Skip to content

pmarkiewka/harbor-helm

 
 

Repository files navigation

Helm Chart for Harbor

Notes: The master branch is in heavy development, please use the other stable versions instead. A high available solution for Harbor based on chart can be find here. And refer to the guide to upgrade the existing deployment.

This repository, including the issues, focus on deploying Harbor chart via helm. So for the functionality issues or questions of Harbor, please open issues on goharbor/harbor

Introduction

This Helm chart installs Harbor in a Kubernetes cluster. Welcome to contribute to Helm Chart for Harbor.

Prerequisites

  • Kubernetes cluster 1.10+
  • Helm 2.8.0+

Installation

Add Helm repository

helm repo add harbor https://helm.goharbor.io

Configure the chart

The following items can be set via --set flag during installation or configured by editing the values.yaml directly(need to download the chart first).

Configure the way how to expose Harbor service

  • Ingress: The ingress controller must be installed in the Kubernetes cluster. Notes: if the TLS is disabled, the port must be included in the command when pulling/pushing images. Refer to issue #5291 for the detail.
  • ClusterIP: Exposes the service on a cluster-internal IP. Choosing this value makes the service only reachable from within the cluster.
  • NodePort: Exposes the service on each Node’s IP at a static port (the NodePort). You’ll be able to contact the NodePort service, from outside the cluster, by requesting NodeIP:NodePort.
  • LoadBalancer: Exposes the service externally using a cloud provider’s load balancer.

Configure the external URL

The external URL for Harbor core service is used to:

  1. populate the docker/helm commands showed on portal
  2. populate the token service URL returned to docker/notary client

Format: protocol://domain[:port]. Usually:

  • if expose the service via Ingress, the domain should be the value of expose.ingress.hosts.core
  • if expose the service via ClusterIP, the domain should be the value of expose.clusterIP.name
  • if expose the service via NodePort, the domain should be the IP address of one Kubernetes node
  • if expose the service via LoadBalancer, set the domain as your own domain name and add a CNAME record to map the domain name to the one you got from the cloud provider

If Harbor is deployed behind the proxy, set it as the URL of proxy.

Configure the way how to persistent data

  • Disable: The data does not survive the termination of a pod.
  • Persistent Volume Claim(default): A default StorageClass is needed in the Kubernetes cluster to dynamic provision the volumes. Specify another StorageClass in the storageClass or set existingClaim if you have already existing persistent volumes to use.
  • External Storage(only for images and charts): For images and charts, the external storages are supported: azure, gcs, s3 swift and oss.

Configure the secrets

  • Secret keys: Secret keys are used for secure communication between components. Fill core.secret, jobservice.secret and registry.secret to configure.
  • Certificates:
    • notary: Used for authentication during communications. Fill notary.secretName to configure. Notary server certificate must be issued with notary service name as subject alternative name.
    • core: Used for token encryption/decryption. Fill core.secretName to configure.

Secrets and certificates must be setup to avoid changes on every Helm upgrade (see: #107).

Configure the other items listed in configuration section

Install the chart

Install the Harbor helm chart with a release name my-release:

helm 2:

helm install --name my-release harbor/harbor

helm 3:

helm install my-release harbor/harbor

Uninstallation

To uninstall/delete the my-release deployment:

helm 2:

helm delete --purge my-release

helm 3:

helm uninstall my-release

Configuration

The following table lists the configurable parameters of the Harbor chart and the default values.

Parameter Description Default
Expose
expose.type The way how to expose the service: ingress, clusterIP, nodePort or loadBalancer, other values will be ignored and the creation of service will be skipped. ingress
expose.tls.enabled Enable the tls or not true
expose.ingress.controller The ingress controller type. Currently supports default, gce and ncp default
expose.tls.secretName Fill the name of secret if you want to use your own TLS certificate. The secret contains keys named: tls.crt - the certificate (required), tls.key - the private key (required), ca.crt - the certificate of CA (optional), this enables the download link on portal to download the certificate of CA. These files will be generated automatically if the secretName is not set
expose.tls.notarySecretName By default, the Notary service will use the same cert and key as described above. Fill the name of secret if you want to use a separated one. Only needed when the expose.type is ingress.
expose.tls.commonName The common name used to generate the certificate, it's necessary when the expose.type is clusterIP or nodePort and expose.tls.secretName is null
expose.ingress.hosts.core The host of Harbor core service in ingress rule core.harbor.domain
expose.ingress.hosts.notary The host of Harbor Notary service in ingress rule notary.harbor.domain
expose.ingress.annotations The annotations used in ingress
expose.clusterIP.name The name of ClusterIP service harbor
expose.clusterIP.ports.httpPort The service port Harbor listens on when serving with HTTP 80
expose.clusterIP.ports.httpsPort The service port Harbor listens on when serving with HTTPS 443
expose.clusterIP.ports.notaryPort The service port Notary listens on. Only needed when notary.enabled is set to true 4443
expose.nodePort.name The name of NodePort service harbor
expose.nodePort.ports.http.port The service port Harbor listens on when serving with HTTP 80
expose.nodePort.ports.http.nodePort The node port Harbor listens on when serving with HTTP 30002
expose.nodePort.ports.https.port The service port Harbor listens on when serving with HTTPS 443
expose.nodePort.ports.https.nodePort The node port Harbor listens on when serving with HTTPS 30003
expose.nodePort.ports.notary.port The service port Notary listens on. Only needed when notary.enabled is set to true 4443
expose.nodePort.ports.notary.nodePort The node port Notary listens on. Only needed when notary.enabled is set to true 30004
expose.loadBalancer.name The name of service harbor
expose.loadBalancer.IP The IP of the loadBalancer. It works only when loadBalancer support assigning IP ""
expose.loadBalancer.ports.httpPort The service port Harbor listens on when serving with HTTP 80
expose.loadBalancer.ports.httpsPort The service port Harbor listens on when serving with HTTP 30002
expose.loadBalancer.ports.notaryPort The service port Notary listens on. Only needed when notary.enabled is set to true
expose.loadBalancer.annotations The annotations attached to the loadBalancer service {}
expose.loadBalancer.sourceRanges List of IP address ranges to assign to loadBalancerSourceRanges []
Persistence
persistence.enabled Enable the data persistence or not true
persistence.resourcePolicy Setting it to keep to avoid removing PVCs during a helm delete operation. Leaving it empty will delete PVCs after the chart deleted keep
persistence.persistentVolumeClaim.registry.existingClaim Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.registry.storageClass Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.registry.subPath The sub path used in the volume
persistence.persistentVolumeClaim.registry.accessMode The access mode of the volume ReadWriteOnce
persistence.persistentVolumeClaim.registry.size The size of the volume 5Gi
persistence.persistentVolumeClaim.chartmuseum.existingClaim Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.chartmuseum.storageClass Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.chartmuseum.subPath The sub path used in the volume
persistence.persistentVolumeClaim.chartmuseum.accessMode The access mode of the volume ReadWriteOnce
persistence.persistentVolumeClaim.chartmuseum.size The size of the volume 5Gi
persistence.persistentVolumeClaim.jobservice.existingClaim Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.jobservice.storageClass Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.jobservice.subPath The sub path used in the volume
persistence.persistentVolumeClaim.jobservice.accessMode The access mode of the volume ReadWriteOnce
persistence.persistentVolumeClaim.jobservice.size The size of the volume 1Gi
persistence.persistentVolumeClaim.database.existingClaim Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.storageClass Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.subPath The sub path used in the volume. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.accessMode The access mode of the volume. If external database is used, the setting will be ignored ReadWriteOnce
persistence.persistentVolumeClaim.database.size The size of the volume. If external database is used, the setting will be ignored 1Gi
persistence.persistentVolumeClaim.redis.existingClaim Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.storageClass Specify the storageClass used to provision the volume. Or the default StorageClass will be used(the default). Set it to - to disable dynamic provisioning. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.subPath The sub path used in the volume. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.accessMode The access mode of the volume. If external Redis is used, the setting will be ignored ReadWriteOnce
persistence.persistentVolumeClaim.redis.size The size of the volume. If external Redis is used, the setting will be ignored 1Gi
persistence.imageChartStorage.disableredirect The configuration for managing redirects from content backends. For backends which not supported it (such as using minio for s3 storage type), please set it to true to disable redirects. Refer to the guide for more information about the detail false
persistence.imageChartStorage.caBundleSecretName Specify the caBundleSecretName if the storage service uses a self-signed certificate. The secret must contain keys named ca.crt which will be injected into the trust store of registry's and chartmuseum's containers.
persistence.imageChartStorage.type The type of storage for images and charts: filesystem, azure, gcs, s3, swift or oss. The type must be filesystem if you want to use persistent volumes for registry and chartmuseum. Refer to the guide for more information about the detail filesystem
General
externalURL The external URL for Harbor core service https://core.harbor.domain
uaaSecretName If using external UAA auth which has a self signed cert, you can provide a pre-created secret containing it under the key ca.crt. ``
imagePullPolicy The image pull policy
imagePullSecrets The imagePullSecrets names for all deployments
updateStrategy.type The update strategy for deployments with persistent volumes(jobservice, registry and chartmuseum): RollingUpdate or Recreate. Set it as Recreate when RWM for volumes isn't supported RollingUpdate
logLevel The log level: debug, info, warning, error or fatal info
harborAdminPassword The initial password of Harbor admin. Change it from portal after launching Harbor Harbor12345
secretkey The key used for encryption. Must be a string of 16 chars not-a-secure-key
proxy.httpProxy The URL of the HTTP proxy server
proxy.httpsProxy The URL of the HTTPS proxy server
proxy.noProxy The URLs that the proxy settings not apply to 127.0.0.1,localhost,.local,.internal
proxy.components The component list that the proxy settings apply to core, jobservice, clair
Nginx (if expose the service via ingress, the Nginx will not be used)
nginx.image.repository Image repository goharbor/nginx-photon
nginx.image.tag Image tag dev
nginx.replicas The replica count 1
nginx.resources The resources to allocate for container undefined
nginx.nodeSelector Node labels for pod assignment {}
nginx.tolerations Tolerations for pod assignment []
nginx.affinity Node/Pod affinities {}
nginx.podAnnotations Annotations to add to the nginx pod {}
Portal
portal.image.repository Repository for portal image goharbor/harbor-portal
portal.image.tag Tag for portal image dev
portal.replicas The replica count 1
portal.resources The resources to allocate for container undefined
portal.nodeSelector Node labels for pod assignment {}
portal.tolerations Tolerations for pod assignment []
portal.affinity Node/Pod affinities {}
portal.podAnnotations Annotations to add to the portal pod {}
Core
core.image.repository Repository for Harbor core image goharbor/harbor-core
core.image.tag Tag for Harbor core image dev
core.replicas The replica count 1
core.livenessProbe.initialDelaySeconds The initial delay in seconds for the liveness probe 300
core.resources The resources to allocate for container undefined
core.nodeSelector Node labels for pod assignment {}
core.tolerations Tolerations for pod assignment []
core.affinity Node/Pod affinities {}
core.podAnnotations Annotations to add to the core pod {}
core.secret Secret is used when core server communicates with other components. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
core.secretName Fill the name of a kubernetes secret if you want to use your own TLS certificate and private key for token encryption/decryption. The secret must contain keys named: tls.crt - the certificate and tls.key - the private key. The default key pair will be used if it isn't set
core.xsrfKey The XSRF key. Will be generated automatically if it isn't specified
Jobservice
jobservice.image.repository Repository for jobservice image goharbor/harbor-jobservice
jobservice.image.tag Tag for jobservice image dev
jobservice.replicas The replica count 1
jobservice.maxJobWorkers The max job workers 10
jobservice.jobLogger The logger for jobs: file, database or stdout file
jobservice.resources The resources to allocate for container undefined
jobservice.nodeSelector Node labels for pod assignment {}
jobservice.tolerations Tolerations for pod assignment []
jobservice.affinity Node/Pod affinities {}
jobservice.podAnnotations Annotations to add to the jobservice pod {}
jobservice.secret Secret is used when job service communicates with other components. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
Registry
registry.registry.image.repository Repository for registry image goharbor/registry-photon
registry.registry.image.tag Tag for registry image
registry.registry.resources The resources to allocate for container undefined
registry.controller.image.repository Repository for registry controller image goharbor/harbor-registryctl
registry.controller.image.tag Tag for registry controller image
registry.controller.resources The resources to allocate for container undefined
registry.replicas The replica count 1
registry.nodeSelector Node labels for pod assignment {}
registry.tolerations Tolerations for pod assignment []
registry.affinity Node/Pod affinities {}
registry.middleware Middleware is used to add support for a CDN between backend storage and docker pull recipient. See official docs.
registry.podAnnotations Annotations to add to the registry pod {}
registry.secret Secret is used to secure the upload state from client and registry storage backend. See official docs. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
Chartmuseum
chartmuseum.enabled Enable chartmusuem to store chart true
chartmuseum.absoluteUrl If true, ChartMuseum will return absolute URLs. The default behavior is to return relative URLs false
chartmuseum.image.repository Repository for chartmuseum image goharbor/chartmuseum-photon
chartmuseum.image.tag Tag for chartmuseum image dev
chartmuseum.replicas The replica count 1
chartmuseum.resources The resources to allocate for container undefined
chartmuseum.nodeSelector Node labels for pod assignment {}
chartmuseum.tolerations Tolerations for pod assignment []
chartmuseum.affinity Node/Pod affinities {}
chartmuseum.podAnnotations Annotations to add to the chart museum pod {}
Clair
clair.enabled Enable Clair true
clair.clair.image.repository Repository for clair image goharbor/clair-photon
clair.clair.image.tag Tag for clair image dev
clair.clair.resources The resources to allocate for clair container
clair.adapter.image.repository Repository for clair adapter image goharbor/clair-adapter-photon
clair.adapter.image.tag Tag for clair adapter image dev
clair.adapter.resources The resources to allocate for clair adapter container
clair.replicas The replica count 1
clair.updatersInterval The interval of clair updaters, the unit is hour, set to 0 to disable the updaters 12
clair.nodeSelector Node labels for pod assignment {}
clair.tolerations Tolerations for pod assignment []
clair.affinity Node/Pod affinities {}
clair.podAnnotations Annotations to add to the clair pod {}
Notary
notary.enabled Enable Notary? true
notary.server.image.repository Repository for notary server image goharbor/notary-server-photon
notary.server.image.tag Tag for notary server image dev
notary.server.replicas The replica count
notary.server.resources The resources to allocate for container undefined
notary.signer.image.repository Repository for notary signer image goharbor/notary-signer-photon
notary.signer.image.tag Tag for notary signer image dev
notary.signer.replicas The replica count
notary.signer.resources The resources to allocate for container undefined
notary.nodeSelector Node labels for pod assignment {}
notary.tolerations Tolerations for pod assignment []
notary.affinity Node/Pod affinities {}
notary.podAnnotations Annotations to add to the notary pod {}
notary.secretName Fill the name of a kubernetes secret if you want to use your own TLS certificate authority, certificate and private key for notary communications. The secret must contain keys named tls.ca, tls.crt and tls.key that contain the CA, certificate and private key. They will be generated if not set.
Database
database.type If external database is used, set it to external internal
database.internal.image.repository Repository for database image goharbor/harbor-db
database.internal.image.tag Tag for database image dev
database.internal.initContainerImage.repository Repository for the init container image busybox
database.internal.initContainerImage.tag Tag for the init container image latest
database.internal.password The password for database changeit
database.internal.resources The resources to allocate for container undefined
database.internal.nodeSelector Node labels for pod assignment {}
database.internal.tolerations Tolerations for pod assignment []
database.internal.affinity Node/Pod affinities {}
database.external.host The hostname of external database 192.168.0.1
database.external.port The port of external database 5432
database.external.username The username of external database user
database.external.password The password of external database password
database.external.coreDatabase The database used by core service registry
database.external.clairDatabase The database used by clair clair
database.external.notaryServerDatabase The database used by Notary server notary_server
database.external.notarySignerDatabase The database used by Notary signer notary_signer
database.external.sslmode Connection method of external database (require, verify-full, verify-ca, disable) disable
database.maxIdleConns The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained. 50
database.maxOpenConns The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections. 100
database.podAnnotations Annotations to add to the database pod {}
Redis
redis.type If external redis is used, set it to external internal
redis.internal.image.repository Repository for redis image goharbor/redis-photon
redis.internal.image.tag Tag for redis image dev
redis.internal.resources The resources to allocate for container undefined
redis.internal.nodeSelector Node labels for pod assignment {}
redis.internal.tolerations Tolerations for pod assignment []
redis.internal.affinity Node/Pod affinities {}
redis.external.host The hostname of external Redis 192.168.0.2
redis.external.port The port of external Redis 6379
redis.external.coreDatabaseIndex The database index for core 0
redis.external.jobserviceDatabaseIndex The database index for jobservice 1
redis.external.registryDatabaseIndex The database index for registry 2
redis.external.chartmuseumDatabaseIndex The database index for chartmuseum 3
redis.external.clairAdapterIndex The database index for clair adapter 4
redis.external.password The password of external Redis
redis.podAnnotations Annotations to add to the redis pod {}

About

The helm chart to deploy Harbor

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Smarty 90.9%
  • Shell 9.1%