arm64: dts: qcom: msm8939-longcheer-l9100: add VCM for rear camera

Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml

@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9719 Voice Coil Motor (VCM) Controller
+
+maintainers:
+  - André Apitzsch <[email protected]>
+
+description:
+  The Dongwoon DW9718S/9719/9761 is a single 10-bit digital-to-analog converter
+  with 100 mA output current sink capability, designed for linear control of
+  voice coil motors (VCM) in camera lenses. This chip provides a Smart Actuator
+  Control (SAC) mode intended for driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    enum:
+      - dongwoon,dw9718s
+      - dongwoon,dw9719
+      - dongwoon,dw9761
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD power supply
+
+  dongwoon,sac-mode:
+    description: |
+      Slew Rate Control mode to use: direct, LSC (Linear Slope Control) or
+      SAC1-SAC6 (Smart Actuator Control).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0   # Direct mode
+      - 1   # LSC mode
+      - 2   # SAC1 mode (operation time# 0.32 x Tvib)
+      - 3   # SAC2 mode (operation time# 0.48 x Tvib)
+      - 4   # SAC3 mode (operation time# 0.72 x Tvib)
+      - 5   # SAC4 mode (operation time# 1.20 x Tvib)
+      - 6   # SAC5 mode (operation time# 1.64 x Tvib)
+      - 7   # SAC6 mode (operation time# 1.88 x Tvib)
+    default: 4
+
+  dongwoon,vcm-prescale:
+    description:
+      Indication of VCM switching frequency dividing rate select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: dongwoon,dw9718s
+    then:
+      properties:
+        dongwoon,vcm-prescale:
+          description:
+            The final frequency is 10 MHz divided by (value + 2).
+          maximum: 15
+          default: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        actuator@c {
+            compatible = "dongwoon,dw9718s";
+            reg = <0x0c>;
+
+            vdd-supply = <&pm8937_l17>;
+
+            dongwoon,sac-mode = <4>;
+            dongwoon,vcm-prescale = <0>;
+        };
+    };

Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml

@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Vincent Knecht <[email protected]>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8939-camss
+
+  reg:
+    maxItems: 11
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: csi_clk_mux
+      - const: vfe0
+      - const: csid2
+      - const: vfe0_vbif
+
+  clocks:
+    maxItems: 24
+
+  clock-names:
+    items:
+      - const: top_ahb
+      - const: ispif_ahb
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: ahb
+      - const: vfe0
+      - const: csi_vfe0
+      - const: vfe_ahb
+      - const: vfe_axi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+
+  interrupts:
+    maxItems: 7
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: vfe0
+      - const: csid2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: VFE GDSC - Video Front End, Global Distributed Switch
+          Controller.
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as 1.2V analog power supply.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - vdda-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8939.h>
+
+    isp@1b0ac00 {
+        compatible = "qcom,msm8939-camss";
+
+        reg = <0x01b0ac00 0x200>,
+              <0x01b00030 0x4>,
+              <0x01b0b000 0x200>,
+              <0x01b00038 0x4>,
+              <0x01b08000 0x100>,
+              <0x01b08400 0x100>,
+              <0x01b0a000 0x500>,
+              <0x01b00020 0x10>,
+              <0x01b10000 0x1000>,
+              <0x01b08800 0x100>,
+              <0x01b40000 0x200>;
+
+        reg-names = "csiphy0",
+                    "csiphy0_clk_mux",
+                    "csiphy1",
+                    "csiphy1_clk_mux",
+                    "csid0",
+                    "csid1",
+                    "ispif",
+                    "csi_clk_mux",
+                    "vfe0",
+                    "csid2",
+                    "vfe0_vbif";
+
+        clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+                 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+                 <&gcc GCC_CAMSS_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE_AXI_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI2RDI_CLK>;
+
+        clock-names = "top_ahb",
+                      "ispif_ahb",
+                      "csiphy0_timer",
+                      "csiphy1_timer",
+                      "csi0_ahb",
+                      "csi0",
+                      "csi0_phy",
+                      "csi0_pix",
+                      "csi0_rdi",
+                      "csi1_ahb",
+                      "csi1",
+                      "csi1_phy",
+                      "csi1_pix",
+                      "csi1_rdi",
+                      "ahb",
+                      "vfe0",
+                      "csi_vfe0",
+                      "vfe_ahb",
+                      "vfe_axi",
+                      "csi2_ahb",
+                      "csi2",
+                      "csi2_phy",
+                      "csi2_pix",
+                      "csi2_rdi";
+
+        interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "csiphy0",
+                          "csiphy1",
+                          "csid0",
+                          "csid1",
+                          "ispif",
+                          "vfe0",
+                          "csid2";
+
+        iommus = <&apps_iommu 3>;
+
+        power-domains = <&gcc VFE_GDSC>;
+
+        vdda-supply = <&reg_1v2>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@1 {
+                reg = <1>;
+
+                csiphy1_ep: endpoint {
+                    data-lanes = <0 2>;
+                    remote-endpoint = <&sensor_ep>;
+                };
+            };
+        };
+    };