krops (krebs operations)

krops is a lightweight toolkit to deploy NixOS systems, remotely or locally.

Some Features

• store your secrets in password store or passage
• build your systems remotely
• minimal overhead (it's basically just nixos-rebuild switch!)
• run from custom nixpkgs branch/checkout/fork

Minimal Example

Create a file named krops.nix (name doesn't matter) with following content:

let
  krops = (import <nixpkgs> {}).fetchgit {
    url = https://cgit.krebsco.de/krops/;
    rev = "v1.25.0";
    sha256 = "07mg3iaqjf1w49vmwfchi7b1w55bh7rvsbgicp2m47gnj9alwdb6";
  };

  lib = import "${krops}/lib";
  pkgs = import "${krops}/pkgs" {};

  source = lib.evalSource [{
    nixpkgs.git = {
      clean.exclude = ["/.version-suffix"];
      ref = "4b4bbce199d3b3a8001ee93495604289b01aaad3";
      url = https://github.com/NixOS/nixpkgs;
    };
    nixos-config.file = toString (pkgs.writeText "nixos-config" ''
      { pkgs, ... }: {
        fileSystems."/" = { device = "/dev/sda1"; };
        boot.loader.systemd-boot.enable = true;
        services.openssh.enable = true;
        environment.systemPackages = [ pkgs.git ];
        users.users.root.openssh.authorizedKeys.keys = [
          "ssh-rsa ADD_YOUR_OWN_PUBLIC_KEY_HERE user@localhost"
        ];
      }
    '');
  }];
in
  pkgs.krops.writeDeploy "deploy" {
    source = source;
    target = "root@YOUR_IP_ADDRESS_OR_HOST_NAME_HERE";
  }

and run $(nix-build --no-out-link krops.nix) to deploy the target machine. krops exports some funtions under krops. namely:

writeDeploy

This will make the sources available on the target machine below /var/src, and execute nixos-rebuild switch -I /var/src.

target

The target attribute to writeDeploy can either be a string or an attribute set, specifying where to make the sources available, as well as where to run the deployment.

If specified as string, the format could be described as:

[[USER]@]HOST[:PORT][/SOME/PATH]

Portions in square brackets are optional.

If the USER is the empty string, as in e.g. @somehost, then the username will be obtained by ssh from its configuration files.

If the target attribute is an attribute set, then it can specify the attributes extraOptions, host, path, port, sudo, and user. The extraOptions is a list of strings that get passed to ssh as additional arguments. The sudo attribute is a boolean and if set to true, then it's possible to to deploy to targets that disallow sshing in as root, but allow (preferably passwordless) sudo. Example:

pkgs.krops.writeDeploy "deploy" {
  source = /* ... */;
  target = lib.mkTarget "user@host/path" // {
    extraOptions = [
      "-o" "LogLevel=DEBUG"
    ];
    sudo = true;
  };
}

For more details about the target attribute, please check the mkTarget function in lib/default.nix.

backup (optional, defaults to false)

Backup all paths specified in source before syncing new sources.

buildTarget (optional)

If set the evaluation and build of the system will be executed on this host. buildTarget takes the same arguments as target. Sources will be synced to both buildTarget and target. Built packages will be uploaded from the buildTarget to target directly This requires the building machine to have ssh access to the target. To build the system on the same machine, that runs the krops command, set up a local ssh service and set the build host to localhost.

crossDeploy (optional, defaults to false)

Use this option if target host architecture is not the same as the build host architecture as set by buildHost i.e. deploying to aarch64 from a x86_64 machine. Setting this option will disable building & running nix in the wrong architecture when running nixos-rebuild on the deploying machine. It is required to set nixpkgs.localSystem.system in the NixOS configuration to the architecture of the target host. This option is only useful if the build host also has remote builders that are capable of producing artifacts for the deploy architecture.

fast (optional, defaults to false)

Run nixos-rebuild immediately without building the system in a dedicated nix build step.

force (optional, defaults to false)

Create the sentinel file (/var/src/.populate) before syncing the new source.

operation (optional, defaults to "switch")

Specifies which nixos-rebuild operation to perform.

useNixOutputMonitor (optional, defaults to "opportunistic")

Specifies when to pipe nixos-rebuild's output to nom.

Supported values:

• "opportunistic" (default) - Use nom only if it is present on the target machine.

• "optimistic" - Use nom, assuming it is present on the target machine.

• "pessimistic" - Use nom via nix-shell on the target machine.

• true - Use nom. If it is not present on the target machine, then use it via nix-shell.

• false - Don't use nom

writeTest

Very similiar to writeDeploy, but just builds the system on the target without activating it.

This basically makes the sources available on the target machine below /var/src, and executes NIX_PATH=/var/src nix-build -A system '<nixpkgs/nixos>'.

target

see writeDeploy

backup (optional, defaults to false)

see writeDeploy

force (optional, defaults to false)

see writeDeploy

trace (optional, defaults to false)

run nix-build with --show-trace

writeCommand

This can be used to run other commands than nixos-rebuild or pre/post build hooks.

command

A function which takes the targetPath as an attribute. Example to activate/deactivate a swapfile before/after build:

pkgs.krops.writeCommand "deploy-with-swap" {
  source = source;
  target = "root@YOUR_IP_ADDRESS_OR_HOST_NAME_HERE";
  command = targetPath: ''
    swapon /var/swapfile
    nixos-rebuild -I ${targetPath} switch
    swapoff /var/swapfile
  '';
}

target

see writeDeploy

backup (optional, defaults to false)

see writeDeploy

force (optional, defaults to false)

see writeDeploy

allocateTTY (optional, defaults to false)

whether the ssh session should do a pseudo-terminal allocation. sets -t on the ssh command.

Source Types

derivation

Nix expression to be built at the target machine.

Supported attributes:

• text - Nix expression to be built.

file

The file source type transfers local files (and folders) to the target using rsync.

Supported attributes:

• path - absolute path to files that should by transferred.

• useChecksum (optional) - boolean that controls whether file contents should be checked to decide whether a file has changed. This is useful when path points at files with mangled timestamps, e.g. the Nix store.

  The default value is true if path is a derivation, and false otherwise.

• filters (optional) List of filters that should be passed to rsync. Filters are specified as attribute sets with the attributes type and pattern. Supported filter types are include and exclude. Checkout the filter rules section in the rsync manual for further information.

• deleteExcluded (optional) boolean that controls whether the excluded directories should be deleted if they exist on the target. This is passed to the --delete-excluded option of rsync. Defaults to true.

git

Git sources that will be fetched on the target machine.

Supported attributes:

• url - URL of the Git repository that should be fetched.

• ref - Branch / tag / commit that should be fetched.

• clean.exclude - List of patterns that should be excluded from Git cleaning.

• shallow (optional) boolean that controls whether only the requested commit ref. should be fetched instead of the whole history, to save disk space and bandwith. Defaults to false.

pass

The pass source type transfers contents from a local password store to the target machine.

Supported attributes:

• dir - absolute path to the password store.

• name - sub-directory in the password store.

passage

The passage source type decrypts files from a local passage store and transfers them to the target using rsync.

Supported attributes:

• dir - Path to the passage store. For a partial transfer, this may point to a subdirectory. Example: ~/.passage/store/hosts/MYHOSTNAME

• identities_file (optional) - Path to the identities file. Defaults to ~/.passage/identities.

• age (optional) - Path of the age binary. Defaults to age (absolute path gets resolved using passage's search path.)

pipe

Executes a local command, capture its stdout, and send that as a file to the target machine.

Supported attributes:

• command - The (shell) command to run.

symlink

Symlink to create at the target, relative to the target directory. This can be used to reference files in other sources.

Supported attributes:

• target - Content of the symlink. This is typically a relative path.

References

• In-depth example by Ingolf Wagner

Communication

Comments, questions, pull-requests and patches, etc. are very welcome, and can be directed at:

• IRC: #krebs at hackint
• Mail: [email protected]
• Github: https://github.com/krebs/krops/