Skip to content

Commit

Permalink
Switch ActiveMQ from classic to artemis
Browse files Browse the repository at this point in the history
  • Loading branch information
@rosswhitfield
rosswhitfield committed Nov 19, 2024
1 parent 4d750fe commit 9b0e7a2
Show file tree
Hide file tree
Showing 12 changed files with 424 additions and 195 deletions.
8 changes: 4 additions & 4 deletions .env
View file
Original file line number Diff line number Diff line change
Expand Up @@ -13,10 +13,10 @@ WORKFLOW_USER=wkflowmgr
WORKFLOW_PASS=wkflowmgr
WORKER_USER=worker
WORKER_PASS=worker
ACTIVEMQ_ADMIN_USER=admin
ACTIVEMQ_ADMIN_PASS=admin
ACTIVEMQ_QUEUE_QUERY_URL="http://activemq:8161/api/jolokia/read/org.apache.activemq:type=Broker,brokerName=localhost,destinationType=Queue,destinationName={queue}/QueueSize"
ACTIVEMQ_REDUCTION_QUEUES=["CATALOG.ONCAT.DATA_READY", "REDUCTION.DATA_READY", "REDUCTION.HIMEM.DATA_READY", "REDUCTION_CATALOG.DATA_READY"]
AMQ_USER=artemis
AMQ_PASSWORD=artemis
AMQ_QUEUE_QUERY_URL="http://activemq:8161/console/jolokia/read/org.apache.activemq.artemis:broker=%22Artemis-Broker%22,address=%22{queue}%22,component=addresses/MessageCount"
AMQ_REDUCTION_QUEUES=["CATALOG.ONCAT.DATA_READY", "REDUCTION.DATA_READY", "REDUCTION.HIMEM.DATA_READY", "REDUCTION_CATALOG.DATA_READY"]


AMQ_BROKER=[["activemq", 61613]]
Expand Down
20 changes: 20 additions & 0 deletions config/artemis/artemis-roles.properties
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,20 @@
## ---------------------------------------------------------------------------
## Licensed to the Apache Software Foundation (ASF) under one or more
## contributor license agreements. See the NOTICE file distributed with
## this work for additional information regarding copyright ownership.
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License. You may obtain a copy of the License at
##
## http://www.apache.org/licenses/LICENSE-2.0
##
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
## ---------------------------------------------------------------------------

amq = artemis,icat,user,username,wkflowmgr
view = artemis,icat,user,username,wkflowmgr
update = artemis,icat,user,username,wkflowmgr
23 changes: 23 additions & 0 deletions config/artemis/artemis-users.properties
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,23 @@
## ---------------------------------------------------------------------------
## Licensed to the Apache Software Foundation (ASF) under one or more
## contributor license agreements. See the NOTICE file distributed with
## this work for additional information regarding copyright ownership.
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License. You may obtain a copy of the License at
##
## http://www.apache.org/licenses/LICENSE-2.0
##
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
## ---------------------------------------------------------------------------

artemis = ENC(1024:520D0FDC605E6F707FDE66B5DBFD5C314FA2D9A1EC3F8A3DD9955A26E7953742:0A28714B470DEA15664221B67B0587004DA34CA8541DC15CCB5C454BB90CC3CC6E47962F29C2F51AF59AF90F996A62515748B7C8C2BA74CC5C9AA4726C3581D5)
icat = icat
system = manager
user = password
username = worker
wkflowmgr = wkflowmgr
280 changes: 280 additions & 0 deletions config/artemis/broker.xml
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,280 @@
<?xml version='1.0'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->

<configuration xmlns="urn:activemq"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xi="http://www.w3.org/2001/XInclude"
xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd">

<core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:activemq:core ">

<name>Artemis-Broker</name>


<persistence-enabled>true</persistence-enabled>

<!-- It is recommended to keep this value as 1, maximizing the number of records stored about redeliveries.
However if you must preserve state of individual redeliveries, you may increase this value or set it to -1 (infinite). -->
<max-redelivery-records>1</max-redelivery-records>

<!-- this could be ASYNCIO, MAPPED, NIO
ASYNCIO: Linux Libaio
MAPPED: mmap files
NIO: Plain Java Files
-->
<journal-type>ASYNCIO</journal-type>

<paging-directory>data/paging</paging-directory>

<bindings-directory>data/bindings</bindings-directory>

<journal-directory>data/journal</journal-directory>

<large-messages-directory>data/large-messages</large-messages-directory>


<!-- if you want to retain your journal uncomment this following configuration.
This will allow your system to keep 7 days of your data, up to 10G. Tweak it accordingly to your use case and capacity.
it is recommended to use a separate storage unit from the journal for performance considerations.
<journal-retention-directory period="7" unit="DAYS" storage-limit="10G">data/retention</journal-retention-directory>
You can also enable retention by using the argument journal-retention on the `artemis create` command -->



<journal-datasync>true</journal-datasync>

<journal-min-files>2</journal-min-files>

<journal-pool-files>10</journal-pool-files>

<journal-device-block-size>4096</journal-device-block-size>

<journal-file-size>10M</journal-file-size>

<!--
This value was determined through a calculation.
Your system could perform 22.73 writes per millisecond
on the current journal configuration.
That translates as a sync write every 44000 nanoseconds.
Note: If you specify 0 the system will perform writes directly to the disk.
We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false.
-->
<journal-buffer-timeout>44000</journal-buffer-timeout>


<!--
When using ASYNCIO, this will determine the writing queue depth for libaio.
-->
<journal-max-io>4096</journal-max-io>
<!--
You can verify the network health of a particular NIC by specifying the <network-check-NIC> element.
<network-check-NIC>theNicName</network-check-NIC>
-->

<!--
Use this to use an HTTP server to validate the network
<network-check-URL-list>http://www.apache.org</network-check-URL-list> -->

<!-- <network-check-period>10000</network-check-period> -->
<!-- <network-check-timeout>1000</network-check-timeout> -->

<!-- this is a comma separated list, no spaces, just DNS or IPs
it should accept IPV6
Warning: Make sure you understand your network topology as this is meant to validate if your network is valid.
Using IPs that could eventually disappear or be partially visible may defeat the purpose.
You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running -->
<!-- <network-check-list>10.0.0.1</network-check-list> -->

<!-- use this to customize the ping used for ipv4 addresses -->
<!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> -->

<!-- use this to customize the ping used for ipv6 addresses -->
<!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> -->




<!-- how often we are looking for how many bytes are being used on the disk in ms -->
<disk-scan-period>5000</disk-scan-period>

<!-- once the disk hits this limit the system will block, or close the connection in certain protocols
that won't support flow control. -->
<max-disk-usage>98</max-disk-usage>

<!-- should the broker detect dead locks and other issues -->
<critical-analyzer>true</critical-analyzer>

<critical-analyzer-timeout>120000</critical-analyzer-timeout>

<critical-analyzer-check-period>60000</critical-analyzer-check-period>

<critical-analyzer-policy>HALT</critical-analyzer-policy>


<page-sync-timeout>300000</page-sync-timeout>


<!-- the system will enter into page mode once you hit this limit. This is an estimate in bytes of how much the messages are using in memory
The system will use half of the available memory (-Xmx) by default for the global-max-size.
You may specify a different value here if you need to customize it to your needs.
<global-max-size>100Mb</global-max-size> -->

<!-- the maximum number of messages accepted before entering full address mode.
if global-max-size is specified the full address mode will be specified by whatever hits it first. -->
<global-max-messages>-1</global-max-messages>

<acceptors>

<!-- useEpoll means: it will use Netty epoll if you are on a system (Linux) that supports it -->
<!-- amqpCredits: The number of credits sent to AMQP producers -->
<!-- amqpLowCredits: The server will send the # credits specified at amqpCredits at this low mark -->
<!-- amqpDuplicateDetection: If you are not using duplicate detection, set this to false
as duplicate detection requires applicationProperties to be parsed on the server. -->
<!-- amqpMinLargeMessageSize: Determines how many bytes are considered large, so we start using files to hold their data.
default: 102400, -1 would mean to disable large message control -->

<!-- Note: If an acceptor needs to be compatible with HornetQ and/or Artemis 1.x clients add
"anycastPrefix=jms.queue.;multicastPrefix=jms.topic." to the acceptor url.
See https://issues.apache.org/jira/browse/ARTEMIS-1644 for more information. -->


<!-- Acceptor for every supported protocol -->
<!-- <acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;stompEnableMessageId=true;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true;supportAdvisory=false;suppressInternalManagementObjects=false</acceptor> -->
<acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;stompEnableMessageId=true;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true;supportAdvisory=false;suppressInternalManagementObjects=false</acceptor>

<!-- AMQP Acceptor. Listens on default AMQP port for AMQP traffic.-->
<acceptor name="amqp">tcp://0.0.0.0:5672?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=AMQP;stompEnableMessageId=true;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpMinLargeMessageSize=102400;amqpDuplicateDetection=true</acceptor>

<!-- STOMP Acceptor. -->
<acceptor name="stomp">tcp://0.0.0.0:61613?anycastPrefix=/queue/;multicastPrefix=/topic/;tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=STOMP;stompEnableMessageId=true;useEpoll=true;connectionTtl=300000</acceptor>

<!-- HornetQ Compatibility Acceptor. Enables HornetQ Core and STOMP for legacy HornetQ clients. -->
<acceptor name="hornetq">tcp://0.0.0.0:5445?anycastPrefix=jms.queue.;multicastPrefix=jms.topic.;protocols=HORNETQ,STOMP;stompEnableMessageId=true;useEpoll=true</acceptor>

<!-- MQTT Acceptor -->
<acceptor name="mqtt">tcp://0.0.0.0:1883?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=MQTT;stompEnableMessageId=true;useEpoll=true</acceptor>

</acceptors>


<security-settings>
<security-setting match="#">
<permission type="createNonDurableQueue" roles="amq"/>
<permission type="deleteNonDurableQueue" roles="amq"/>
<permission type="createDurableQueue" roles="amq"/>
<permission type="deleteDurableQueue" roles="amq"/>
<permission type="createAddress" roles="amq"/>
<permission type="deleteAddress" roles="amq"/>
<permission type="consume" roles="amq"/>
<permission type="browse" roles="amq"/>
<permission type="send" roles="amq"/>
<!-- we need this otherwise ./artemis data imp wouldn't work -->
<permission type="manage" roles="amq"/>
</security-setting>
</security-settings>


<address-settings>
<!-- if you define auto-create on certain queues, management has to be auto-create -->
<address-setting match="activemq.management#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
</address-setting>
<!--default for catch all-->
<address-setting match="#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>

<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-delete-queues>false</auto-delete-queues>
<auto-delete-addresses>false</auto-delete-addresses>

<default-address-routing-type>ANYCAST</default-address-routing-type>

<!-- The size of each page file -->
<page-size-bytes>10M</page-size-bytes>

<!-- When we start applying the address-full-policy, e.g paging -->
<!-- Both are disabled by default, which means we will use the global-max-size/global-max-messages -->
<max-size-bytes>-1</max-size-bytes>
<max-size-messages>-1</max-size-messages>

<!-- When we read from paging into queues (memory) -->

<max-read-page-messages>-1</max-read-page-messages>
<max-read-page-bytes>20M</max-read-page-bytes>

<!-- Limit on paging capacity before starting to throw errors
/queue/CATALOG.ONCAT.DATA_READY
-->
<page-limit-bytes>-1</page-limit-bytes>
<page-limit-messages>-1</page-limit-messages>
</address-setting>
</address-settings>

<addresses>
<address name="DLQ">
<anycast>
<queue name="DLQ" />
</anycast>
</address>
<address name="ExpiryQueue">
<anycast>
<queue name="ExpiryQueue" />
</anycast>
</address>
</addresses>

<!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events
<broker-plugins>
<broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin">
<property key="LOG_ALL_EVENTS" value="true"/>
<property key="LOG_CONNECTION_EVENTS" value="true"/>
<property key="LOG_SESSION_EVENTS" value="true"/>
<property key="LOG_CONSUMER_EVENTS" value="true"/>
<property key="LOG_DELIVERING_EVENTS" value="true"/>
<property key="LOG_SENDING_EVENTS" value="true"/>
<property key="LOG_INTERNAL_EVENTS" value="true"/>
</broker-plugin>
</broker-plugins>
-->

</core>
</configuration>
Loading

0 comments on commit 9b0e7a2

Please sign in to comment.