Skip to content

Commit

Permalink
update doc
Browse files Browse the repository at this point in the history
  • Loading branch information
mathieucarbou committed Jul 9, 2024
1 parent 9da1fe2 commit 80e7c6e
Show file tree
Hide file tree
Showing 2 changed files with 2 additions and 6 deletions.
2 changes: 1 addition & 1 deletion docs/index.md
Original file line number Diff line number Diff line change
Expand Up @@ -251,7 +251,7 @@ The money helps funding the hardware necessary to test and develop the firmware.
This project was inspired by the following awesome Solar Router projects:

- [Routeur Solaire Apper](https://ota.apper-solaire.org) (Cyril P., _[xlyric](https://github.com/xlyric)_)
- [Routeur Solaire offgrid Réseautonome](https://github.com/SeByDocKy/routeur_solaire) (Sébastien P., _[SeByDocKy](https://github.com/SeByDocKy)_)
- [Routeur Solaire PVbrain](https://github.com/SeByDocKy/pvbrain2) (Sébastien P., _[SeByDocKy](https://github.com/SeByDocKy)_)
- [Routeur Solaire MK2 PV Router](https://www.mk2pvrouter.co.uk) (Robin Emley)
- [Routeur Solaire Mk2 PV Router](https://github.com/FredM67/Mk2PVRouter) (Frédéric M.)
- [Routeur Solaire Tignous](https://forum-photovoltaique.fr/viewtopic.php?f=110&t=40512) (Tignous)
Expand Down
6 changes: 1 addition & 5 deletions docs/manual.md
Original file line number Diff line number Diff line change
Expand Up @@ -47,7 +47,7 @@ When everything is wired and installed properly, you can:
1. Flash the downloaded firmware (see [Initial Firmware Installation](#initial-firmware-installation))
2. Power on the system to start the application
3. Connect to the WiFI: `YaSolR-xxxxxx`
4. Connected to the Captive Portal to setup your WiFi (see: [Captive Portal (Access Point) and WiFi](#captive-portal-access-point-and-wifi))
4. Connect to the Captive Portal to setup your WiFi (see: [Captive Portal (Access Point) and WiFi](#captive-portal-access-point-and-wifi))
5. Go to the [Dashboard / GPIO](#dashboard--gpio) page to verify your GPIOs.
6. Go to the [Dashboard / Hardware](#dashboard--hardware) page to activate the hardware you have
7. Go to the [Dashboard / Hardware Config](#dashboard--hardware-config) page to configure your hardware settings and resistance values if needed.
Expand Down Expand Up @@ -660,7 +660,3 @@ So the router will take whatever is not used by the EV box.
- **GitHub Discussions**: [https://github.com/mathieucarbou/YaSolR-OSS/discussions](https://github.com/mathieucarbou/YaSolR-OSS/discussions)

- **GitHub Issues**: [https://github.com/mathieucarbou/YaSolR-OSS/issues](https://github.com/mathieucarbou/YaSolR-OSS/issues)

```

```

0 comments on commit 80e7c6e

Please sign in to comment.