Skip to content

Build instructions

Jump to bottom
Leo edited this page Dec 13, 2017 · 1 revision

Build instructions

The project build is now automated by using either Arduino-Makefile or platformio (your choice), you can still use Arduino IDE as well. The default build is for Arduino Mega2560, but this can be ported to other boards.

'PLEASE NOTE:' This repo contains submodules, so for the first time cloning the repo you can do it like this: 'git clone --recursive https://github.com/lcapossio/fresca.git', or if you already cloned you have to initialize the submodules: 'git submodule update --init --recursive'. Also each time you pull, you have to pull recursively, in case there is an update for the submodules: 'git pull --recurse-submodules'

Using Arduino IDE:

  • Add all the libraries under 'arduino/lib'
  • The main sketch is 'arduino/src/fresca.ino'
  • Compile and upload the sketch

Using Arduino-Makefile:

  • 'cd' to the 'arduino/src' folder
  • run 'make ARDUINO_DIR=your/arduino/install/path'

Using platformio:

  • 'cd' to the 'arduino' folder
  • run 'platformio run'

Check the 'Configuration/Pinout' section for info on customizing 'fresca'

Clone this wiki locally