    subscriptionInternetConnection.cancel();
    NetworkTypeReachability().listenInternetConnection = false;
  }


  // Widget
  Column(
    mainAxisAlignment: MainAxisAlignment.center,
    children: [
      const Text('Status Internet Conection : '),
      Text(
        connectivityInternetSuscription,
        style: const TextStyle(fontWeight: FontWeight.bold),
      ),
    ],
  )

Getting Started

This project is a starting point for a Flutter plug-in package, a specialized package that includes platform-specific implementation code for Android and/or iOS.

For help getting started with Flutter, view our online documentation, which offers tutorials, samples, guidance on mobile development, and a full API reference.