Holzschnabel Modules

ARCHIVED REPO, FIND THE MODULES IN https://github.com/jensschulze/GoodSheperd!

Modules for VCV Rack

I don’t know, somehow I felt the urge to start a new plugin for VCV Rack mainly because the GoodSheperd modules need an overhaul and I wanted to start on a clean slate.

• Switch1: bistable switch with separate trigger inputs for each state.
• Seqtrol: forces SEQ3 and many other sequencers to play the first note on MIDI START instead of skipping it. Use the MIDI clock (not the CLK/N clock) and choose the divisor from Seqtrol’s context menu! Have a look at RCM SEQ Adapter if you want this functionality for an internal clock.

Switch1

A non-toggling latching 2:1 switch. You can select one out of two input signals to be forwarded to the output. With a trigger pulse on a trigger input the respective input can be selected.

Inputs

Tr 1 (2x)/Tr 2 (2x): Two trigger inputs for each In (OR-linked). A rising edge triggers. If Trigger 1 and Trigger 2 are fired simulataneously, Input 1 always wins.

In 1/2: Signal inputs.

Outputs

Out: Switch output.

Typical wiring

Sectrol

Inputs

Start: Connect with the Start output of your MIDI module. A trigger signal sends a reset and forwards the clock to the Clock output.

Cont: Connect with the Continue output of your MIDI module. A trigger signal forwards the clock to the Clock output.

Stop: Connect with the Stop output of your MIDI module. A trigger signal stops the clock at the Clock output.

Clock: Connect with the Clock output of your MIDI module. Use the raw clock here, do not use the Clock Divider from the MIDI module! See Context Menu.

Outputs

Reset: Connect with the Reset input of your sequencer module.

Clock: Connect with the Clock input of your sequencer module.

Context Menu

Clock divisor: Set the note value of the Clock Output. There are 96 MIDI clock ticks per whole note.

Typical wiring