Add ec2-runners action

This was copied from https://github.com/Cargill/splinter

Signed-off-by: Ryan Beck-Buysse <[email protected]>

.github/actions/ec2-runners/Dockerfile

@@ -0,0 +1,27 @@
+# Copyright 2018-2022 Cargill Incorporated
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+FROM ubuntu:focal
+
+RUN apt-get update && apt-get install -yq --no-install-recommends \
+    python3 \
+    python3-pip \
+ && pip3 install \
+    botocore \
+    boto3 \
+    requests
+
+COPY aws.py /aws.py
+
+ENTRYPOINT ["/aws.py"]

.github/actions/ec2-runners/README.md

@@ -0,0 +1,171 @@
+# ec2-runners
+
+Creates a self-hosted runner for Github Actions on EC2. Useful for when
+Github hosted runners are too slow.
+This is exposed as a Github Actions self-hosted runner scoped to the repo where
+this action is run from.
+
+Provides two actions:
+
+`start`:
+
+  * Creates two instances
+  * Bootstraps the buildx cluster
+  * Installs GHA runner software with the `--ephemeral` option
+
+`stop`:
+
+  * Terminates any instances whose name matches the label provided
+
+# Example usage
+
+```yaml
+name: GHA Buildx
+on:
+  - push
+  - workflow_dispatch
+jobs:
+  start_cluster:
+    name: Start buildx cluster
+    runs-on: ubuntu-latest
+    outputs:
+      label: ${{ steps.start_buildx_cluster.outputs.label }}
+    steps:
+      - name: Configure AWS credentials
+        uses: aws-actions/configure-aws-credentials@v1
+        with:
+          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
+          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+          aws-region: ${{ secrets.AWS_REGION }}
+
+      - name: Start EC2 runners
+        id: start_buildx_cluster
+        uses: ./.github/actions/ec2-runners
+        with:
+          action: start
+          amd_ami_id: ${{ secrets.AMD_AMI_ID }}
+          amd_instance_type: t2.nano
+          arm_ami_id: ${{ secrets.ARM_AMI_ID }}
+          arm_instance_type: t4g.nano
+          gh_personal_access_token: ${{ secrets.GH_PERSONAL_ACCESS_TOKEN }}
+          mode: buildx
+          security_group_id: ${{ secrets.SECURITY_GROUP_ID }}
+          subnet: ${{ secrets.SUBNET }}
+
+  build_docker:
+    name: Build docker
+    needs: start_cluster
+    runs-on: ${{ needs.start_cluster.outputs.label }}
+    steps:
+      - name: Debug
+        run: docker buildx ls
+
+  stop_cluster:
+    name: Stop buildx cluster
+    needs:
+      - start_cluster
+      - build_docker
+    runs-on: ubuntu-latest
+    if: ${{ always() }}
+    steps:
+      - name: Configure AWS credentials
+        uses: aws-actions/configure-aws-credentials@v1
+        with:
+          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
+          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+          aws-region: ${{ secrets.AWS_REGION }}
+
+      - name: Destroy cluster
+        uses: ./.github/actions/ec2-runners
+        with:
+          action: stop
+          label: ${{ needs.start_cluster.outputs.label }}
+```
+
+# Configuration
+
+## Inputs
+
+`action`
+
+  * `start` - deploy a new cluster
+  *  `stop` - destroy a running cluster
+
+`amd_ami_id`
+
+AMI ID for the AMD instance. Should have docker installed.
+
+`amd_instance_type`
+
+Instance Type for the AMD instance
+
+`arm_ami_id`
+
+AMI ID for the ARM instance. Should have Docker installed and daemon exposed on
+port `2375`.
+
+`arm_instance_type`
+
+Instance Type for the ARM instance
+
+`gh_personal_access_token`
+
+GitHub Personal Access Token with "repo" permissions
+
+`label`
+
+Label applied to the created EC2 instances during creation.
+No effect during `start`.
+This is required when running the `stop` action.
+
+`mode`
+
+  * `buildx` - start a two node buildx cluster for multi-arch builds
+  * `single` - start a single self-hosted AMD runner
+
+Defaults to `buildx`
+
+`security_group_id`
+
+Must allow inbound traffic from the local subnet to port `2375`.
+Must allow outbound traffic to connect to GitHub.
+
+`subnet`
+
+Subnet to apply to the instances
+
+## Outputs
+
+`label`
+
+Random value generated when creating a new cluster.
+This is used for job isolation.
+Capture this output in the `start` action to provide to the `stop` action so
+the instances are terminated.
+
+# Setup
+
+Assumes you have two pre-builts AMIs
+
+AMD runner: Docker installed
+
+ARM runner: Docker installed and daemon exposed on port `2375`
+
+Steps to expose docker daemon:
+
+```
+sudo vi /etc/docker/daemon.json
+
+{
+  "hosts": ["unix:///var/run/docker.sock", "tcp://0.0.0.0:2375"]
+}
+```
+```
+sudo vi /lib/systemd/system/docker.service
+ExecStart=/usr/bin/dockerd --containerd=/run/containerd/containerd.sock
+```
+```
+sudo systemctl daemon-reload
+
+sudo systemctl restart docker.service
+```

.github/actions/ec2-runners/action.yml

@@ -0,0 +1,78 @@
+name: GHA Buildx
+description: Provision a self-hosted buildx cluster for GHA
+inputs:
+  action:
+    description: >-
+        - 'start' - deploy a new cluster
+        - 'stop' - destroy the a running cluster
+    required: true
+
+  amd_ami_id:
+    description: >-
+      AMI ID for the AMD instance
+    required: false
+
+  amd_instance_type:
+    description: >-
+      Instance Type for the AMD instance
+    required: false
+
+  arm_ami_id:
+    description: >-
+      AMI ID for the ARM instance
+    required: false
+
+  arm_instance_type:
+    description: >-
+      Instance Type for the ARM instance
+    required: false
+
+  gh_personal_access_token:
+    description: >-
+      GitHub Personal Access Token
+    required: true
+
+  label:
+    description: >-
+      Label applied to the created EC2 instances.
+      This is required when running the 'stop' action.
+    required: false
+
+  mode:
+    description: >-
+      'buildx' - start a two node buildx cluster for multi-arch builds.
+      'single' - start a single self-hosted AMD runner.
+      Defaults to 'buildx'.
+    required: false
+    default: 'buildx'
+
+  security_group_id:
+    description: >-
+      Must allow outbound traffic to connect to GitHub
+    required: false
+
+  subnet:
+    description: >-
+      Subnet to apply to the instances
+    required: false
+
+outputs:
+  label:
+    description: >-
+      Random value generated when creating a new cluster.
+      Used to make sure jobs only run on the clusters they create.
+
+runs:
+  using: 'docker'
+  image: 'Dockerfile'
+  args:
+    - ${{ inputs.action }}
+    - ${{ inputs.amd_ami_id }}
+    - ${{ inputs.amd_instance_type }}
+    - ${{ inputs.arm_ami_id }}
+    - ${{ inputs.arm_instance_type }}
+    - ${{ inputs.gh_personal_access_token }}
+    - ${{ inputs.label }}
+    - ${{ inputs.mode }}
+    - ${{ inputs.security_group_id }}
+    - ${{ inputs.subnet }}