Hexascroller

⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴🔴🔴⚫⚫⚫⚫⚫⚫⚫🔴🔴🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫🔴⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫⚫🔴⚫⚫🔴⚫⚫🔴🔴⚫⚫⚫🔴🔴⚫⚫⚫⚫⚫🔴🔴⚫⚫🔴🔴🔴⚫⚫🔴🔴⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫⚫⚫⚫🔴🔴⚫🔴⚫🔴🔴⚫⚫⚫⚫⚫🔴🔴🔴⚫⚫🔴⚫⚫🔴⚫🔴⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫🔴⚫⚫🔴⚫⚫🔴⚫🔴🔴⚫⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫🔴⚫🔴⚫⚫🔴🔴🔴⚫⚫⚫🔴🔴⚫⚫🔴⚫⚫🔴🔴⚫⚫⚫🔴⚫⚫🔴⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫🔴⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫🔴⚫⚫🔴⚫⚫🔴⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴🔴🔴⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫🔴⚫⚫🔴🔴⚫⚫⚫🔴🔴⚫⚫🔴⚫⚫🔴🔴⚫⚫⚫🔴⚫⚫⚫🔴🔴⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫

⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫⚫
⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫⚫⚫🔴⚫⚫⚫⚫
⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫🔴🔴⚫⚫🔴⚫🔴⚫⚫🔴🔴⚫⚫⚫🔴🔴⚫⚫⚫🔴🔴⚫🔴⚫🔴⚫⚫🔴🔴⚫⚫🔴⚫🔴⚫⚫🔴🔴⚫⚫🔴⚫🔴⚫🔴⚫⚫⚫⚫
⚫⚫⚫⚫🔴🔴🔴🔴🔴⚫🔴⚫⚫🔴⚫🔴⚫🔴⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫🔴⚫⚫⚫🔴🔴⚫⚫🔴⚫⚫🔴⚫🔴⚫🔴⚫🔴⚫⚫🔴⚫🔴🔴⚫⚫🔴⚫⚫⚫⚫
⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫🔴🔴🔴⚫⚫⚫🔴⚫⚫🔴🔴🔴🔴⚫⚫🔴🔴⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫🔴⚫🔴⚫🔴⚫🔴🔴🔴⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫
⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫🔴⚫⚫⚫⚫🔴⚫🔴⚫🔴⚫⚫🔴⚫⚫⚫⚫🔴⚫🔴⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫🔴⚫🔴⚫🔴⚫🔴⚫⚫⚫⚫🔴⚫⚫⚫⚫⚫⚫⚫⚫
⚫⚫⚫⚫🔴⚫⚫⚫🔴⚫⚫🔴🔴⚫⚫🔴⚫🔴⚫⚫🔴🔴🔴⚫⚫🔴🔴⚫⚫⚫🔴🔴⚫🔴⚫⚫⚫⚫🔴🔴⚫⚫🔴⚫🔴⚫⚫🔴🔴⚫⚫🔴⚫⚫⚫🔴⚫⚫⚫⚫

Installing Hexascroller service script

With systemd

    cp hexaservice/hexascroller.service /etc/systemd/system
    systemctl enable hexascroller.service
    systemctl start hexascroller.service

At Resistor, the service runs in:

/home/nycr/Hexascroller/hexaservice

Stop/start with

service hexascroller stop service hexascroller start service hexascroller restart

Run manually with

sudo apt install git python3-paho-mqtt python3-serial python3-pil
cd /home/nycr/Hexascroller/hexaservice
MQTT_HOST=mymqtthost.local MQTT_USER=mqttuser MQTT_PASS=verysecret /usr/bin/python3 service.py

The host is a Raspberry Pi Zero W Rev 1.1. Three Teensies on the usb hub run the displays.

Run in debug mode with service.py debug in one terminal, debug.py in another on the same machine.