Skip to content

Minimal adapter board for converting keyboard i2c oled pins to ffc/fpc ribbon cable for keyboards such as crkbd or kyria

License

Notifications You must be signed in to change notification settings

keyboard-magpie/minimal-fpc-i2c-pcb

Repository files navigation

minimal-fpc-i2c-pcb

Minimal adapter board for converting keyboard i2c oled pins to ffc/fpc ribbon cable for keyboards such as crkbd, kimiko or kyria, intended to make using cirque glidepoint trackpads easier with keyboards that already have an OLED header. Screenshot_2022-07-07_at_13 14 48

how to use

To use the TM035035 and TM040040 with 5v controllers, on the back trackpad, remove R1 for I2C, and remove R7 and R8 for 5V (leave these if using with 3v3 controllers i.e. rp2040.

holders

In the holders folder you will find holders for the curved overlays (35 and 40mm- please note there was an earlier misnaming of these files which I have corrected as of 16 Feb 2023).

production

Please note there is a small error in the cpl file for the ffc connector that comes from the footprint for it. JLC should correct its placement for you.

Connector used is this one from LCSC: https://lcsc.com/product-detail/FFC-FPC-Connectors_SHENZHEN-ATOM-TECH-FPC05012-09200_C479750.html

alternative FPC connectors:

https://www.digikey.co.uk/en/products/detail/hirose-electric-co-ltd/FH12-12S-0.5SH-55/1110374
https://www.digikey.co.uk/en/products/detail/gct/FFC2B35-12-G/15970866
Both of the above were suggested by u/idyllic on discord and look to have a footprint that is very close the the LCSC part above and should be compatible.

ffc/fpc cables

Any generic flat flex cable can be used, they are 12 position, 0.5mm pitch, same-sided contacts. The molex extra flex and primo flex series from mouser seem to work well.

About

Minimal adapter board for converting keyboard i2c oled pins to ffc/fpc ribbon cable for keyboards such as crkbd or kyria

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published