nice!nano holder

This is a nice!nano holder for the lolligagger tray mount for Joshua Shreves Dactyl Manuform python port if you enable controller_mount_type = 'EXTERNAL'.

This is a work in progress, the nice!nano does not fit that well!

Printing

Print it with 0.15mm layer height on a 0.4mm nozzle with stock settings. Supports are not needed - at least on a Prusa Mini+. Don't try to pry it off the bed - wait until it is cooled down, otherwise you will rupture the single layer.

Switches

The switch used can be found here:

• https://shop.pimoroni.com/products/spdt-mini-power-switch
• https://www.melopero.com/de/Shop/Versorgung/Schalter/spdt-mini-netzschalter/