- CSV based configuration to replace Autoboot.bin and Au80boot.bin files.
- This can make users add a new boot mode without changes ATmega firmwares
- Refactoring with OOP aproach
- Most of source codes are shared between Z80-MBC2 and V20-MBC
- You can find pre-devined CSV files in the 'contents/SD-S220718-R240620-v1' directory.
- You can use the original SD file - SD-S220718-R240620-v1.zip - with files in the 'contents/SD-S220718-R240620-v1' directory.
- Example - BOOTMO05.CSV
CP/M V3.0,CPMLDR.COM,0100,0100,2,0,0
| Description | Boot File | Load Addr | Boot Addr | Disk Set | IRQ Tty Rx | IRQ Sys Tick |
|---|---|---|---|---|---|---|
| CP/M V3.0 | CPMLDR.COM | 0100 | 0100 | 2 | 0 | 0 |
- Example - BOOTMO01.CSV
Z80 BASIC Ver 4.7b,BASIC47.BIN,0000,0000,-1,1,0
| Description | Boot File | Load Addr | Boot Addr | Disk Set | IRQ Tty Rx | IRQ Sys Tick |
|---|---|---|---|---|---|---|
| Z80 BASIC Ver 4.7b | BASIC47.BIN | 0000 | 0000 | -1 | 1 | 0 |
- You can find pre-devined CSV files in the 'contents/SD-S260320-R230520-v3' directory.
- You can use the original SD file - SD-S260320-R230520-v3.zip - with files in the 'contents/SD-S260320-R230520-v3'
- Example - BOOTMO02.CSV
CP/M V2.2,1,CPM22.BIN,0FF0,D1E0,0FF0,D1E0,0000,0000,0
| Description | Mode 80 | Boot File | Load Segment | Load Offset | Boot Segment | Boot Offset | ptr Boot Offset | ptr Boot Size | Diske Set |
|---|---|---|---|---|---|---|---|---|---|
| CP/M V2.2 | 1 | CPM22.BIN | 0FF0 | D1E0 | 0FF0 | D1E0 | 0000 | 0000 | 0 |
- Example - BOOTO03.CSV
CP/M-86 V1.1,0,CPM86.BIN,0000,0400,0040,2500,0000,0000,1
| Description | Mode 80 | Boot File | Load Segment | Load Offset | Boot Segment | Boot Offset | ptr Boot Offset | ptr Boot Size | Diske Set |
|---|---|---|---|---|---|---|---|---|---|
| CP/M-86 V1.1 | 0 | CPM86.BIN | 0000 | 0400 | 0040 | 2500 | 0000 | 0000 | 1 |
- Special CSV file to switch 80-mode - S170420.CSV
- ptr Boot Offset : The address storing a boot address of second stage. This MUST be matched with 'SWITCH80.BIN'.
- ptr Boot Size : The address storing a size of sencond stage. This MUST be matched with 'SWITCH80.BIN'.
- You can determine these variable after assembling S170420.asm file with '--l S170420.lst' option.
169 strAddr:
170 000000C1 0000 dw 0 ; Starting addres of the 8080 code.
171 ; The addres must be equal to SWITCH80_STRADDR (IOS)
172 ; NOTE: this word is updated dinamically at
173 ; load time by the IOS with the real value
174 binSize:
175 000000C3 0000 dw 0 ; Size in bytes of the 8080 code.
176 ; The addres must be equal to SWITCH80_STRADDR (IOS)
177 ; NOTE: this word is updated dinamically at
178 ; load time by the IOS with the real value
179 ; A 0 value means 65536 bytes (see IOS)
SWITCH-80,0,SWITCH80.BIN,0000,0000,0000,0000,00C1,00C3,-1
| Description | Mode 80 | Boot File | Load Segment | Load Offset | Boot Segment | Boot Offset | ptr Boot Offset | ptr Boot Size | Diske Set |
|---|---|---|---|---|---|---|---|---|---|
| SWITCH-80 | 0 | SWITCH80.BIN | 0000 | 0000 | 0000 | 0000 | 00C1 | 00C3 | -1 |
- .BIN files under '8080' director of 'SD-S260320-R230520-v3.zip' can also suported throuch CSV files but, the file name should be changed and copied to the root directory.
| Original | Modified |
|---|---|
| AltairBasic8k_v4.bin | ABASIC8K.BIN |
| basic8k78.bin | BASIC878.BIN |
| basic8k_IMSAI.bin | BASIC8IM.BIN |
| figforth130.bin | FORTH13.BIN |
| mon85-v12-ncb85.bin | MON85V12.BIN |
| tinybasic-2.0.bin | TINYBSIC.BIN |
- 'BOOTMO12.CSV' has same configurations as 'BOOTMO03.CSV' except a 'Boot File'. In this configuration, 'CPM8680.BIN' is used which can be found https://github.com/binaryspider/v20-mbc_cpm8680_cbios.
