Added photos

docs/blog/2024-07-01_shelly_solar_diverter.md

@@ -86,7 +86,7 @@ Some additional hardware are required depending on the installation.
 
 First the easy part: the temperature sensor and the Shelly Add-On, which has to be put behind the Shelly Dimmer.
 
-![](/assets/img/hardware/Shelly_Addon_DS18.jpeg)
+| [![](/assets/img/hardware/Shelly_Addon_DS18.jpeg)](/assets/img/hardware/Shelly_Addon_DS18.jpeg) | [![](/assets/img/hardware/shelly_dimmer_with_addon.jpeg)](/assets/img/hardware/shelly_dimmer_with_addon.jpeg) |
 
 ### Electric Circuit
 
@@ -337,9 +337,10 @@ Here is a PoC box I am using for my testing with all the components wired.
 
 The Shelly Dimmer Gen 3 with the Shelly Addon are in the black enclosure, the voltage regulator on the right and the Shelly EM Pro at the top right.
 
-In this PoC, I have used the LCTC voltage regulator which comes already pre-mounted on a heat sink, but I encourage you to use the LSA instead (which I also have). The LSA is better at detected lower DC voltage so the dimmer resolution will be increased.
+In this PoC on the left, I have used the LCTC voltage regulator which comes already pre-mounted on a heat sink, but I encourage you to use the LSA instead (which I also have).
+The LSA is better at detected lower DC voltage so the dimmer resolution will be increased.
 
-![](/assets/img/hardware/shelly_solar_diverter_poc.jpeg)
+| [![](/assets/img/hardware/shelly_solar_diverter_poc.jpeg)](/assets/img/hardware/shelly_solar_diverter_poc.jpeg) | [![](/assets/img/hardware/shelly_solar_diverter_poc2.jpeg)](/assets/img/hardware/shelly_solar_diverter_poc2.jpeg) |
 
 ## Help and Support