This project uses the headphone output of a pair of Walkie-Talkies to trigger a DSLR camera (in this example NIKON D500
through a DC0
cable).
- Camera
- DC0 cable (cable to the camera)
- 1/4 Jack extender (to avoid cuting your DC0)
- Arduino
- Walkie-Talkies
- Cables
- Breadboard or a prototype board
- Battery
- Switch
- Case
- Upload the sketch provided in
/code
folder to your Arduino. - Connect the ground of your camera and walkie-talkie cable to the ground
GND
pin of the Arduino - Make the
tip
andring
of your camera cable touch toguether. - Connect the
tip
of the walkie to the inputA0
pin of the Arduino. - Connect the digital
2
pin to the union of the ring and tip of the camera.