Build and publish CUDA wheels

.ci/scripts/wheel/cuda_arch_list.sh

@@ -0,0 +1,126 @@
+#!/usr/bin/env bash
+# Copyright (c) Meta Platforms, Inc. and affiliates.
+# All rights reserved.
+#
+# This source code is licensed under the BSD-style license found in the
+# LICENSE file in the root directory of this source tree.
+
+# GPU architectures to compile device code for, chosen per release row rather than detected from
+# the build machine.
+#
+# Without this the build compiles for whichever GPU the builder happens to have. The wheel then
+# installs on every machine the row claims and fails when a model runs on a different generation,
+# with an error that looks like a model problem rather than a packaging one. Detection is the right
+# default for a local build and the wrong one for a published artifact.
+#
+# The value is published as TORCH_CUDA_ARCH_LIST rather than CMAKE_CUDA_ARCHITECTURES, because
+# PyTorch's CMake rejects the latter and overrides it, so setting only that reduces the build to a
+# single detected architecture.
+
+# The architectures each row serves. Two rules decide the list, and they pull in opposite directions.
+#
+# The upper end follows the published PyTorch build for that train, read from its own library rather than
+# chosen by reasoning about which GPUs matter. A delegate is only useful where torch already runs, and an
+# architecture torch supports but this wheel omits produces a wheel that installs and then fails at the
+# first kernel launch. Two omissions found that way were the GPU on the runner that tests these wheels,
+# and a common desktop card.
+#
+# The lower end does NOT follow torch. It stops at 8.0 even though torch reaches further down, because one
+# source here compiles an integer matrix-multiply path only at 8.0 and above. Below that a user gets a
+# delegate that loads, runs most models, and fails on one needing that operator, which is worse than a row
+# that never claimed the device. So these lists are narrower than torch at the bottom on purpose.
+_cuda_arch_x86_64_cu130="8.0 8.6 8.9 9.0 10.0 12.0"
+_cuda_arch_x86_64_cu132="${_cuda_arch_x86_64_cu130}"
+
+# The architectures the published aarch64 PyTorch CUDA build covers, read from its own library on an ARM
+# machine, for the same reason as the x86_64 rows above. Includes the ARM module whose train matches.
+_cuda_arch_aarch64_cu130="8.0 9.0 10.0 11.0 12.0"
+_cuda_arch_aarch64_cu132="${_cuda_arch_aarch64_cu130}"
+
+# The older CUDA train.
+#
+# The two architectures do not carry identical lists, because each covers what the published PyTorch
+# build for that architecture covers, and those differ. Matching them to each other instead would mean
+# advertising a GPU on one architecture that PyTorch cannot serve there.
+#
+# The smaller embedded modules are deliberately absent. An embedded-only architecture in a generic
+# wheel would advertise a device the row cannot otherwise serve, since those devices also need the
+# CUDA, TensorRT and PyTorch pinned by their own software release rather than the ones a generic
+# wheel resolves.
+#
+# The floor is 8.0 rather than the oldest architecture PyTorch still carries. One of these sources compiles
+# an integer matrix-multiply path only at 8.0 and newer, so an older architecture would get a delegate that
+# loads, runs most models, and fails on one that needs that operator. Claiming hardware the delegate only
+# partly serves is the same problem the embedded modules have, so the row leaves it out for the same reason.
+_cuda_arch_x86_64_cu126="8.0 8.6 8.9 9.0"
+_cuda_arch_aarch64_cu126="8.0 9.0"  # what the aarch64 build of this train covers
+
+# A CUDA train with no architecture list would leave the build detecting the builder's GPU, which is
+# the failure this file exists to prevent. Adding a train to the release matrix without adding its
+# architectures should fail loudly rather than silently produce a single-GPU wheel.
+_executorch_unknown_train() {
+  echo "cuda_arch_list.sh: no GPU architecture list for CUDA train '$1' on $(uname -m)." >&2
+  echo "Add one before building this row, or the wheel ships device code for one GPU only." >&2
+  return 64
+}
+
+# The architectures for the current row, space separated in the dotted form PyTorch expects.
+executorch_cuda_arch_list() {
+  local machine
+  machine="$(uname -m)"
+  # The wheel build exports the row's CUDA train as CU_VERSION. DESIRED_CUDA is the name of the
+  # matrix field rather than of the variable, so reading only that leaves every row falling back to
+  # detecting the builder's GPU.
+  local train="${CU_VERSION:-${DESIRED_CUDA:-}}"
+  # A CPU row names no CUDA train and needs no architectures, so it is not an error.
+  #
+  # A CUDA row always names one, so an empty value there means the row lost it. Treating that as a CPU
+  # row let the build fall back to detecting the builder's GPU, which produces a wheel carrying device
+  # code for whatever machine happened to build it while every check still reports green.
+  case "${train}" in
+    "" | cpu | CPU | none | NONE)
+      if [ "${EXECUTORCH_BUILD_CUDA:-}" = "1" ]; then
+        echo "this is a CUDA build but the row's CUDA version is '${train}', which names no CUDA" >&2
+        echo "train. Refusing to detect the builder GPU instead." >&2
+        return 65
+      fi
+      return 0
+      ;;
+  esac
+  # The value arrives as cu130, while some callers pass 13.0 instead.
+  train="${train#cu}"
+  train="${train//./}"
+
+  case "${machine}" in
+    aarch64 | arm64)
+      case "${train}" in
+        126) printf '%s' "${_cuda_arch_aarch64_cu126}" ;;
+        130) printf '%s' "${_cuda_arch_aarch64_cu130}" ;;
+        132) printf '%s' "${_cuda_arch_aarch64_cu132}" ;;
+        *) _executorch_unknown_train "${train}" ;;
+      esac
+      ;;
+    x86_64)
+      case "${train}" in
+        126) printf '%s' "${_cuda_arch_x86_64_cu126}" ;;
+        130) printf '%s' "${_cuda_arch_x86_64_cu130}" ;;
+        132) printf '%s' "${_cuda_arch_x86_64_cu132}" ;;
+        *) _executorch_unknown_train "${train}" ;;
+      esac
+      ;;
+    *) _executorch_unknown_train "${train}" ;;
+  esac
+}
+
+# The same list with a portable form appended for the newest architecture, so a GPU newer than any
+# in the row can still run the wheel by compiling that form at load time. Without it a newer GPU
+# gets no usable code at all.
+executorch_cuda_arch_list_with_ptx() {
+  local dotted top
+  # Propagate a failed lookup rather than reporting an empty list, since a caller cannot tell an
+  # unknown row from a CPU row and the unknown one must not pass silently.
+  dotted="$(executorch_cuda_arch_list)" || return $?
+  [ -n "${dotted}" ] || return 0
+  top="${dotted##* }"
+  printf '%s %s+PTX' "${dotted}" "${top}"
+}

.ci/scripts/wheel/envvar_cuda_linux.sh

@@ -0,0 +1,42 @@
+# Copyright (c) Meta Platforms, Inc. and affiliates.
+# All rights reserved.
+#
+# This source code is licensed under the BSD-style license found in the
+# LICENSE file in the root directory of this source tree.
+
+# This file is sourced into the environment before building a pip wheel. It
+# should typically only contain shell variable assignments. Be sure to export
+# any variables so that subprocesses will see them.
+
+source "${GITHUB_WORKSPACE}/${REPOSITORY}/.ci/scripts/wheel/envvar_base.sh"
+
+# Ask for the CUDA delegate explicitly rather than letting the build detect a toolkit. A detected
+# build is fine locally, but a release row states what it is producing, and a row that silently
+# produced a CPU wheel because the toolkit was missing would publish under a CUDA name.
+export EXECUTORCH_BUILD_CUDA=1
+export CMAKE_ARGS="${CMAKE_ARGS} -DEXECUTORCH_BUILD_CUDA=ON"
+
+# Fail the build if CUDA is not actually present. Without this the packaging step would look for
+# CUDA libraries that were never built and report a confusing missing-file error several minutes
+# after the real problem.
+if [ ! -x "${CUDA_HOME:-/usr/local/cuda}/bin/nvcc" ]; then
+  echo "EXECUTORCH_BUILD_CUDA is set but no nvcc was found. This row cannot build a CUDA wheel." >&2
+  exit 1
+fi
+
+# Compile device code for the GPUs this release row claims, rather than for whichever GPU the
+# builder happens to have. A wheel built by detection alone installs on every machine the row covers
+# and then fails when a model runs on a different generation.
+source "${GITHUB_WORKSPACE}/${REPOSITORY}/.ci/scripts/wheel/cuda_arch_list.sh"
+# The status is checked rather than only the output. An unrecognised row makes the lookup fail, and
+# this file is sourced rather than run under a failing-command shell, so ignoring the status would
+# leave the variable unset and let the build fall back to detecting the builder's own GPU. That is
+# exactly the outcome this is meant to prevent, and it would ship quietly.
+if ! _executorch_cuda_arch="$(executorch_cuda_arch_list_with_ptx)"; then
+  echo "could not resolve GPU architectures for CU_VERSION=${CU_VERSION:-unset}" >&2
+  exit 1
+fi
+if [ -n "${_executorch_cuda_arch}" ]; then
+  export TORCH_CUDA_ARCH_LIST="${_executorch_cuda_arch}"
+  echo "building device code for: ${TORCH_CUDA_ARCH_LIST}"
+fi