StartupBrightness.txt
My tasmota bulbs are not always online but connected to a wall switch.
They are hard connected to current when i switch on.
At night i want to start with dimmed light.
Start tasmota lightbulb with specific brightness depending on time of day.
Tasmota Lampe abhängig von der Tageszeit mit bestimmter Helligkeit einschalten
MasterSlave.txt
I use two plugs in master/slave. An amp and a subwoofer are connected.
When the amp is switched on/off, the sub also is switched on/off.
First i had a flood of mqtt messages because on EVERY power change
there was a message! rule1 5 changed that to one message per on/off change.