How to Setup a new raspberry pi

Software Required:

1. Balena Etcher
2. Putty

Setup Raspberry pi

1. Download Raspbian from link. Normally choose Raspberry Pi OS (32-bit) with desktop and recommended software.

2. Use Balena Etcher to write image of Raspbian system which is downloaded from official website, following these step: a) choose download image file. b) choose your writing destination (your SD card). c) Write it.

Creat a new blank file named as 'ssh' without extension in the drive location of SD card.

Setup with Wifi connection

1. Insert SD card on the Raspberry Pi board. Plug in the power cable. Connect ethernet cable between raspberry pi and your host PC.

2. Open putty on host computer, type IP address raspberrypi.local to connect.

3. It will open a terminal. Type Login: pi and Password: raspberry.

4. Once you access the remote terminal, type sudo raspi-config, then in the open GUI, choose NETWORK OPTION -> Wireless LAN -> enter SSID and password.

5. type sudo ifconfig to get your wifi IP address. Something like 192.168.0.197.

6. Now you can use putty on your host computer to access the raspberry pi