x-ui

I'll explain how to set up the popular v2ray platform to bypass almost any GFW like a knife through butter. If you like the project and found it helpful, please star the project and share it with others!

Note The following instructions require some technical background on Linux, Docker, Certificates, and some concepts about networking and VPNs in general. If you have any questions or suggestions, feel free to open an Issue or a Pull request.

Table of Contents

• 💫 Requirements
• 🪖 (optional) Safety first
• 🐳 Docker second
• 🚀 Rise and shine: X-UI
• 🗝️ TLS Encryption
• 📬 Adding Inbounds
• 👻 IPv6 is here to help
• 🚆 (optional) Tunnel your way through
• 🚤 Speeding up TCPs
• 🧱 Hide behind CDN
• ⚒️ Cloudflare's alternative for CDNs
• 🎗️ Simple Routing
• 🤝 Issues and Contributions
• 📖 Credits
• 🍩 Donate

1. 💫 Requirements

First things first, you need a domain and a VPS. It doesn't matter what TLD you go for as long as it's not a .ir obviously, but feel free to checkout the popular TLDs to find one that matches your style. For your VPS, I always get mine from pulseheberg, because not only they have the best prices, but also cryptocurrency payment method.

Once you got yourself a domain and server, Create a Cloudflare account and register them both. It may take a few hours for your chances to settle it. Once done, map a subdomain to your server IPv4 (Leave proxied unchecked for now). This can take a few minutes to take effect and you can check it's availablity with a tool like dnschecker.

2. 🪖 (optional) Safety first

I always enjoy the extra security on my servers. If you do too, then run the scripts/ufw.sh to enable your firewall with default policies and add the ports we need for our work.

• Port 54321: Default dashboard's UI
• Port 2053: V2ray's inbound port

3. 🐳 Docker second

Docker is the perfect tool for our job since it's clean and easy to deploy stuff with. If you don't have it already, running the scripts/docker.sh script will take care of it for you.

4. 🚀 Rise and shine: X-UI

1. There is a template file .env.template which contains placeholders for variables that you have to change accordingly. When you are done editing, rename the file to .env.

2. Make sure nothing is blocking ports 80 and 443 (specially NGINX) for now. If there is any process using it at the time, stop it temporarily.

3. Run the build.sh script which will deploy two containers. One for the X-UI dashboard and the second to create a SSL certificate using CertBot.

4. All done! Access your dashboard via <SERVER-IP>:<DASHBOARD-PORT:-54321> and with default username/password as admin.

5. 🗝️ TLS Encryption

Connecting to your server with the old-fashioned HTTP protocol or creating a VPN without any TLS encryption will leave your exposed to the outside world. Here is how to fix it:

1. On your Cloudflare account, set the SSL/TLS level to strict or beyond.

2. Navigate to Panel Settings and change the following fields:

   • Panel certificate.crt file path: /etc/letsencrypt/live/{DOMAIN}/fullchain.pem
   • Panel private.key file path: /etc/letsencrypt/live/{DOMAIN}/privkey.pem

From now on, access your dashboard via <DOMAIN>:<DASHBOARD-PORT> which is highly recommended.

6. 📬 Adding Inbounds

There are many inbound combinations, configurations, and protocols you can use here. I would suggest the following configurations because it will give us better performance and security:

• Remark: vmess-ws-tls
• Protocol: vmess
• Port: 2053
• Disable insecure encryption: True
• Transmission: ws
• TLS: True
• certificate.crt file path: /etc/letsencrypt/live/{DOMAIN}/fullchain.pem
• private.key file path: /etc/letsencrypt/live/{DOMAIN}/privkey.pem
• Sniffing: True

The following onfiguration can be faster under certain circumstances. Add the following as your second inbound:

• Remark: trojan-tcp-xtls
• Protocol: Trojan
• Port: 443
• Disable insecure encryption: True
• Transmission: TCP
• xtls: True
• certificate.crt file path: /etc/letsencrypt/live/{DOMAIN}/fullchain.pem
• private.key file path: /etc/letsencrypt/live/{DOMAIN}/privkey.pem
• Sniffing: True

Each of the above inbounds have their own merits and drawbacks. Feel free to play with different combinations to find the one that suites your needs best.

7. 👻 IPv6 is here to help

As of now, not all ISPs support IPv6, and thus this may not work for some. But we will configure it in a way to prefer IPv6 if available.

1. You need three pieces: PUBLIC_IPV6_GATEWAY, PUBLIC_IPV6_ADDRESS and IPV6_NAMESERVERS
2. Configure your server's IPv6 address to point to your domain on your Cloudflare.
3. Modify /etc/netplan/50-cloud-init.yaml to enable IPv6 on your VPS:

network:
    version: 2
    ethernets:
        eth0:
            addresses:
            - PUBLIC_IPV4_ADDRESS/20
            - 10.48.0.9/16
            - PUBLIC_IPV6_ADDRESS/64
            match:
                macaddress: <HIDDEN>
            mtu: 1500
            nameservers:
                addresses:
                - <HIDDEN>
                - <HIDDEN>
                - IPV6_NAMESERVERS_1
                - IPV6_NAMESERVERS_2
                search: []
            routes:
            -   to: 0.0.0.0/0
                via: PUBLIC_IPV4_GATEWAY
            -   to: PUBLIC_IPV6_GATEWAY
                scope: link
            set-name: eth0

Caution

Pay extra attention to the routes ordering. IPv4 comes first as IPv6 is not supported on all ISPs and should not be set as your primary route.

8. 🚆 (optional) Tunnel your way through

Tunneling is a clever way to bypass GFWs and may give you higher speed at a cost of a second VPS server. The idea is to not directly connect to your "upstream server" anymore, but to connect to an intermediate server that we call a "bridge server". This server acts as a tunnel for your traffic and it placed inside a big known data center in your own country.

Here is how to do it:

1. Set up a new VPS server that is located within a data center in your own country. The process is like before, but with a new DOMAIN. (Use a new <DOMAIN>)
2. I would suggest the vmess-ws-tls combination for your upstream server.
3. Replace the configurations from scripts/bridge-server.json on your bridge serve, and scripts/upstream-server.json on your upstream server with the existing XRAY Configuration. You may have to Change specific parts according to your upstream inbound.

9. 🚤 Speeding up TCPs

Google's upgraded congestion control algorithms will slightly improve your TCP connection speed. To apply it to your system, run the scripts/bbr.sh script.

10. 🧱 Hide behind CDN

If you have made it so far, you are almost done. Your VPN works perfectly fine by now, but your server IP is still exposed and can still get blocked. One genius idea is to move your DOMAIN behind CDN to make it almost impossible to get to your server IP address. No GFW will dare to block Cloudflare CDNs as they serve tens of millions of websites all over the world.

Important

Make sure your VPS is working fine before continuing to this step.

1. On Cloudflare, enable Strict SSL/TLS.
2. For your inbound to work behind a CDN, it should be of transmission type ws. I would suggest the vmess-ws-tls combination.
3. On Cloudflare, turn on proxied for both IPv4 and IPv6.
4. Ping your <DOMAIN> and see if the IP changes to something other than your VPS IP. This can take a few minutes to hours.

11. ⚒️ Cloudflare's alternative for CDNs

CDNs are great, they really are, but Cloudflare Workers are the new and scalable Cloudflare's solution to replace the CDNs. Here is how to set it up:

1. Create a worker from Cloudflare.
2. Copy and modify the script scripts/worker.js to your worker and deploy it.
3. Optionally, to get rid of initial your Cloudflare worker address, connect your Worker to a custom domain (Can take a few minutes to hours to take effect).
4. Modify your client config by replacing the address, SNI, and request host with your worker address and your port to 443.

Note

Cloudflare workers support more ports (80, 443, 2052, 2053, 2082, 2083, 2086, 2087, 2095, 2096, 8080, 8443, 8880) that you can use to forward your traffic to X-UI (remember could only use 443 for CDN). I used 2053 for this guide.

12. 🎗️ Simple Routing

It's probably not a good idea to pass all the traffic throught a VPN. Instead, you can use the Routing feature to filter the ones you want to pass through. Go to program -> preferences -> Routing Settings -> Custom and add the following rule:

{
    "rules": [
        {
            "domain": [
                "regexp:.*\.ir(/|$).*"
            ],
            "outboundTag": "direct",
            "type": "field"
        }
    ]
}

You can also use the Simple Routing feature of Nekoray to add handpicked domains or IPs to your routing settings.

🤝 Issues and Contributions

Feel free to ask questions via issue or add your creative ideas by opening a pull request.

📖 Credits

• BBR Script - The script that makes TCP go kaboom
• X-UI Image - The English version of the X-UI Image
• iran-hosted-domains - V2ray routing guide

🍩 Donate

Support me on developing this repository.