Skip to content

Commit

Permalink
Update OSS UX
Browse files Browse the repository at this point in the history 
(cherry picked from commit c96410f38195fb00a60652793cfcd5944767b2e2)
  • Loading branch information
@mathieucarbou
mathieucarbou committed Aug 1, 2024
1 parent d7934a8 commit a61af50
Show file tree
Hide file tree
Showing 5 changed files with 227 additions and 150 deletions.
14 changes: 6 additions & 8 deletions data/config.html
View file
Original file line number Diff line number Diff line change
Expand Up @@ -63,7 +63,6 @@ <h1>YaSolR Configuration</h1>
const supportedConfig = {

"Output 1 Control": "TITLE",
o1_resistance: ["Output 1 Resistance (Ohm)", "uint"],
o1_dim_limit: ["Dimmer Duty Cycle Limiter (%)", "percent"],
o1_dim_max_t: ["Dimmer Temperature Limiter (stop routing when temperature reached)", "percent"],
o1_excess_ratio: ["Grid Excess Reserved to Output 1. Output 2 will take the remaining. If 100%, Output 2 will be activated only if there is some remaining excess.", "percent"],
Expand All @@ -76,7 +75,6 @@ <h1>YaSolR Configuration</h1>
o1_temp_stop: ["Bypass Stop Temperature (C)", "uint"],

"Output 2 Control": "TITLE",
o2_resistance: ["Output 2 Resistance (Ohm)", "uint"],
o2_dim_limit: ["Dimmer Duty Cycle Limiter (%)", "percent"],
o2_dim_max_t: ["Dimmer Temperature Limiter (stop routing when temperature reached)", "percent"],
o2_excess_ratio: ["Grid Excess Reserved to Output 2. Output 2 will take the remaining after output 1. If 100%, Output 2 will try to consume 100% of the remaining.", "percent"],
Expand All @@ -88,10 +86,6 @@ <h1>YaSolR Configuration</h1>
o2_temp_start: ["Bypass Start Temperature (C)", "uint"],
o2_temp_stop: ["Bypass Stop Temperature (C)", "uint"],

"Relays": "TITLE",
relay1_load: ["Relay 1 Automatic Control: Connected Load (Watts)", "uint"],
relay2_load: ["Relay 2 Automatic Control: Connected Load (Watts)", "uint"],

"Management": "TITLE",
debug_enable: ["Enable Debug Logging", "switch"],

Expand Down Expand Up @@ -160,14 +154,18 @@ <h1>YaSolR Configuration</h1>
disp_speed: ["Display Speed (s)", "select", "1,2,3,4,5,6,7,8,9,10"],
disp_type: ["Display Type", "select", "SH1106,SH1107,SSD1306"],
disp_angle: ["Display Rotation", "select", "0,90,180,270"],
o1_relay_type: ["Output 1 Bypass Relay Type", "select", "NO,NC"],
o2_relay_type: ["Output 2 Bypass Relay Type", "select", "NO,NC"],
relay1_type: ["Relay 1 Type", "select", "NO,NC"],
relay2_type: ["Relay 2 Type", "select", "NO,NC"],
relay1_load: ["Relay 1 Automatic Control: Connected Load (Watts)", "uint"],
relay2_load: ["Relay 2 Automatic Control: Connected Load (Watts)", "uint"],
o1_relay_type: ["Output 1 Bypass Relay Type", "select", "NO,NC"],
o2_relay_type: ["Output 2 Bypass Relay Type", "select", "NO,NC"],
o1_dim_min: ["Output 1 Dimmer Remap Min (%)", "percent"],
o1_dim_max: ["Output 1 Dimmer Remap Max (%)", "percent"],
o2_dim_min: ["Output 2 Dimmer Remap Min (%)", "percent"],
o2_dim_max: ["Output 2 Dimmer Remap Max (%)", "percent"],
o1_resistance: ["Output 1 Resistance (Ohm)", "uint"],
o2_resistance: ["Output 2 Resistance (Ohm)", "uint"],

"PID Calibration": "TITLE",
pid_view_enable: ["View PID Data", "switch"],
Expand Down
33 changes: 27 additions & 6 deletions include/YaSolRWebsite.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -50,6 +50,8 @@ namespace YaSolR {
Statistic _gridEnergyReturned = Statistic(&dashboard, YASOLR_LBL_017);
Statistic _gridFrequency = Statistic(&dashboard, YASOLR_LBL_018);

Statistic _udpMessageRateBuffer = Statistic(&dashboard, YASOLR_LBL_157);

Statistic _networkHostname = Statistic(&dashboard, YASOLR_LBL_019);
Statistic _networkInterface = Statistic(&dashboard, YASOLR_LBL_020);
Statistic _networkAPIP = Statistic(&dashboard, YASOLR_LBL_021);
Expand All @@ -67,8 +69,6 @@ namespace YaSolR {
Statistic _relay1SwitchCount = Statistic(&dashboard, YASOLR_LBL_032);
Statistic _relay2SwitchCount = Statistic(&dashboard, YASOLR_LBL_033);

Statistic _udpMessageRateBuffer = Statistic(&dashboard, YASOLR_LBL_157);

Statistic _zcdPulseLength = Statistic(&dashboard, YASOLR_LBL_187);
Statistic _zcdPulsePeriod = Statistic(&dashboard, YASOLR_LBL_185);

Expand All @@ -79,6 +79,7 @@ namespace YaSolR {
#endif

// home

Card _routerPower = Card(&dashboard, ENERGY_CARD, YASOLR_LBL_036, "W");
Card _routerApparentPower = Card(&dashboard, ENERGY_CARD, YASOLR_LBL_037, "VA");
Card _routerPowerFactor = Card(&dashboard, ENERGY_CARD, YASOLR_LBL_038);
Expand All @@ -89,6 +90,20 @@ namespace YaSolR {
Card _routerEnergy = Card(&dashboard, ENERGY_CARD, YASOLR_LBL_043, "kWh");
Card _gridPower = Card(&dashboard, ENERGY_CARD, YASOLR_LBL_044, "W");
Card _routerDS18State = Card(&dashboard, TEMPERATURE_CARD, YASOLR_LBL_045, "°C");
#ifdef APP_MODEL_OSS
Card _relay1Switch = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_073);
Card _relay2Switch = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_076);

Card _output1State = Card(&dashboard, STATUS_CARD, YASOLR_LBL_046, DASH_STATUS_IDLE);
Card _output1DS18State = Card(&dashboard, TEMPERATURE_CARD, YASOLR_LBL_046 ": " YASOLR_LBL_048, "°C");
Card _output1DimmerSlider = Card(&dashboard, SLIDER_CARD, YASOLR_LBL_046 ": " YASOLR_LBL_050, "%", 0.0f, 100.0f, 0.01f);
Card _output1Bypass = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_046 ": " YASOLR_LBL_051);

Card _output2State = Card(&dashboard, STATUS_CARD, YASOLR_LBL_070, DASH_STATUS_IDLE);
Card _output2DS18State = Card(&dashboard, TEMPERATURE_CARD, YASOLR_LBL_070 ": " YASOLR_LBL_048, "°C");
Card _output2DimmerSlider = Card(&dashboard, SLIDER_CARD, YASOLR_LBL_070 ": " YASOLR_LBL_050, "%", 0.0f, 100.0f, 0.01f);
Card _output2Bypass = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_070 ": " YASOLR_LBL_051);
#endif

int _gridPowerHistoryY[YASOLR_GRAPH_POINTS] = {0};
int _routedPowerHistoryY[YASOLR_GRAPH_POINTS] = {0};
Expand All @@ -97,6 +112,12 @@ namespace YaSolR {
Chart _routedPowerHistory = Chart(&dashboard, AREA_CHART, YASOLR_LBL_036 " (W)");
Chart _routerTHDiHistory = Chart(&dashboard, BAR_CHART, YASOLR_LBL_039 " (%)");

#ifdef APP_MODEL_OSS
Card _output1PZEMSync = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_147);
Card _output2PZEMSync = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_148);
Card _resistanceCalibration = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_186);
#endif

#ifdef APP_MODEL_PRO
// tabs icons:
// https://en.wikipedia.org/wiki/List_of_Unicode_characters#Miscellaneous_Symbols
Expand All @@ -105,7 +126,7 @@ namespace YaSolR {
Tab _output1Tab = Tab(&dashboard, "\u2600 " YASOLR_LBL_046);
Card _output1State = Card(&dashboard, STATUS_CARD, YASOLR_LBL_047, DASH_STATUS_IDLE);
Card _output1DS18State = Card(&dashboard, TEMPERATURE_CARD, YASOLR_LBL_048, "°C");
Card _output1DimmerSlider = Card(&dashboard, SLIDER_CARD, YASOLR_LBL_049, "%", 0.0f, 100.0f, 0.01f);
Card _output1DimmerSlider = Card(&dashboard, SLIDER_CARD, YASOLR_LBL_050, "%", 0.0f, 100.0f, 0.01f);
Card _output1DimmerSliderRO = Card(&dashboard, PROGRESS_CARD, YASOLR_LBL_050, "%", 0.0f, 100.0f, 0.01f);
Card _output1Bypass = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_051);
Card _output1BypassRO = Card(&dashboard, STATUS_CARD, YASOLR_LBL_051);
Expand All @@ -131,7 +152,7 @@ namespace YaSolR {
Tab _output2Tab = Tab(&dashboard, "\u2600 " YASOLR_LBL_070);
Card _output2State = Card(&dashboard, STATUS_CARD, YASOLR_LBL_047, DASH_STATUS_IDLE);
Card _output2DS18State = Card(&dashboard, TEMPERATURE_CARD, YASOLR_LBL_048, "°C");
Card _output2DimmerSlider = Card(&dashboard, SLIDER_CARD, YASOLR_LBL_049, "%", 0.0f, 100.0f, 0.01f);
Card _output2DimmerSlider = Card(&dashboard, SLIDER_CARD, YASOLR_LBL_050, "%", 0.0f, 100.0f, 0.01f);
Card _output2DimmerSliderRO = Card(&dashboard, PROGRESS_CARD, YASOLR_LBL_050, "%", 0.0f, 100.0f, 0.01f);
Card _output2Bypass = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_051);
Card _output2BypassRO = Card(&dashboard, STATUS_CARD, YASOLR_LBL_051);
Expand Down Expand Up @@ -242,14 +263,14 @@ namespace YaSolR {
Card _displayRotation = Card(&dashboard, DROPDOWN_CARD, YASOLR_LBL_144);
Card _relay1Type = Card(&dashboard, DROPDOWN_CARD, YASOLR_LBL_151);
Card _relay2Type = Card(&dashboard, DROPDOWN_CARD, YASOLR_LBL_152);
Card _relay1Load = Card(&dashboard, TEXT_INPUT_CARD, YASOLR_LBL_072);
Card _relay2Load = Card(&dashboard, TEXT_INPUT_CARD, YASOLR_LBL_075);
Card _output1RelayType = Card(&dashboard, DROPDOWN_CARD, YASOLR_LBL_149);
Card _output2RelayType = Card(&dashboard, DROPDOWN_CARD, YASOLR_LBL_150);
Card _output1DimmerMapper = Card(&dashboard, RANGE_SLIDER_CARD, YASOLR_LBL_183, "%", 0, 100, 1);
Card _output2DimmerMapper = Card(&dashboard, RANGE_SLIDER_CARD, YASOLR_LBL_184, "%", 0, 100, 1);
Card _output1PZEMSync = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_147);
Card _output2PZEMSync = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_148);
Card _relay1Load = Card(&dashboard, TEXT_INPUT_CARD, YASOLR_LBL_072);
Card _relay2Load = Card(&dashboard, TEXT_INPUT_CARD, YASOLR_LBL_075);
Card _output1ResistanceInput = Card(&dashboard, TEXT_INPUT_CARD, YASOLR_LBL_145);
Card _output2ResistanceInput = Card(&dashboard, TEXT_INPUT_CARD, YASOLR_LBL_146);
Card _resistanceCalibration = Card(&dashboard, BUTTON_CARD, YASOLR_LBL_186);
Expand Down
102 changes: 51 additions & 51 deletions include/i18n/en.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -33,10 +33,6 @@
#define YASOLR_LBL_027 "Network: WiFi SSID"
#define YASOLR_LBL_028 "Network: WiFi RSSI"
#define YASOLR_LBL_029 "Network: WiFi Signal"
#define YASOLR_LBL_030 "Relay: Output 1 Bypass Relay Switch Count"
#define YASOLR_LBL_031 "Relay: Output 2 Bypass Relay Switch Count"
#define YASOLR_LBL_032 "Relay: Relay 1 Switch Count"
#define YASOLR_LBL_033 "Relay: Relay 2 Switch Count"
#define YASOLR_LBL_034 "Time"
#define YASOLR_LBL_035 "Uptime"
#define YASOLR_LBL_036 "Routed Power"
Expand All @@ -48,12 +44,12 @@
#define YASOLR_LBL_042 "Router Resistance"
#define YASOLR_LBL_043 "Routed Energy"
#define YASOLR_LBL_044 "Grid Power"
#define YASOLR_LBL_045 "Router Temperature"
#define YASOLR_LBL_048 "Temperature"
#define YASOLR_LBL_045 "Router " YASOLR_LBL_048
#define YASOLR_LBL_046 "Output 1"
#define YASOLR_LBL_047 "Status"
#define YASOLR_LBL_048 "Temperature"
#define YASOLR_LBL_049 "Dimmer Duty Manual Control"
#define YASOLR_LBL_050 "Dimmer Duty"
#define YASOLR_LBL_050 "Dimmer"
#define YASOLR_LBL_049
#define YASOLR_LBL_051 "Bypass"
#define YASOLR_LBL_052 "Power"
#define YASOLR_LBL_053 "Apparent Power"
Expand All @@ -63,24 +59,24 @@
#define YASOLR_LBL_057 "Current"
#define YASOLR_LBL_058 "Resistance"
#define YASOLR_LBL_059 "Energy"
#define YASOLR_LBL_060 "Dimmer Automatic Control"
#define YASOLR_LBL_060 YASOLR_LBL_050 " Automatic Control"
#define YASOLR_LBL_061 "Grid Excess Reserved"
#define YASOLR_LBL_062 "Dimmer Duty Limiter"
#define YASOLR_LBL_063 "Dimmer Temperature Limiter"
#define YASOLR_LBL_062 YASOLR_LBL_050 " Limiter"
#define YASOLR_LBL_063 YASOLR_LBL_050 " " YASOLR_LBL_048 " Limiter"
#define YASOLR_LBL_064 "Bypass Automatic Control"
#define YASOLR_LBL_065 "Bypass Start Temperature"
#define YASOLR_LBL_066 "Bypass Stop Temperature"
#define YASOLR_LBL_065 "Bypass Start " YASOLR_LBL_048
#define YASOLR_LBL_066 "Bypass Stop " YASOLR_LBL_048
#define YASOLR_LBL_067 "Bypass Start Time"
#define YASOLR_LBL_068 "Bypass Stop Time"
#define YASOLR_LBL_069 "Bypass Week Days"
#define YASOLR_LBL_070 "Output 2"
#define YASOLR_LBL_071 "Relays"
#define YASOLR_LBL_072 "Relay 1 Automatic Control: Connected Load (Watts)"
#define YASOLR_LBL_073 "Relay 1 Manual Control"
#define YASOLR_LBL_074 "Relay 1"
#define YASOLR_LBL_075 "Relay 2 Automatic Control: Connected Load (Watts)"
#define YASOLR_LBL_076 "Relay 2 Manual Control"
#define YASOLR_LBL_072 YASOLR_LBL_074 " Automatic Control: Connected Load (Watts)"
#define YASOLR_LBL_073 YASOLR_LBL_074 " Manual Control"
#define YASOLR_LBL_077 "Relay 2"
#define YASOLR_LBL_075 YASOLR_LBL_077 " Automatic Control: Connected Load (Watts)"
#define YASOLR_LBL_076 YASOLR_LBL_077 " Manual Control"
#define YASOLR_LBL_078 "Management"
#define YASOLR_LBL_079 "Configuration Backup"
#define YASOLR_LBL_080 "Configuration Restore"
Expand Down Expand Up @@ -114,13 +110,15 @@
#define YASOLR_LBL_108 "GPIO"
#define YASOLR_LBL_109 "Unknown"
#define YASOLR_LBL_110 "No electricity"
#define YASOLR_LBL_111 "Display SCL (CLOCK)"
#define YASOLR_LBL_112 "Display SDA (DATA)"
#define YASOLR_LBL_127 "Display"
#define YASOLR_LBL_111 YASOLR_LBL_127 " SCL (CLOCK)"
#define YASOLR_LBL_112 YASOLR_LBL_127 " SDA (DATA)"
#define YASOLR_LBL_113 "Disconnected"
#define YASOLR_LBL_114 "Read error"
#define YASOLR_LBL_115 "Disabled"
#define YASOLR_LBL_116 "JSY (TX) Serial RX"
#define YASOLR_LBL_117 "JSY (RX) Serial TX"
#define YASOLR_LBL_128 "JSY"
#define YASOLR_LBL_116 YASOLR_LBL_128 " (TX) Serial RX"
#define YASOLR_LBL_117 YASOLR_LBL_128 " (RX) Serial TX"
#define YASOLR_LBL_118 "LED Green"
#define YASOLR_LBL_119 "LED Red"
#define YASOLR_LBL_120 "LED Yellow"
Expand All @@ -130,37 +128,35 @@
#define YASOLR_LBL_124 "Not started"
#define YASOLR_LBL_125 "Zero-Cross Detection"
#define YASOLR_LBL_126 "Hardware"
#define YASOLR_LBL_127 "Display"
#define YASOLR_LBL_128 "JSY"
#define YASOLR_LBL_129 "LEDs"
#define YASOLR_LBL_130 "Enabled"
#define YASOLR_LBL_131 "Output 1 Dimmer"
#define YASOLR_LBL_132 "Output 1 DS18"
#define YASOLR_LBL_133 "Output 1 PZEM"
#define YASOLR_LBL_134 "Output 1 Relay (Bypass)"
#define YASOLR_LBL_135 "Output 2 Dimmer"
#define YASOLR_LBL_136 "Output 2 DS18"
#define YASOLR_LBL_137 "Output 2 PZEM"
#define YASOLR_LBL_138 "Output 2 Relay (Bypass)"
#define YASOLR_LBL_131 YASOLR_LBL_046 " Dimmer"
#define YASOLR_LBL_132 YASOLR_LBL_046 " DS18"
#define YASOLR_LBL_133 YASOLR_LBL_046 " PZEM"
#define YASOLR_LBL_134 YASOLR_LBL_046 " Relay (Bypass)"
#define YASOLR_LBL_135 YASOLR_LBL_070 " Dimmer"
#define YASOLR_LBL_136 YASOLR_LBL_070 " DS18"
#define YASOLR_LBL_137 YASOLR_LBL_070 " PZEM"
#define YASOLR_LBL_138 YASOLR_LBL_070 " Relay (Bypass)"
#define YASOLR_LBL_139 "Router DS18"
#define YASOLR_LBL_140 "Hardware Config"
#define YASOLR_LBL_140 YASOLR_LBL_126 " Config"
#define YASOLR_LBL_141 "Nominal Grid Frequency"
#define YASOLR_LBL_142 "Display Speed"
#define YASOLR_LBL_143 "Display Type"
#define YASOLR_LBL_144 "Display Rotation"
#define YASOLR_LBL_145 "Output 1 Resistance (Ω)"
#define YASOLR_LBL_146 "Output 2 Resistance (Ω)"
#define YASOLR_LBL_147 "Output 1 PZEM Pairing"
#define YASOLR_LBL_148 "Output 2 PZEM Pairing"
#define YASOLR_LBL_149 "Output 1 Relay Type (Bypass)"
#define YASOLR_LBL_150 "Output 2 Relay Type (Bypass)"
#define YASOLR_LBL_151 "Relay 1 Type"
#define YASOLR_LBL_152 "Relay 2 Type"
#define YASOLR_LBL_142 YASOLR_LBL_127 " Speed"
#define YASOLR_LBL_143 YASOLR_LBL_127 " Type"
#define YASOLR_LBL_144 YASOLR_LBL_127 " Rotation"
#define YASOLR_LBL_145 YASOLR_LBL_046 " Resistance (Ω)"
#define YASOLR_LBL_146 YASOLR_LBL_070 " Resistance (Ω)"
#define YASOLR_LBL_147 YASOLR_LBL_046 " PZEM Pairing"
#define YASOLR_LBL_148 YASOLR_LBL_070 " PZEM Pairing"
#define YASOLR_LBL_149 YASOLR_LBL_046 " Relay Type (Bypass)"
#define YASOLR_LBL_150 YASOLR_LBL_070 " Relay Type (Bypass)"
#define YASOLR_LBL_151 YASOLR_LBL_074 " Type"
#define YASOLR_LBL_152 YASOLR_LBL_077 " Type"
#define YASOLR_LBL_153 "Duplicate"
#define YASOLR_LBL_154 "Invalid"
#define YASOLR_LBL_155 "Input Only"
#define YASOLR_LBL_156 "I/O"
#define YASOLR_LBL_157 "JSY Remote UDP: Message Rate"
#define YASOLR_LBL_157 YASOLR_LBL_128 " Remote UDP: Message Rate"
#define YASOLR_LBL_158 "Grid Excess Remaining"
#define YASOLR_LBL_159 "PID Controller"
#define YASOLR_LBL_160 "Proportional Mode"
Expand All @@ -181,16 +177,20 @@
#define YASOLR_LBL_175 "I Term (W)"
#define YASOLR_LBL_176 "D Term (W)"
#define YASOLR_LBL_177 "Chart Reset"
#define YASOLR_LBL_178 "Debug Information"
#define YASOLR_LBL_178 YASOLR_LBL_083 "Debug Information"
#define YASOLR_LBL_179 "ZCD Disabled"
#define YASOLR_LBL_180 "Not paired"
#define YASOLR_LBL_181 "Output 1 Temperature MQTT Topic"
#define YASOLR_LBL_182 "Output 2 Temperature MQTT Topic"
#define YASOLR_LBL_183 "Output 1 Dimmer Min/Max Remapping"
#define YASOLR_LBL_184 "Output 2 Dimmer Min/Max Remapping"
#define YASOLR_LBL_185 "ZCD: Pulse Period"
#define YASOLR_LBL_181 YASOLR_LBL_046 " " YASOLR_LBL_048 " MQTT Topic"
#define YASOLR_LBL_182 YASOLR_LBL_070 " " YASOLR_LBL_048 " MQTT Topic"
#define YASOLR_LBL_183 YASOLR_LBL_046 " Dimmer Min/Max Remapping"
#define YASOLR_LBL_184 YASOLR_LBL_070 " Dimmer Min/Max Remapping"
#define YASOLR_LBL_185 "ZCD: Measured Pulse Period"
#define YASOLR_LBL_186 "Resistance Value Detection"
#define YASOLR_LBL_187 "ZCD: Pulse Length"
#define YASOLR_LBL_187 "ZCD: Measured Pulse Length"
#define YASOLR_LBL_030 "Relay: " YASOLR_LBL_046 " Bypass Relay Switch Count"
#define YASOLR_LBL_031 "Relay: " YASOLR_LBL_070 " Bypass Relay Switch Count"
#define YASOLR_LBL_032 "Relay: " YASOLR_LBL_074 " Switch Count"
#define YASOLR_LBL_033 "Relay: " YASOLR_LBL_077 " Switch Count"
#define YASOLR_LBL_188
#define YASOLR_LBL_189
#define YASOLR_LBL_190
Expand Down
8 changes: 4 additions & 4 deletions include/i18n/fr.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -52,8 +52,8 @@
#define YASOLR_LBL_046 "Sortie 1"
#define YASOLR_LBL_047 "État"
#define YASOLR_LBL_048 "Température"
#define YASOLR_LBL_049 "Contrôle manuel du routage"
#define YASOLR_LBL_050 "Niveau du routage"
#define YASOLR_LBL_049
#define YASOLR_LBL_050 "variateur"
#define YASOLR_LBL_051 "Marche forcée"
#define YASOLR_LBL_052 "Puissance"
#define YASOLR_LBL_053 "Puissance Apparente"
Expand Down Expand Up @@ -188,9 +188,9 @@
#define YASOLR_LBL_182 "Topic MQTT pour la température sortie 2"
#define YASOLR_LBL_183 "Redéfinition Min/Max Variateur Sortie 1"
#define YASOLR_LBL_184 "Redéfinition Min/Max Variateur Sortie 2"
#define YASOLR_LBL_185 "ZCD: Période des pulses"
#define YASOLR_LBL_185 "ZCD: Période mesurée des pulses"
#define YASOLR_LBL_186 "Détection valeur résistances"
#define YASOLR_LBL_187 "ZCD: Longueur des pulses"
#define YASOLR_LBL_187 "ZCD: Longueur mesurée des pulses"
#define YASOLR_LBL_188
#define YASOLR_LBL_189
#define YASOLR_LBL_190
Expand Down
Loading

0 comments on commit a61af50

Please sign in to comment.