Skip to content
This repository was archived by the owner on Apr 19, 2023. It is now read-only.

Milestones

List view

  • batch flow / ignition logic

    Philipines device has lower flow, so doesn't make sense to try to achieve constant flow; instead: * Pinch valve lets 8 L in * Heat to 60 (HTR) * Hold for 30 min * Repeat at prescribed interval

    Due by October 23, 2017
    0% complete0 open0 closed

  • ignitor thermistor

    replace the 15 min re-light window with a temperature-based check

    Due by August 31, 2017
    •4/4 issues closed
    100% complete0 open4 closed

  • controlled batch flow

    change the logic to use controlled batch flow

    No due date
    •2/2 issues closed
    100% complete0 open2 closed

  • SD Card

    Implement SD card data saving functionality for sites that lack cellular connectivity.

    Due by August 31, 2017
    •16/16 issues closed
    100% complete0 open16 closed

  • Pinch Valve

    Integrate the pinch valve stepper motor controller into both the software and hardware.

    Due by June 9, 2017
    •11/11 issues closed
    100% complete0 open11 closed

  • Bucket Tip Support

    No due date
    •7/7 issues closed
    100% complete0 open7 closed

  • schema-changes

    No due date
    •5/5 issues closed
    100% complete0 open5 closed

  • React Migration

    No due date
    •5/5 issues closed
    100% complete0 open5 closed

  • Logging

    Utilize the new Logging class (https://prerelease-docs.particle.io/reference/firmware/photon/#logging) in firmware >=0.6.0 to capture error/warn/info content.

    No due date
    •6/6 issues closed
    100% complete0 open6 closed

  • MCU software

    No due date
    •20/20 issues closed
    100% complete0 open20 closed

  • hardware

    No due date
    •12/13 issues closed
    92% complete1 open12 closed

  • particle migration

    migrate working Arduino Uno code to spark.io particle

    Due by March 31, 2016
    •3/3 issues closed
    100% complete0 open3 closed

  • transducer classes

    The most robust implementation of this would be to move all of the reading and action transducer variables and functions to classes. I'll let Aaron validate functionality first, and then we can migrate all of this. Classes would include: * TempProbe * Ignitor / Valve * Pump * SD card

    No due date
    •6/6 issues closed
    100% complete0 open6 closed