JoyStick Module

Introduction

Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. This joystick module can be easily connect to Arduino by IO Expansion Shield For Arduino with supplied cables. Designed by PCBWay and fizzystudio team.

Specification

• Supply Voltage: 3.3V to 5V
• Interface: Analog x2,Digital x1
• PH2.0 Interface
• Size:35x39mm
• Weight:15g

PinOut

   

Pin X
S——Analog OUT	GND——GND	VCC——VCC
Pin Y
S——Analog OUT	GND——GND	VCC——VCC
Pin Z
DATA——Digital OUT	VCC——VCC	GND——VCC

Tutorial

Connection Diagram

Pin X
S——A1	GND——GND	VCC——VCC
Pin Y
S——A0	GND——GND	VCC——VCC
Pin Z
DATA——D3	VCC——VCC	GND——VCC

Sample Code

Libary installation

// # 
// # Editor     : letheascetic from PCBWay and FizzyStudio
// # Date       : 02.08.2017
 
// # Product name: Joystick Module
// # Product ID : SENZ003
// # Version     : 1.0
 
// # Description:
// # Modify the Sample code for the Joystick Module 
 
// # Connection:
// #        X-Axis  -> Analog pin 0
// #        Y-Axis  -> Analog pin 1
// #        Z-Axis  -> Digital pin 3
// # 
 

int JoyStick_X = 0; //x
int JoyStick_Y = 1; //y
int JoyStick_Z = 3; //key
 
void setup() 
{
  pinMode(JoyStick_Z, INPUT); 
  Serial.begin(9600); // 9600 bps
}
void loop() 
{
  int x,y,z;
  x=analogRead(JoyStick_X);
  y=analogRead(JoyStick_Y);
  z=digitalRead(JoyStick_Z);
  Serial.print(x ,DEC);
  Serial.print(",");
  Serial.print(y ,DEC);
  Serial.print(",");
  Serial.println(z ,DEC);
  delay(100);
}