Fix doc

docs/blog/2024-07-01_shelly_solar_diverter.md

@@ -122,7 +122,6 @@ Also, this central place allows to control the 1, 2 or more dimmers remotely.
 
 ### Shelly Dimmer Setup
 
-- Make sure the switch (input) are enabled and inverted. S1 should replicate the inverse state of the relay / contactor, so that when you activate the contactor through the Dimmer output remotely, the dimmer will deactivate itself.
 - Set static IP addresses
 - Use the min/max settings to remap the 0-100% to match the voltage regulator. In the case of the LSA and LCTC, I found that **I had to remap to 10%-80%.**