The birdiary project provides a manual and software to upload videos of birds feeding in your garden to their internet platform. The videos are taken with a raspicam and triggered by a balance on which the feeding bird sits. My code was derived from the project's 120423.img and the pigpio library among others.

My own image for flashing to the SD card is configured with the password: 'pi / bird24' ('bird24root' for su). You can find the installation instructions here. Use your own API keys from birdiary in 'station2/configBird.py' (configBird2.py). Also use your own API keys or credentials in any scripts that communicate with the outside world, such as Macrodroid (mdroid.sh). Once this is done, reboot and point any browser to 'http:// your-stations-ip4 :8080'.

Decide for your version of the picamera software, i.e. for the python module 'picamera' choose legacy picamera in raspi-config and gpu_mem=256 in /boot/config.txt, but for 'picamera2' disable them both. Picamera2 is more advanced and preinstalled with bullseye, but can only flip it's view. If you have built in your raspicam sideways, you may prefer the legacy 'picamera', which can rotate the view.

After a reboot you can try it:

• for 'picamera' my scripts mainFoBird.py (direct video upload on balance trigger) or mainAckBird.py (upload after acknowledgement)
• for 'picamera2' mainFoBird2.py (direct upload) or mainAckBird2.py (upload after confirmation)
• with the mainAckBirdX versions you do not need the old debug mode, as the bird's video is not uploaded to birdiary, before you viewed it in the browser.

Have a look at 'startup.sh' to find out my choices. Watch the code working as a beta on my station and learn more about my making. There are also some pictures as well as a troubleshooting guide in case of issues with my software.

If you need to calibrate your scale, first kill the process 'hxFiBird.py'. You find its PID by using 'ps aux|grep pi'. Then run 'python3 calibrateHx711.py' and put your scales values into configBirdX.py . Then 'sudo reboot'.

Using the python3 modules 'picamera2' and 'pigpio' (for DHT20 and HX711) the code should work on RaspberryZero2W as well as Raspberry4 and with Raspbian Bullseye (Debian 11) and Bookworm (Debian 12).

I did not install any code for the microfone. Adafruit I2S MEMS Mikrofon SPH0645LM4H may not yet be working with Bookworm anyway. Bird song monitoring can be an RPi project of its own, using an USB soundcard mic, sonograms and a sound world map like in BirdNET-PI.