Worker Pool

A pool of gen servers.

Abstract

The goal of worker pool is pretty straightforward: To provide a transparent way to manage a pool of workers and do the best effort in balancing the load among them distributing the tasks requested to the pool.

Documentation

The documentation can be generated from code using edoc with rebar3 edoc or using erldocs with make erldocs. It is also available online here

Usage

All user functions are exposed through the wpool module.

Starting the Application

Worker Pool is an erlang application that can be started using the functions in the application module. For convenience, wpool:start/0 and wpool:stop/0 are also provided.

Starting a Pool

To start a new worker pool, you can either use wpool:start_pool (if you want to supervise it yourself) or wpool:start_sup_pool (if you want the pool to live under wpool's supervision tree). You can provide several options on any of those calls:

• overrun_warning: The number of milliseconds after which a task is considered overrun (i.e. delayed) so a warning is emitted using overrun_handler. The task is monitored until it is finished, thus more than one warning might be emitted for a single task. The rounds of warnings are not equally timed, an exponential backoff algorithm is used instead: after each warning the overrun time is doubled (i.e. with overrun_warning = 1000 warnings would be emmited after 1000, 2000, 4000, 8000 ...) The default value for this setting is infinity (i.e. no warnings are emitted)

• max_overrun_warnings: The maximum number of overrun warnings emitted before killing a delayed task: that is, killing the worker running the task. If this parameter is set to a value other than infinity the rounds of warnings becomes equally timed (i.e. with overrun_warning = 1000 and max_overrun_warnings = 5 the task would be killed after 5 seconds of execution) The default value for this setting is infinity (i.e. delayed tasks are not killed)

  NOTE: As the worker is being killed it might cause worker's messages to be missing if you are using a worker stategy other than available_worker (see worker strategies below)

• overrun_handler: The module and function to call when a task is overrun. The default value for this setting is {error_logger, warning_report}. Repor values are:

  • {alert, AlertType}: Where AlertType is overrun on regular warnings, or max_overrun_limit when the worker is about to be killed.
  • {pool, Pool}: The poolname
  • {worker, Pid}: Pid of the worker
  • {task, Task}: A description of the task
  • {runtime, Runtime}: The runtime of the current round

• workers: The number of workers in the pool. The default value for this setting is 100

• worker_type: The type of the worker. The available values are gen_server. The default value is gen_server. Eventually we'll add gen_statem as well.

• worker: The gen_server module that each worker will run and the InitArgs to use on the corresponding start_link call used to initiate it. The default value for this setting is {wpool_worker, undefined}. That means that if you don't provide a worker implementation, the pool will be generated with this default one. wpool_worker is a module that implements a very simple RPC-like interface.

• worker_opt: Options that will be passed to each gen_server worker. This are the same as described at gen_server documentation.

• worker_shutdown: The shutdown option to be used in the child specs of the workers. Defaults to 5000.

• strategy: Not the worker selection strategy (discussed below) but the supervisor flags to be used in the supervisor over the individual workers (wpool_process_sup). Defaults to {one_for_one, 5, 60}

• pool_sup_intensity and pool_sup_period: The intensity and period for the supervisor that manages the worker pool system (wpool_pool). The strategy of this supervisor must be one_for_all but the intensity and period may be changed from their defaults of 5 and 60.

• pool_sup_shutdown: The shutdown option to be used for the supervisor over the individual workers (wpool_process_sup). That is, the value set in the child spec for this supervisor, which is specified in its parent supervisor (wpool_pool).

• queue_type: Order in which requests will be stored and handled by workers. This option can take values lifo or fifo. Defaults to fifo.

• enable_callbacks: A boolean value determining if event_manager should be started for callback modules. Defaults to false.

• callbacks: Initial list of callback modules implementing wpool_process_callbacks to be called on certain worker events. This options will only work if the enable_callbacks is set to true. Callbacks can be added and removed later by wpool_pool:add_callback_module/2 and wpool_pool:remove_callback_module/2.

Using the Workers

Since the workers are gen_servers, messages can be called or casted to them. To do that you can use wpool:call and wpool:cast as you would use the equivalent functions on gen_server.

Choosing a Strategy

Beyond the regular parameters for gen_server, wpool also provides an extra optional parameter: Strategy. The strategy used to pick up the worker to perform the task. If not provided, the result of wpool:default_strategy/0 is used. The available strategies are defined in the wpool:strategy/0 type and also described below:

best_worker

Picks the worker with the smaller queue of messages. Loosely based on this article. This strategy is usually useful when your workers always perform the same task, or tasks with expectedly similar runtimes.

random_worker

Just picks a random worker. This strategy is the fastest one when to select a worker. It's ideal if your workers will perform many short tasks.

next_worker

Picks the next worker in a round-robin fashion. That ensures evenly distribution of tasks.

available_worker

Instead of just picking one of the workers in the queue and sending the request to it, this strategy queues the request and waits until a worker is available to perform it. That may render the worker selection part of the process much slower (thus generating the need for an aditional parameter: Worker_Timeout that controls how many milliseconds is the client willing to spend in that, regardless of the global Timeout for the call). This strategy ensures that, if a worker crashes, no messages are lost in its message queue. It also ensures that, if a task takes too long, that doesn't block other tasks since, as soon as other worker is free it can pick up the next task in the list.

next_available_worker

In a way, this strategy behaves like available_worker in the sense that it will pick the first worker that it can find which is not running any task at the moment, but the difference is that it will fail if all workers are busy.

Broadcasting a Pool

Wpool provides a way to broadcast a message to every worker within the given Pool.

1> wpool:start().
ok
2> wpool:start_pool(my_pool, [{workers, 3}]).
{ok,<0.299.0>}
3> wpool:broadcast(my_pool, {io, format, ["I got a message.~n"]}).
I got a message.
I got a message.
I got a message.
ok

NOTE: This messages don't get queued, they go straight to the worker's message queues, so if you're using available_worker strategy to balance the charge and you have some tasks queued up waiting for the next available worker, the broadcast will reach all the workers before the queued up tasks.

Watching a Pool

Wpool provides a way to get live statistics about a pool. To do that, you can use wpool:stats/1.

Stopping a Pool

To stop a pool, just use wpool:stop/1.

Examples

To see how wpool is used you can check the test folder where you'll find many different scenarios excercised in the different suites.

If you want to see worker_pool in a real life project, I recommend you to check sumo_db, another open-source library from Inaka that uses wpool intensively.

Benchmarks

wpool comes with a very basic benchmarker that let's you compare different strategies against the default wpool_worker. If you want to do the same in your project, you can use wpool_bench as a template and replace the worker and the tasks by your own ones.

Contact Us

If you find any bugs or have a problem while using this library, please open an issue in this repo (or a pull request :)).

On Hex.pm

Worker Pool is available on Hex.pm.