ci: Add email checker #3

quic-viskuma · 2025-05-16T14:03:45Z

Integrate the Qualcomm Commit Emails Check Action to validate the commit's author and committer email addresses - https://github.com/qualcomm/commit-emails-check-action

Integrate the Qualcomm Commit Emails Check Action to validate the commit's author and committer email addresses - https://github.com/qualcomm/commit-emails-check-action Signed-off-by: VISHAL KUMAR <[email protected]>

quic-nasserg · 2025-05-16T16:06:31Z

Since these branches aren't expected to have PRs, I don't think adding this makes sense right now.

shashim-quic · 2025-05-17T04:48:26Z

Since these branches aren't expected to have PRs, I don't think adding this makes sense right now.

We intend to follow below workflow to update qcom-next:

prepare a qcom-next-staging that resets to latest upstream -rc
pull all topic branches in workspace over corresponding -rc
Raise a PR to qcom-next-staging that gives an opportunity for checker/CI/CD to go through
Once everything is clear and reviewed, push qcom-next-staging to qcom-next

This means CI/CD for PR and merge shall run on qcom-next-staging.

Pros with above approach:

qcom-next is kept intact during this whole reset and pull of topics, making it possible for folks to continue using it
qcom-next is updated in one shot once everything is clean causing least disruption

anshulg-qti · 2025-05-19T09:01:09Z

@quic-nasserg do you want to us to pick main or we should take a fixed SHA/tag that you'll provide

anshulg-qti · 2025-05-20T17:01:48Z

@shashim-quic, @quic-nasserg shared below updates

has added details of the checks being done by email checker in Add info on policy and other checks to README qualcomm/commit-emails-check-action#9
has recommended using main as the checks are quite stable, and if there's an update, it will be for a good reason that everyone will want

We should be good to merge the PR with this imo

quic-nasserg · 2025-05-20T18:45:15Z

This means CI/CD for PR and merge shall run on qcom-next-staging.

Ok, @shashim-quic should the workflow specifically target that branch then?

shashim-quic · 2025-05-21T03:40:56Z

This means CI/CD for PR and merge shall run on qcom-next-staging.

Ok, @shashim-quic should the workflow specifically target that branch then?

yes, if you mean that CI/CD should be running for PR raised on qcom-next-staging.

Per topic branch workflow remains as it is, where PRs are directly raised on corresponding
topic branch.

quic-nasserg · 2025-05-21T04:26:24Z

Per topic branch workflow remains as it is, where PRs are directly raised on corresponding
topic branch.

Is the plan now to have those topic branches in this same repo or a different one?

shashim-quic · 2025-05-21T05:37:07Z

Per topic branch workflow remains as it is, where PRs are directly raised on corresponding
topic branch.

Is the plan now to have those topic branches in this same repo or a different one?

All topic branches are hosted in different repository - https://github.com/qualcomm-linux/kernel-topics
The list of topic branches and related configuration is maintained here at https://github.com/qualcomm-linux/kernel-config/blob/main/qcom-next.conf

.github/workflows/email_checker.yml

Need email checker on qcom-next-staging branch only Co-authored-by: Nasser Grainawi <[email protected]> Signed-off-by: VISHAL KUMAR <[email protected]>

This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampolines for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The idea and most of the implementation is taken from the ARM64's implementation of the same feature. The idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. We use -fpatchable-function-entry to reserve 8 bytes above the function entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer to the associated ftrace_ops for that callsite. Functions are aligned to 8 bytes to make sure that the accesses to this literal are atomic. This approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. We've benchamrked this with the ftrace_ops sample module on Spacemit K1 Jupiter: Without this patch: baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1357958 | 13 | - | | 0 | 1 | 1302375 | 13 | - | | 0 | 2 | 1302375 | 13 | - | | 0 | 10 | 1379084 | 13 | - | | 0 | 100 | 1302458 | 13 | - | | 0 | 200 | 1302333 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13677833 | 136 | 123 | | 1 | 1 | 18500916 | 185 | 172 | | 1 | 2 | 22856459 | 228 | 215 | | 1 | 10 | 58824709 | 588 | 575 | | 1 | 100 | 505141584 | 5051 | 5038 | | 1 | 200 | 1580473126 | 15804 | 15791 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13561000 | 135 | 122 | | 2 | 0 | 19707292 | 197 | 184 | | 10 | 0 | 67774750 | 677 | 664 | | 100 | 0 | 714123125 | 7141 | 7128 | | 200 | 0 | 1918065668 | 19180 | 19167 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. With this patch: v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1459917 | 14 | - | | 0 | 1 | 1408000 | 14 | - | | 0 | 2 | 1383792 | 13 | - | | 0 | 10 | 1430709 | 14 | - | | 0 | 100 | 1383791 | 13 | - | | 0 | 200 | 1383750 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5238041 | 52 | 38 | | 1 | 1 | 5228542 | 52 | 38 | | 1 | 2 | 5325917 | 53 | 40 | | 1 | 10 | 5299667 | 52 | 38 | | 1 | 100 | 5245250 | 52 | 39 | | 1 | 200 | 5238459 | 52 | 39 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5239083 | 52 | 38 | | 2 | 0 | 19449417 | 194 | 181 | | 10 | 0 | 67718584 | 677 | 663 | | 100 | 0 | 709840708 | 7098 | 7085 | | 200 | 0 | 2203580626 | 22035 | 22022 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/3 of the overhead prior to this series (from 122ns to 38ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. Signed-off-by: Puranjay Mohan <[email protected]> [update kconfig, asm, refactor] Signed-off-by: Andy Chiu <[email protected]> Tested-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Ghiti <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>

Currently there is no ISB between __deactivate_cptr_traps() disabling traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating registers potentially affected by CPTR traps. When NV is not in use, this is safe because the relevant registers are only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this also implies that SVE traps affecting EL2 have been deactivated prior to __guest_entry(). When NV is in use, a guest hypervisor may have configured SVE traps for a nested context, and so it is necessary to have an ISB between __deactivate_cptr_traps() and fpsimd_lazy_switch_to_host(). Due to the current lack of an ISB, when a guest hypervisor enables SVE traps in CPTR, the host can take an unexpected SVE trap from within fpsimd_lazy_switch_to_host(), e.g. | Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE | CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT | Hardware name: FVP Base RevC (DT) | pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __kvm_vcpu_run+0x6f4/0x844 | lr : __kvm_vcpu_run+0x150/0x844 | sp : ffff800083903a60 | x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000 | x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0 | x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000 | x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000 | x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 | x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 | x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70 | x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000 | x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000 | Kernel panic - not syncing: Unhandled exception | CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT | Hardware name: FVP Base RevC (DT) | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x60/0x80 | dump_stack+0x18/0x24 | panic+0x168/0x360 | __panic_unhandled+0x68/0x74 | el1h_64_irq_handler+0x0/0x24 | el1h_64_sync+0x6c/0x70 | __kvm_vcpu_run+0x6f4/0x844 (P) | kvm_arm_vcpu_enter_exit+0x64/0xa0 | kvm_arch_vcpu_ioctl_run+0x21c/0x870 | kvm_vcpu_ioctl+0x1a8/0x9d0 | __arm64_sys_ioctl+0xb4/0xf4 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x30/0xcc | el0t_64_sync_handler+0x10c/0x138 | el0t_64_sync+0x198/0x19c | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x0000,000002c0,02df4fb9,97ee773f | Memory Limit: none | ---[ end Kernel panic - not syncing: Unhandled exception ]--- Fix this by adding an ISB between __deactivate_traps() and fpsimd_lazy_switch_to_host(). Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Fuad Tabba <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Mark Brown <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.16, take #3 - Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some missing synchronisation - A small fix for the irqbypass hook fixes, tightening the check and ensuring that we only deal with MSI for both the old and the new route entry - Rework the way the shadow LRs are addressed in a nesting configuration, plugging an embarrassing bug as well as simplifying the whole process - Add yet another fix for the dreaded arch_timer_edge_cases selftest

The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]>

When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 Fixes: 3699589 ("wifi: mwifiex: add host mlme for client mode") Cc: [email protected] Signed-off-by: Vitor Soares <[email protected]> Reviewed-by: Jeff Chen <[email protected]> Reviewed-by: Francesco Dolcini <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>

alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even when the alloc_tag_cttype is not allocated because: 1) alloc tagging is disabled because mem profiling is disabled (!alloc_tag_cttype) 2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype) 3) alloc tagging is enabled, but failed initialization (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype)) In all cases, alloc_tag_cttype is not allocated, and therefore alloc_tag_top_users() should not attempt to acquire the semaphore. This leads to a crash on memory allocation failure by attempting to acquire a non-existent semaphore: Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df] CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY Tainted: [D]=DIE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:down_read_trylock+0xaa/0x3b0 Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000 RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070 RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1 R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37 R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000 FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0 Call Trace: <TASK> codetag_trylock_module_list+0xd/0x20 alloc_tag_top_users+0x369/0x4b0 __show_mem+0x1cd/0x6e0 warn_alloc+0x2b1/0x390 __alloc_frozen_pages_noprof+0x12b9/0x21a0 alloc_pages_mpol+0x135/0x3e0 alloc_slab_page+0x82/0xe0 new_slab+0x212/0x240 ___slab_alloc+0x82a/0xe00 </TASK> As David Wang points out, this issue became easier to trigger after commit 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init"). Before the commit, the issue occurred only when it failed to allocate and initialize alloc_tag_cttype or if a memory allocation fails before alloc_tag_init() is called. After the commit, it can be easily triggered when memory profiling is compiled but disabled at boot. To properly determine whether alloc_tag_init() has been called and its data structures initialized, verify that alloc_tag_cttype is a valid pointer before acquiring the semaphore. If the variable is NULL or an error value, it has not been properly initialized. In such a case, just skip and do not attempt to acquire the semaphore. [[email protected]: v3] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init") Fixes: 1438d34 ("lib: add memory allocations report in show_mem()") Signed-off-by: Harry Yoo <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Acked-by: Suren Baghdasaryan <[email protected]> Tested-by: Raghavendra K T <[email protected]> Cc: Casey Chen <[email protected]> Cc: David Wang <[email protected]> Cc: Kent Overstreet <[email protected]> Cc: Yuanyuan Zhong <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Reported-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

This fixes the following UAF caused by not properly locking hdev when processing HCI_EV_NUM_COMP_PKTS: BUG: KASAN: slab-use-after-free in hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 Read of size 4 at addr ffff8880740f0940 by task kworker/u11:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u11:0 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci1 hci_rx_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 hci_num_comp_pkts_evt+0x1c8/0xa50 net/bluetooth/hci_event.c:4404 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 le_conn_complete_evt+0x3d6/0x1220 net/bluetooth/hci_event.c:5628 hci_le_enh_conn_complete_evt+0x189/0x470 net/bluetooth/hci_event.c:5794 hci_event_func net/bluetooth/hci_event.c:7474 [inline] hci_event_packet+0x78c/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Freed by task 9572: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_abort_conn_sync+0x5d1/0xdf0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Fixes: 134f4b3 ("Bluetooth: add support for skb TX SND/COMPLETION timestamping") Reported-by: Junvyyang, Tencent Zhuque Lab <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

This fixes the following UFA in hci_acl_create_conn_sync where a connection still pending is command submission (conn->state == BT_OPEN) maybe freed, also since this also can happen with the likes of hci_le_create_conn_sync fix it as well: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 Write of size 2 at addr ffff88805ffcc038 by task kworker/u11:2/9541 CPU: 1 UID: 0 PID: 9541 Comm: kworker/u11:2 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci3 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 123736: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 hci_conn_add_unset net/bluetooth/hci_conn.c:1051 [inline] hci_connect_acl+0x16c/0x4e0 net/bluetooth/hci_conn.c:1634 pair_device+0x418/0xa70 net/bluetooth/mgmt.c:3556 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x54b/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 103680: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Last potentially related work creation: kasan_save_stack+0x3e/0x60 mm/kasan/common.c:47 kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:548 insert_work+0x3d/0x330 kernel/workqueue.c:2183 __queue_work+0xbd9/0xfe0 kernel/workqueue.c:2345 queue_delayed_work_on+0x18b/0x280 kernel/workqueue.c:2561 pairing_complete+0x1e7/0x2b0 net/bluetooth/mgmt.c:3451 pairing_complete_cb+0x1ac/0x230 net/bluetooth/mgmt.c:3487 hci_connect_cfm include/net/bluetooth/hci_core.h:2064 [inline] hci_conn_failed+0x24d/0x310 net/bluetooth/hci_conn.c:1275 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Fixes: aef2aa4 ("Bluetooth: hci_event: Fix creating hci_conn object on error status") Reported-by: Junvyyang, Tencent Zhuque Lab <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

Ido Schimmel says: ==================== nexthop: Various fixes Patch #1 fixes a NPD that was recently reported by syzbot. Patch #2 fixes an issue in the existing FIB nexthop selftest. Patch #3 extends the selftest with test cases for the bug that was fixed in the first patch. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, round #3 - Invalidate nested MMUs upon freeing the PGD to avoid WARNs when visiting from an MMU notifier - Fixes to the TLB match process and TLB invalidation range for managing the VCNR pseudo-TLB - Prevent SPE from erroneously profiling guests due to UNKNOWN reset values in PMSCR_EL1 - Fix save/restore of host MDCR_EL2 to account for eagerly programming at vcpu_load() on VHE systems - Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios where an xarray's spinlock was nested with a *raw* spinlock - Permit stage-2 read permission aborts which are possible in the case of NV depending on the guest hypervisor's stage-2 translation - Call raw_spin_unlock() instead of the internal spinlock API - Fix parameter ordering when assigning VBAR_EL1 [Pull into kvm/master to fix conflicts. - Paolo]

Write combining is an optimization feature in CPUs that is frequently used by modern devices to generate 32 or 64 byte TLPs at the PCIe level. These large TLPs allow certain optimizations in the driver to HW communication that improve performance. As WC is unpredictable and optional the HW designs all tolerate cases where combining doesn't happen and simply experience a performance degradation. Unfortunately many virtualization environments on all architectures have done things that completely disable WC inside the VM with no generic way to detect this. For example WC was fully blocked in ARM64 KVM until commit 8c47ce3 ("KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device"). Trying to use WC when it is known not to work has a measurable performance cost (~5%). Long ago mlx5 developed an boot time algorithm to test if WC is available or not by using unique mlx5 HW features to measure how many large TLPs the device is receiving. The SW generates a large number of combining opportunities and if any succeed then WC is declared working. In mlx5 the WC optimization feature is never used by the kernel except for the boot time test. The WC is only used by userspace in rdma-core. Sadly modern ARM CPUs, especially NVIDIA Grace, have a combining implementation that is very unreliable compared to pretty much everything prior. This is being fixed architecturally in new CPUs with a new ST64B instruction, but current shipping devices suffer this problem. Unreliable means the SW can present thousands of combining opportunities and the HW will not combine for any of them, which creates a performance degradation, and critically fails the mlx5 boot test. However, the CPU is very sensitive to the instruction sequence used, with the better options being sufficiently good that the performance loss from the unreliable CPU is not measurable. Broadly there are several options, from worst to best: 1) A C loop doing a u64 memcpy. This was used prior to commit ef30228 ("IB/mlx5: Use __iowrite64_copy() for write combining stores") and failed almost all the time on Grace CPUs. 2) ARM64 assembly with consecutive 8 byte stores. This was implemented as an arch-generic __iowriteXX_copy() family of functions suitable for performance use in drivers for WC. commit ead7911 ("arm64/io: Provide a WC friendly __iowriteXX_copy()") provided the ARM implementation. 3) ARM64 assembly with consecutive 16 byte stores. This was rejected from kernel use over fears of virtualization failures. Common ARM VMMs will crash if STP is used against emulated memory. 4) A single NEON store instruction. Userspace has used this option for a very long time, it performs well. 5) For future silicon the new ST64B instruction is guaranteed to generate a 64 byte TLP 100% of the time The past upgrade from #1 to #2 was thought to be sufficient to solve this problem. However, more testing on more systems shows that #3 is still problematic at a low frequency and the kernel test fails. Thus, make the mlx5 use the same instructions as userspace during the boot time WC self test. This way the WC test matches the userspace and will properly detect the ability of HW to support the WC workload that userspace will generate. While #4 still has imperfect combining performance, it is substantially better than #2, and does actually give a performance win to applications. Self-test failures with #2 are like 3/10 boots, on some systems, #4 has never seen a boot failure. There is no real general use case for a NEON based WC flow in the kernel. This is not suitable for any performance path work as getting into/out of a NEON context is fairly expensive compared to the gain of WC. Future CPUs are going to fix this issue by using an new ARM instruction and __iowriteXX_copy() will be updated to use that automatically, probably using the ALTERNATES mechanism. Since this problem is constrained to mlx5's unique situation of needing a non-performance code path to duplicate what mlx5 userspace is doing as a matter of self-testing, implement it as a one line inline assembly in the driver directly. Lastly, this was concluded from the discussion with ARM maintainers which confirms that this is the best approach for the solution: https://lore.kernel.org/r/[email protected] Signed-off-by: Patrisious Haddad <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The ns_bpf_qdisc selftest triggers a kernel panic: Oops[#1]: CPU 0 Unable to handle kernel paging request at virtual address 0000000000741d58, era == 90000000851b5ac0, ra == 90000000851b5aa4 CPU: 0 UID: 0 PID: 449 Comm: test_progs Tainted: G OE 6.16.0+ #3 PREEMPT(full) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000851b5ac0 ra 90000000851b5aa4 tp 90000001076b8000 sp 90000001076bb600 a0 0000000000741ce8 a1 0000000000000001 a2 90000001076bb5c0 a3 0000000000000008 a4 90000001004c4620 a5 9000000100741ce8 a6 0000000000000000 a7 0100000000000000 t0 0000000000000010 t1 0000000000000000 t2 9000000104d24d30 t3 0000000000000001 t4 4f2317da8a7e08c4 t5 fffffefffc002f00 t6 90000001004c4620 t7 ffffffffc61c5b3d t8 0000000000000000 u0 0000000000000001 s9 0000000000000050 s0 90000001075bc800 s1 0000000000000040 s2 900000010597c400 s3 0000000000000008 s4 90000001075bc880 s5 90000001075bc8f0 s6 0000000000000000 s7 0000000000741ce8 s8 0000000000000000 ra: 90000000851b5aa4 __qdisc_run+0xac/0x8d8 ERA: 90000000851b5ac0 __qdisc_run+0xc8/0x8d8 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000741d58 PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE)] Process test_progs (pid: 449, threadinfo=000000009af02b3a, task=00000000e9ba4956) Stack : 0000000000000000 90000001075bc8ac 90000000869524a8 9000000100741ce8 90000001075bc800 9000000100415300 90000001075bc8ac 0000000000000000 900000010597c400 900000008694a000 0000000000000000 9000000105b59000 90000001075bc800 9000000100741ce8 0000000000000050 900000008513000c 9000000086936000 0000000100094d4c fffffff400676208 0000000000000000 9000000105b59000 900000008694a000 9000000086bf0dc0 9000000105b59000 9000000086bf0d68 9000000085147010 90000001075be788 0000000000000000 9000000086bf0f98 0000000000000001 0000000000000010 9000000006015840 0000000000000000 9000000086be6c40 0000000000000000 0000000000000000 0000000000000000 4f2317da8a7e08c4 0000000000000101 4f2317da8a7e08c4 ... Call Trace: [<90000000851b5ac0>] __qdisc_run+0xc8/0x8d8 [<9000000085130008>] __dev_queue_xmit+0x578/0x10f0 [<90000000853701c0>] ip6_finish_output2+0x2f0/0x950 [<9000000085374bc8>] ip6_finish_output+0x2b8/0x448 [<9000000085370b24>] ip6_xmit+0x304/0x858 [<90000000853c4438>] inet6_csk_xmit+0x100/0x170 [<90000000852b32f0>] __tcp_transmit_skb+0x490/0xdd0 [<90000000852b47fc>] tcp_connect+0xbcc/0x1168 [<90000000853b9088>] tcp_v6_connect+0x580/0x8a0 [<90000000852e7738>] __inet_stream_connect+0x170/0x480 [<90000000852e7a98>] inet_stream_connect+0x50/0x88 [<90000000850f2814>] __sys_connect+0xe4/0x110 [<90000000850f2858>] sys_connect+0x18/0x28 [<9000000085520c94>] do_syscall+0x94/0x1a0 [<9000000083df1fb8>] handle_syscall+0xb8/0x158 Code: 4001ad80 2400873f 2400832d <240073cc> 001137ff 001133ff 6407b41f 001503cc 0280041d ---[ end trace 0000000000000000 ]--- The bpf_fifo_dequeue prog returns a skb which is a pointer. The pointer is treated as a 32bit value and sign extend to 64bit in epilogue. This behavior is right for most bpf prog types but wrong for struct ops which requires LoongArch ABI. So let's sign extend struct ops return values according to the LoongArch ABI ([1]) and return value spec in function model. [1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html Cc: [email protected] Fixes: 6abf17d ("LoongArch: BPF: Add struct ops support for trampoline") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>

Since blamed commit, unregister_netdevice_many_notify() takes the netdev mutex if the device needs it. If the device list is too long, this will lock more device mutexes than lockdep can handle: unshare -n \ bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done' BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by kworker/u16:1/69: #0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work #1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work #2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net #3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch #4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify [..] Add a helper to close and then unlock a list of net_devices. Devices that are not up have to be skipped - netif_close_many always removes them from the list without any other actions taken, so they'd remain in locked state. Close devices whenever we've used up half of the tracking slots or we processed entire list without hitting the limit. Fixes: 7e4d784 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Expand the prefault memory selftest to add a regression test for a KVM bug where KVM's retry logic would result in (breakable) deadlock due to the memslot deletion waiting on prefaulting to release SRCU, and prefaulting waiting on the memslot to fully disappear (KVM uses a two-step process to delete memslots, and KVM x86 retries page faults if a to-be-deleted, a.k.a. INVALID, memslot is encountered). To exercise concurrent memslot remove, spawn a second thread to initiate memslot removal at roughly the same time as prefaulting. Test memslot removal for all testcases, i.e. don't limit concurrent removal to only the success case. There are essentially three prefault scenarios (so far) that are of interest: 1. Success 2. ENOENT due to no memslot 3. EAGAIN due to INVALID memslot For all intents and purposes, #1 and #2 are mutually exclusive, or rather, easier to test via separate testcases since writing to non-existent memory is trivial. But for #3, making it mutually exclusive with #1 _or_ #2 is actually more complex than testing memslot removal for all scenarios. The only requirement to let memslot removal coexist with other scenarios is a way to guarantee a stable result, e.g. that the "no memslot" test observes ENOENT, not EAGAIN, for the final checks. So, rather than make memslot removal mutually exclusive with the ENOENT scenario, simply restore the memslot and retry prefaulting. For the "no memslot" case, KVM_PRE_FAULT_MEMORY should be idempotent, i.e. should always fail with ENOENT regardless of how many times userspace attempts prefaulting. Pass in both the base GPA and the offset (instead of the "full" GPA) so that the worker can recreate the memslot. Signed-off-by: Yan Zhao <[email protected]> Co-developed-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>

The original code causes a circular locking dependency found by lockdep. ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U ------------------------------------------------------ xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660 but task is already holding lock: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devcd->mutex){+.+.}-{3:3}: mutex_lock_nested+0x4e/0xc0 devcd_data_write+0x27/0x90 sysfs_kf_bin_write+0x80/0xf0 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (kn->active#236){++++}-{0:0}: kernfs_drain+0x1e2/0x200 __kernfs_remove+0xae/0x400 kernfs_remove_by_name_ns+0x5d/0xc0 remove_files+0x54/0x70 sysfs_remove_group+0x3d/0xa0 sysfs_remove_groups+0x2e/0x60 device_remove_attrs+0xc7/0x100 device_del+0x15d/0x3b0 devcd_del+0x19/0x30 process_one_work+0x22b/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11c/0x250 ret_from_fork+0x26c/0x2e0 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}: __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 __flush_work+0x27a/0x660 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devcd->mutex); lock(kn->active#236); lock(&devcd->mutex); lock((work_completion)(&(&devcd->del_wk)->work)); *** DEADLOCK *** 5 locks held by xe_fault_inject/5091: #0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 #1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220 #2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280 #3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 #4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660 stack backtrace: CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)} Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021 Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 dump_stack+0x10/0x20 print_circular_bug+0x285/0x360 check_noncircular+0x135/0x150 ? register_lock_class+0x48/0x4a0 __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 ? __flush_work+0x25d/0x660 ? mark_held_locks+0x46/0x90 ? __flush_work+0x25d/0x660 __flush_work+0x27a/0x660 ? __flush_work+0x25d/0x660 ? trace_hardirqs_on+0x1e/0xd0 ? __pfx_wq_barrier_func+0x10/0x10 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 ? bus_find_device+0xa8/0xe0 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 ? __f_unlock_pos+0x15/0x20 ? __x64_sys_getdents64+0x9b/0x130 ? __pfx_filldir64+0x10/0x10 ? do_syscall_64+0x1a2/0xb60 ? clear_bhb_loop+0x30/0x80 ? clear_bhb_loop+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x76e292edd574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574 RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063 R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000 </TASK> xe 0000:03:00.0: [drm] Xe device coredump has been deleted. Fixes: 01daccf ("devcoredump : Serialize devcd_del work") Cc: Mukesh Ojha <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Cc: [email protected] # v6.1+ Signed-off-by: Maarten Lankhorst <[email protected]> Cc: Matthew Brost <[email protected]> Acked-by: Mukesh Ojha <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Michael Chan says: ==================== bnxt_en: Bug fixes Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver coredump feature recently added in 6.13. Patch #1 adds the necessary call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes a possible null pointer derefernce when using early versions of the FW with this feature. Patch #4 adds the coredump header information unconditionally to make it more robust. Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5 eliminates a dmesg warning when doing devlink reload. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x1635/0x2810 [86.863152] lock_acquire+0xc4/0x2f0 [86.863166] cpus_read_lock+0x41/0x100 [86.863180] stop_machine+0x1c/0x50 [86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.864735] __vma_bind+0x55/0x70 [i915] [86.865510] fence_work+0x26/0xa0 [i915] [86.866248] fence_notify+0xa1/0x140 [i915] [86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.867719] i915_sw_fence_commit+0x39/0x60 [i915] [86.868453] i915_vma_pin_ww+0x462/0x1360 [i915] [86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.870001] initial_plane_vma+0x307/0x840 [i915] [86.870774] intel_initial_plane_config+0x33f/0x670 [i915] [86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.872330] i915_driver_probe+0x7fa/0xe80 [i915] [86.873057] i915_pci_probe+0xe6/0x220 [i915] [86.873782] local_pci_probe+0x47/0xb0 [86.873802] pci_device_probe+0xf3/0x260 [86.873817] really_probe+0xf1/0x3c0 [86.873833] __driver_probe_device+0x8c/0x180 [86.873848] driver_probe_device+0x24/0xd0 [86.873862] __driver_attach+0x10f/0x220 [86.873876] bus_for_each_dev+0x7f/0xe0 [86.873892] driver_attach+0x1e/0x30 [86.873904] bus_add_driver+0x151/0x290 [86.873917] driver_register+0x5e/0x130 [86.873931] __pci_register_driver+0x7d/0x90 [86.873945] i915_pci_register_driver+0x23/0x30 [i915] [86.874678] i915_init+0x37/0x120 [i915] [86.875347] do_one_initcall+0x60/0x3f0 [86.875369] do_init_module+0x97/0x2a0 [86.875385] load_module+0x2c54/0x2d80 [86.875398] init_module_from_file+0x96/0xe0 [86.875413] idempotent_init_module+0x117/0x330 [86.875426] __x64_sys_finit_module+0x77/0x100 [86.875440] x64_sys_call+0x24de/0x2660 [86.875454] do_syscall_64+0x91/0xe90 [86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.875486] other info that might help us debug this: [86.875502] Chain exists of: cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [86.875539] Possible unsafe locking scenario: [86.875552] CPU0 CPU1 [86.875563] ---- ---- [86.875573] lock(reservation_ww_class_mutex); [86.875588] lock(reservation_ww_class_acquire); [86.875606] lock(reservation_ww_class_mutex); [86.875624] rlock(cpu_hotplug_lock); [86.875637] *** DEADLOCK *** [86.875650] 3 locks held by i915_module_loa/1432: [86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220 [86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.877305] stack backtrace: [86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary) [86.877334] Tainted: [U]=USER [86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020 [86.877339] Call Trace: [86.877344] <TASK> [86.877353] dump_stack_lvl+0x91/0xf0 [86.877364] dump_stack+0x10/0x20 [86.877369] print_circular_bug+0x285/0x360 [86.877379] check_noncircular+0x135/0x150 [86.877390] __lock_acquire+0x1635/0x2810 [86.877403] lock_acquire+0xc4/0x2f0 [86.877408] ? stop_machine+0x1c/0x50 [86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878173] cpus_read_lock+0x41/0x100 [86.878182] ? stop_machine+0x1c/0x50 [86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878916] stop_machine+0x1c/0x50 [86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.880375] __vma_bind+0x55/0x70 [i915] [86.881133] fence_work+0x26/0xa0 [i915] [86.881851] fence_notify+0xa1/0x140 [i915] [86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.883286] i915_sw_fence_commit+0x39/0x60 [i915] [86.884003] i915_vma_pin_ww+0x462/0x1360 [i915] [86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915] [86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.886281] initial_plane_vma+0x307/0x840 [i915] [86.887049] intel_initial_plane_config+0x33f/0x670 [i915] [86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.888587] i915_driver_probe+0x7fa/0xe80 [i915] [86.889293] ? mutex_unlock+0x12/0x20 [86.889301] ? drm_privacy_screen_get+0x171/0x190 [86.889308] ? acpi_dev_found+0x66/0x80 [86.889321] i915_pci_probe+0xe6/0x220 [i915] [86.890038] local_pci_probe+0x47/0xb0 [86.890049] pci_device_probe+0xf3/0x260 [86.890058] really_probe+0xf1/0x3c0 [86.890067] __driver_probe_device+0x8c/0x180 [86.890072] driver_probe_device+0x24/0xd0 [86.890078] __driver_attach+0x10f/0x220 [86.890083] ? __pfx___driver_attach+0x10/0x10 [86.890088] bus_for_each_dev+0x7f/0xe0 [86.890097] driver_attach+0x1e/0x30 [86.890101] bus_add_driver+0x151/0x290 [86.890107] driver_register+0x5e/0x130 [86.890113] __pci_register_driver+0x7d/0x90 [86.890119] i915_pci_register_driver+0x23/0x30 [i915] [86.890833] i915_init+0x37/0x120 [i915] [86.891482] ? __pfx_i915_init+0x10/0x10 [i915] [86.892135] do_one_initcall+0x60/0x3f0 [86.892145] ? __kmalloc_cache_noprof+0x33f/0x470 [86.892157] do_init_module+0x97/0x2a0 [86.892164] load_module+0x2c54/0x2d80 [86.892168] ? __kernel_read+0x15c/0x300 [86.892185] ? kernel_read_file+0x2b1/0x320 [86.892195] init_module_from_file+0x96/0xe0 [86.892199] ? init_module_from_file+0x96/0xe0 [86.892211] idempotent_init_module+0x117/0x330 [86.892224] __x64_sys_finit_module+0x77/0x100 [86.892230] x64_sys_call+0x24de/0x2660 [86.892236] do_syscall_64+0x91/0xe90 [86.892243] ? irqentry_exit+0x77/0xb0 [86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0 [86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.892261] RIP: 0033:0x7303e1b2725d [86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48 [86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d [86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c [86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80 [86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0 [86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710 [86.892304] </TASK> Call asynchronous variant of dma_fence_work_commit() in that case. v3: Provide more verbose in-line comment (Andi), - mention target environments in commit message. Fixes: 7d1c261 ("drm/i915: Take reservation lock around i915_vma_pin.") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985 Cc: Andi Shyti <[email protected]> Signed-off-by: Janusz Krzysztofik <[email protected]> Reviewed-by: Sebastian Brzezinka <[email protected]> Reviewed-by: Krzysztof Karas <[email protected]> Acked-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit 648ef13) Signed-off-by: Rodrigo Vivi <[email protected]>

Add VMX exit handlers for SEAMCALL and TDCALL to inject a #UD if a non-TD guest attempts to execute SEAMCALL or TDCALL. Neither SEAMCALL nor TDCALL is gated by any software enablement other than VMXON, and so will generate a VM-Exit instead of e.g. a native #UD when executed from the guest kernel. Note! No unprivileged DoS of the L1 kernel is possible as TDCALL and SEAMCALL #GP at CPL > 0, and the CPL check is performed prior to the VMX non-root (VM-Exit) check, i.e. userspace can't crash the VM. And for a nested guest, KVM forwards unknown exits to L1, i.e. an L2 kernel can crash itself, but not L1. Note #2! The Intel® Trust Domain CPU Architectural Extensions spec's pseudocode shows the CPL > 0 check for SEAMCALL coming _after_ the VM-Exit, but that appears to be a documentation bug (likely because the CPL > 0 check was incorrectly bundled with other lower-priority #GP checks). Testing on SPR and EMR shows that the CPL > 0 check is performed before the VMX non-root check, i.e. SEAMCALL #GPs when executed in usermode. Note #3! The aforementioned Trust Domain spec uses confusing pseudocode that says that SEAMCALL will #UD if executed "inSEAM", but "inSEAM" specifically means in SEAM Root Mode, i.e. in the TDX-Module. The long- form description explicitly states that SEAMCALL generates an exit when executed in "SEAM VMX non-root operation". But that's a moot point as the TDX-Module injects #UD if the guest attempts to execute SEAMCALL, as documented in the "Unconditionally Blocked Instructions" section of the TDX-Module base specification. Cc: [email protected] Cc: Kai Huang <[email protected]> Cc: Xiaoyao Li <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Dan Williams <[email protected]> Cc: Binbin Wu <[email protected]> Reviewed-by: Kai Huang <[email protected]> Reviewed-by: Binbin Wu <[email protected]> Reviewed-by: Xiaoyao Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.18, take #3 - Only adjust the ID registers when no irqchip has been created once per VM run, instead of doing it once per vcpu, as this otherwise triggers a pretty bad conbsistency check failure in the sysreg code. - Make sure the per-vcpu Fine Grain Traps are computed before we load the system registers on the HW, as we otherwise start running without anything set until the first preemption of the vcpu.

For some reason, of_find_node_with_property() is creating a spinlock recursion issue along with fwnode_count_parents(), and this issue is making all MediaTek boards unbootable. As of kernel v6.18-rc6, there are only three users of this function, one of which is this driver. Migrate away from of_find_node_with_property() by adding a local scpsys_get_legacy_regmap_node() function, which acts similarly to of_find_node_with_property(), and calling the former in place of the latter. This resolves the following spinlock recursion issue: [ 1.773979] BUG: spinlock recursion on CPU#2, kworker/u24:1/60 [ 1.790485] lock: devtree_lock+0x0/0x40, .magic: dead4ead, .owner: kworker/u24:1/60, .owner_cpu: 2 [ 1.791644] CPU: 2 UID: 0 PID: 60 Comm: kworker/u24:1 Tainted: G W 6.18.0-rc6 #3 PREEMPT [ 1.791649] Tainted: [W]=WARN [ 1.791650] Hardware name: MediaTek Genio-510 EVK (DT) [ 1.791653] Workqueue: events_unbound deferred_probe_work_func [ 1.791658] Call trace: [ 1.791659] show_stack+0x18/0x30 (C) [ 1.791664] dump_stack_lvl+0x68/0x94 [ 1.791668] dump_stack+0x18/0x24 [ 1.791672] spin_dump+0x78/0x88 [ 1.791678] do_raw_spin_lock+0x110/0x140 [ 1.791684] _raw_spin_lock_irqsave+0x58/0x6c [ 1.791690] of_get_parent+0x28/0x74 [ 1.791694] of_fwnode_get_parent+0x38/0x7c [ 1.791700] fwnode_count_parents+0x34/0xf0 [ 1.791705] fwnode_full_name_string+0x28/0x120 [ 1.791710] device_node_string+0x3e4/0x50c [ 1.791715] pointer+0x294/0x430 [ 1.791718] vsnprintf+0x21c/0x5bc [ 1.791722] vprintk_store+0x108/0x47c [ 1.791728] vprintk_emit+0xc4/0x350 [ 1.791732] vprintk_default+0x34/0x40 [ 1.791736] vprintk+0x24/0x30 [ 1.791740] _printk+0x60/0x8c [ 1.791744] of_node_release+0x154/0x194 [ 1.791749] kobject_put+0xa0/0x120 [ 1.791753] of_node_put+0x18/0x28 [ 1.791756] of_find_node_with_property+0x74/0x100 [ 1.791761] scpsys_probe+0x338/0x5e0 [ 1.791765] platform_probe+0x5c/0xa4 [ 1.791770] really_probe+0xbc/0x2ac [ 1.791774] __driver_probe_device+0x78/0x118 [ 1.791779] driver_probe_device+0x3c/0x170 [ 1.791783] __device_attach_driver+0xb8/0x150 [ 1.791788] bus_for_each_drv+0x88/0xe8 [ 1.791792] __device_attach+0x9c/0x1a0 [ 1.791796] device_initial_probe+0x14/0x20 [ 1.791801] bus_probe_device+0xa0/0xa4 [ 1.791805] deferred_probe_work_func+0x88/0xd0 [ 1.791809] process_one_work+0x1e8/0x448 [ 1.791813] worker_thread+0x1ac/0x340 [ 1.791816] kthread+0x138/0x220 [ 1.791821] ret_from_fork+0x10/0x20 Fixes: c29345f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval") Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Louis-Alexis Eyraud <[email protected]> Tested-by: Macpaul Lin <[email protected]> Reviewed-by: Macpaul Lin <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>

The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces: - EVK-M101 current sensors - EVK-M101 I2C - EVK-M101 UART - EVK-M101 port D Only the third USB interface is a UART. This change lets ftdi_sio probe the VID/PID and registers only interface #3 as a TTY, leaving the rest available for other drivers. [1] usb 5-1.3: new high-speed USB device number 11 using xhci_hcd usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00 usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.3: Product: EVK-M101 usb 5-1.3: Manufacturer: u-blox AG Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf Signed-off-by: Oleksandr Suvorov <[email protected]> Link: https://lore.kernel.org/[email protected]/ Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>

When interrupting perf stat in repeat mode with a signal the signal is passed to the child process but the repeat doesn't terminate: ``` $ perf stat -v --null --repeat 10 sleep 1 Control descriptor is not initialized [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] ^Csleep: Interrupt [ perf stat: executing run #3 ... ] [ perf stat: executing run #4 ... ] [ perf stat: executing run #5 ... ] [ perf stat: executing run #6 ... ] [ perf stat: executing run #7 ... ] [ perf stat: executing run #8 ... ] [ perf stat: executing run #9 ... ] [ perf stat: executing run #10 ... ] Performance counter stats for 'sleep 1' (10 runs): 0.9500 +- 0.0512 seconds time elapsed ( +- 5.39% ) 0.01user 0.02system 0:09.53elapsed 0%CPU (0avgtext+0avgdata 18940maxresident)k 29944inputs+0outputs (0major+2629minor)pagefaults 0swaps ``` Terminate the repeated run and give a reasonable exit value: ``` $ perf stat -v --null --repeat 10 sleep 1 Control descriptor is not initialized [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] ^Csleep: Interrupt Performance counter stats for 'sleep 1' (10 runs): 0.680 +- 0.321 seconds time elapsed ( +- 47.16% ) Command exited with non-zero status 130 0.00user 0.01system 0:02.05elapsed 0%CPU (0avgtext+0avgdata 70688maxresident)k 0inputs+0outputs (0major+5002minor)pagefaults 0swaps ``` Note, this also changes the exit value for non-repeat runs when interrupted by a signal. Reported-by: Ingo Molnar <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Ian Rogers <[email protected]> Tested-by: Thomas Richter <[email protected]> Signed-off-by: Namhyung Kim <[email protected]>

We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Fixes: 6cf3c97 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/92d75e21d95d163a41b5cea67a15cd33f547cba6.1764695650.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>

Petr Machata says: ==================== selftests: forwarding: vxlan_bridge_1q_mc_ul: Fix flakiness The net/forwarding/vxlan_bridge_1q_mc_ul selftest runs an overlay traffic, forwarded over a multicast-routed VXLAN underlay. In order to determine whether packets reach their intended destination, it uses a TC match. For convenience, it uses a flower match, which however does not allow matching on the encapsulated packet. So various service traffic ends up being indistinguishable from the test packets, and ends up confusing the test. To alleviate the problem, the test uses sleep to allow the necessary service traffic to run and clear the channel, before running the test traffic. This worked for a while, but lately we have nevertheless seen flakiness of the test in the CI. In this patchset, first generalize tc_rule_stats_get() to support u32 in patch #1, then in patch #2 convert the test to use u32 to allow parsing deeper into the packet, and in #3 drop the now-unnecessary sleep. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Fix a loop scenario of ethx:egress->ethx:egress Example setup to reproduce: tc qdisc add dev ethx root handle 1: drr tc filter add dev ethx parent 1: protocol ip prio 1 matchall \ action mirred egress redirect dev ethx Now ping out of ethx and you get a deadlock: [ 116.892898][ T307] ============================================ [ 116.893182][ T307] WARNING: possible recursive locking detected [ 116.893418][ T307] 6.18.0-rc6-01205-ge05021a829b8-dirty #204 Not tainted [ 116.893682][ T307] -------------------------------------------- [ 116.893926][ T307] ping/307 is trying to acquire lock: [ 116.894133][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.894517][ T307] [ 116.894517][ T307] but task is already holding lock: [ 116.894836][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.895252][ T307] [ 116.895252][ T307] other info that might help us debug this: [ 116.895608][ T307] Possible unsafe locking scenario: [ 116.895608][ T307] [ 116.895901][ T307] CPU0 [ 116.896057][ T307] ---- [ 116.896200][ T307] lock(&sch->root_lock_key); [ 116.896392][ T307] lock(&sch->root_lock_key); [ 116.896605][ T307] [ 116.896605][ T307] *** DEADLOCK *** [ 116.896605][ T307] [ 116.896864][ T307] May be due to missing lock nesting notation [ 116.896864][ T307] [ 116.897123][ T307] 6 locks held by ping/307: [ 116.897302][ T307] #0: ffff88800b4b0250 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xb20/0x2cf0 [ 116.897808][ T307] #1: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_output+0xa9/0x600 [ 116.898138][ T307] #2: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0x2c6/0x1ee0 [ 116.898459][ T307] #3: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.898782][ T307] #4: ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.899132][ T307] #5: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.899442][ T307] [ 116.899442][ T307] stack backtrace: [ 116.899667][ T307] CPU: 2 UID: 0 PID: 307 Comm: ping Not tainted 6.18.0-rc6-01205-ge05021a829b8-dirty #204 PREEMPT(voluntary) [ 116.899672][ T307] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 116.899675][ T307] Call Trace: [ 116.899678][ T307] <TASK> [ 116.899680][ T307] dump_stack_lvl+0x6f/0xb0 [ 116.899688][ T307] print_deadlock_bug.cold+0xc0/0xdc [ 116.899695][ T307] __lock_acquire+0x11f7/0x1be0 [ 116.899704][ T307] lock_acquire+0x162/0x300 [ 116.899707][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899713][ T307] ? srso_alias_return_thunk+0x5/0xfbef5 [ 116.899717][ T307] ? stack_trace_save+0x93/0xd0 [ 116.899723][ T307] _raw_spin_lock+0x30/0x40 [ 116.899728][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899731][ T307] __dev_queue_xmit+0x2210/0x3b50 Fixes: 178ca30 ("Revert "net/sched: Fix mirred deadlock on device recursion"") Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

… to macb_open() In the non-RT kernel, local_bh_disable() merely disables preemption, whereas it maps to an actual spin lock in the RT kernel. Consequently, when attempting to refill RX buffers via netdev_alloc_skb() in macb_mac_link_up(), a deadlock scenario arises as follows: WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e #39 Not tainted ------------------------------------------------------ kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit +0x148/0xb7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&queue->tx_ptr_lock){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x148/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #2 (_xmit_ETHER#2){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 sch_direct_xmit+0x11c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #1 ((softirq_ctrl.lock)){+.+.}-{3:3}: lock_release+0x250/0x348 __local_bh_enable_ip+0x7c/0x240 __netdev_alloc_skb+0x1b4/0x1d8 gem_rx_refill+0xdc/0x240 gem_init_rings+0xb4/0x108 macb_mac_link_up+0x9c/0x2b4 phylink_resolve+0x170/0x614 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #0 (&bp->lock){+.+.}-{3:3}: __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &bp->lock --> _xmit_ETHER#2 --> &queue->tx_ptr_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&queue->tx_ptr_lock); lock(_xmit_ETHER#2); lock(&queue->tx_ptr_lock); lock(&bp->lock); *** DEADLOCK *** Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0xa0/0xf0 dump_stack+0x18/0x24 print_circular_bug+0x28c/0x370 check_noncircular+0x198/0x1ac __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 Notably, invoking the mog_init_rings() callback upon link establishment is unnecessary. Instead, we can exclusively call mog_init_rings() within the ndo_open() callback. This adjustment resolves the deadlock issue. Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings() when opening the network interface via at91ether_open(), moving mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC check. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Cc: [email protected] Suggested-by: Kevin Hao <[email protected]> Signed-off-by: Xiaolei Wang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

The GPIO controller is configured as non-sleeping but it uses generic pinctrl helpers which use a mutex for synchronization. This can cause the following lockdep splat with shared GPIOs enabled on boards which have multiple devices using the same GPIO: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name: kworker/u16:0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 6 locks held by kworker/u16:0/12: #0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0}, at: process_one_work+0x18c/0x604 #1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x604 #2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x1b0 #3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 #4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at: gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy] #5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 irq event stamp: 81450 hardirqs last enabled at (81449): [<ffff8000813acba4>] _raw_spin_unlock_irqrestore+0x74/0x78 hardirqs last disabled at (81450): [<ffff8000813abfb8>] _raw_spin_lock_irqsave+0x84/0x88 softirqs last enabled at (79616): [<ffff8000811455fc>] __alloc_skb+0x17c/0x1e8 softirqs last disabled at (79614): [<ffff8000811455fc>] __alloc_skb+0x17c/0x1e8 CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.0-rc4-next-20260105+ #11975 PREEMPT Hardware name: Hardkernel ODROID-M1 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 __might_resched+0x144/0x248 __might_sleep+0x48/0x98 __mutex_lock+0x5c/0x894 mutex_lock_nested+0x24/0x30 pinctrl_get_device_gpio_range+0x44/0x128 pinctrl_gpio_direction+0x3c/0xe0 pinctrl_gpio_direction_output+0x14/0x20 rockchip_gpio_direction_output+0xb8/0x19c gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_direction_output+0x34/0xf8 gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy] gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_configure_flags+0xbc/0x480 gpiod_find_and_request+0x1a0/0x574 gpiod_get_index+0x58/0x84 devm_gpiod_get_index+0x20/0xb4 devm_gpiod_get_optional+0x18/0x30 rockchip_pcie_probe+0x98/0x380 platform_probe+0x5c/0xac really_probe+0xbc/0x298 Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio") Cc: [email protected] Reported-by: Marek Szyprowski <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Acked-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>

…/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2026-01-15 this is a pull request of 4 patches for net/main, it super-seeds the "can 2026-01-14" pull request. The dev refcount leak in patch #3 is fixed. The first 3 patches are by Oliver Hartkopp and revert the approach to instantly reject unsupported CAN frames introduced in net-next-for-v6.19 and replace it by placing the needed data into the CAN specific ml_priv. The last patch is by Tetsuo Handa and fixes a J1939 refcount leak for j1939_session in session deactivation upon receiving the second RTS. linux-can-fixes-for-6.19-20260115 * tag 'linux-can-fixes-for-6.19-20260115' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts can: raw: instantly reject disabled CAN frames can: propagate CAN device capabilities via ml_priv Revert "can: raw: instantly reject unsupported CAN frames" ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

When one iio device is a consumer of another, it is possible that the ->info_exist_lock of both ends up being taken when reading the value of the consumer device. Since they currently belong to the same lockdep class (being initialized in a single location with mutex_init()), that results in a lockdep warning CPU0 ---- lock(&iio_dev_opaque->info_exist_lock); lock(&iio_dev_opaque->info_exist_lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by sensors/414: #0: c31fd6dc (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x44/0x4e4 #1: c4f5a1c4 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x1c/0xac #2: c2827548 (kn->active#34){.+.+}-{0:0}, at: kernfs_seq_start+0x30/0xac #3: c1dd2b6 (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_read_channel_processed_scale+0x24/0xd8 stack backtrace: CPU: 0 UID: 0 PID: 414 Comm: sensors Not tainted 6.17.11 #5 NONE Hardware name: Generic AM33XX (Flattened Device Tree) Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x44/0x60 dump_stack_lvl from print_deadlock_bug+0x2b8/0x334 print_deadlock_bug from __lock_acquire+0x13a4/0x2ab0 __lock_acquire from lock_acquire+0xd0/0x2c0 lock_acquire from __mutex_lock+0xa0/0xe8c __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from iio_read_channel_raw+0x20/0x6c iio_read_channel_raw from rescale_read_raw+0x128/0x1c4 rescale_read_raw from iio_channel_read+0xe4/0xf4 iio_channel_read from iio_read_channel_processed_scale+0x6c/0xd8 iio_read_channel_processed_scale from iio_hwmon_read_val+0x68/0xbc iio_hwmon_read_val from dev_attr_show+0x18/0x48 dev_attr_show from sysfs_kf_seq_show+0x80/0x110 sysfs_kf_seq_show from seq_read_iter+0xdc/0x4e4 seq_read_iter from vfs_read+0x238/0x2e4 vfs_read from ksys_read+0x6c/0xec ksys_read from ret_fast_syscall+0x0/0x1c Just as the mlock_key already has its own lockdep class, add a lock_class_key for the info_exist mutex. Note that this has in theory been a problem since before IIO first left staging, but it only occurs when a chain of consumers is in use and that is not often done. Fixes: ac917a8 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.") Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Peter Rosin <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>

Jamal Hadi Salim says: ==================== net/sched: teql: Enforce hierarchy placement GangMin Kim <[email protected]> managed to create a UAF on qfq by inserting teql as a child qdisc and exploiting a qlen sync issue. teql is not intended to be used as a child qdisc. Lets enforce that rule in patch #1. Although patch #1 fixes the issue, we prevent another potential qlen exploit in qfq in patch #2 by enforcing the child's active status is not determined by inspecting the qlen. In patch #3 we add a tdc test case. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared(). Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ [1] Link: https://lore.kernel.org/all/[email protected]/ [2] Fixes: 59d9094 ("mm: hugetlb: independent PMD page table shared count") Signed-off-by: David Hildenbrand (Red Hat) <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Reviewed-by: Lance Yang <[email protected]> Tested-by: Lance Yang <[email protected]> Reviewed-by: Harry Yoo <[email protected]> Tested-by: Laurence Oberman <[email protected]> Reviewed-by: Lorenzo Stoakes <[email protected]> Acked-by: Oscar Salvador <[email protected]> Cc: Liu Shixin <[email protected]> Cc: Uschakow, Stanislav" <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

…itives The "valid" readout delay between the two reads of the watchdog is larger than the valid delta between the resulting watchdog and clocksource intervals, which results in false positive watchdog results. Assume TSC is the clocksource and HPET is the watchdog and both have a uncertainty margin of 250us (default). The watchdog readout does: 1) wdnow = read(HPET); 2) csnow = read(TSC); 3) wdend = read(HPET); The valid window for the delta between #1 and #3 is calculated by the uncertainty margins of the watchdog and the clocksource: m = 2 * watchdog.uncertainty_margin + cs.uncertainty margin; which results in 750us for the TSC/HPET case. The actual interval comparison uses a smaller margin: m = watchdog.uncertainty_margin + cs.uncertainty margin; which results in 500us for the TSC/HPET case. That means the following scenario will trigger the watchdog: Watchdog cycle N: 1) wdnow[N] = read(HPET); 2) csnow[N] = read(TSC); 3) wdend[N] = read(HPET); Assume the delay between #1 and #2 is 100us and the delay between #1 and Watchdog cycle N + 1: 4) wdnow[N + 1] = read(HPET); 5) csnow[N + 1] = read(TSC); 6) wdend[N + 1] = read(HPET); If the delay between #4 and #6 is within the 750us margin then any delay between #4 and #5 which is larger than 600us will fail the interval check and mark the TSC unstable because the intervals are calculated against the previous value: wd_int = wdnow[N + 1] - wdnow[N]; cs_int = csnow[N + 1] - csnow[N]; Putting the above delays in place this results in: cs_int = (wdnow[N + 1] + 610us) - (wdnow[N] + 100us); -> cs_int = wd_int + 510us; which is obviously larger than the allowed 500us margin and results in marking TSC unstable. Fix this by using the same margin as the interval comparison. If the delay between two watchdog reads is larger than that, then the readout was either disturbed by interconnect congestion, NMIs or SMIs. Fixes: 4ac1dd3 ("clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin") Reported-by: Daniel J Blueman <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Paul E. McKenney <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://patch.msgid.link/87bjjxc9dq.ffs@tglx

firmware populates MAC address, link modes (supported, advertised) and EEPROM data in shared firmware structure which kernel access via MAC block(CGX/RPM). Accessing fwdata, on boards booted with out MAC block leading to kernel panics. Internal error: Oops: 0000000096000005 [#1] SMP [ 10.460721] Modules linked in: [ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT [ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT) [ 10.479793] Workqueue: events work_for_cpu_fn [ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 10.491124] pc : rvu_sdp_init+0x18/0x114 [ 10.495051] lr : rvu_probe+0xe58/0x1d18 Fixes: 9978144 ("Octeontx2-af: Fetch MAC channel info from firmware") Fixes: 5f21226 ("Octeontx2-pf: ethtool: support multi advertise mode") Signed-off-by: Hariprasad Kelam <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

commit 9935df5 upstream. Reject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that was initially created with a guest_memfd binding, as KVM doesn't support toggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enabling KVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag. Failure to reject the new memslot results in a use-after-free due to KVM not unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLY change is easy enough, and can/will be done as a hardening measure (in anticipation of KVM supporting dirty logging on guest_memfd at some point), but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 </TASK> Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x3b/0x60 kfree+0xf5/0x440 kvm_set_memslot+0x3c2/0x1160 [kvm] kvm_set_memory_region.part.0+0x86a/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Reported-by: Alexander Potapenko <[email protected]> Fixes: a7800aa ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory") Cc: [email protected] Link: https://patch.msgid.link/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

… to macb_open() commit 99537d5 upstream. In the non-RT kernel, local_bh_disable() merely disables preemption, whereas it maps to an actual spin lock in the RT kernel. Consequently, when attempting to refill RX buffers via netdev_alloc_skb() in macb_mac_link_up(), a deadlock scenario arises as follows: WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e #39 Not tainted ------------------------------------------------------ kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit +0x148/0xb7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&queue->tx_ptr_lock){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x148/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #2 (_xmit_ETHER#2){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 sch_direct_xmit+0x11c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #1 ((softirq_ctrl.lock)){+.+.}-{3:3}: lock_release+0x250/0x348 __local_bh_enable_ip+0x7c/0x240 __netdev_alloc_skb+0x1b4/0x1d8 gem_rx_refill+0xdc/0x240 gem_init_rings+0xb4/0x108 macb_mac_link_up+0x9c/0x2b4 phylink_resolve+0x170/0x614 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #0 (&bp->lock){+.+.}-{3:3}: __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &bp->lock --> _xmit_ETHER#2 --> &queue->tx_ptr_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&queue->tx_ptr_lock); lock(_xmit_ETHER#2); lock(&queue->tx_ptr_lock); lock(&bp->lock); *** DEADLOCK *** Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0xa0/0xf0 dump_stack+0x18/0x24 print_circular_bug+0x28c/0x370 check_noncircular+0x198/0x1ac __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 Notably, invoking the mog_init_rings() callback upon link establishment is unnecessary. Instead, we can exclusively call mog_init_rings() within the ndo_open() callback. This adjustment resolves the deadlock issue. Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings() when opening the network interface via at91ether_open(), moving mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC check. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Cc: [email protected] Suggested-by: Kevin Hao <[email protected]> Signed-off-by: Xiaolei Wang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 20cf2ae upstream. The GPIO controller is configured as non-sleeping but it uses generic pinctrl helpers which use a mutex for synchronization. This can cause the following lockdep splat with shared GPIOs enabled on boards which have multiple devices using the same GPIO: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name: kworker/u16:0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 6 locks held by kworker/u16:0/12: #0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0}, at: process_one_work+0x18c/0x604 #1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x604 #2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x1b0 #3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 #4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at: gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy] #5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 irq event stamp: 81450 hardirqs last enabled at (81449): [<ffff8000813acba4>] _raw_spin_unlock_irqrestore+0x74/0x78 hardirqs last disabled at (81450): [<ffff8000813abfb8>] _raw_spin_lock_irqsave+0x84/0x88 softirqs last enabled at (79616): [<ffff8000811455fc>] __alloc_skb+0x17c/0x1e8 softirqs last disabled at (79614): [<ffff8000811455fc>] __alloc_skb+0x17c/0x1e8 CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.0-rc4-next-20260105+ #11975 PREEMPT Hardware name: Hardkernel ODROID-M1 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 __might_resched+0x144/0x248 __might_sleep+0x48/0x98 __mutex_lock+0x5c/0x894 mutex_lock_nested+0x24/0x30 pinctrl_get_device_gpio_range+0x44/0x128 pinctrl_gpio_direction+0x3c/0xe0 pinctrl_gpio_direction_output+0x14/0x20 rockchip_gpio_direction_output+0xb8/0x19c gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_direction_output+0x34/0xf8 gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy] gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_configure_flags+0xbc/0x480 gpiod_find_and_request+0x1a0/0x574 gpiod_get_index+0x58/0x84 devm_gpiod_get_index+0x20/0xb4 devm_gpiod_get_optional+0x18/0x30 rockchip_pcie_probe+0x98/0x380 platform_probe+0x5c/0xac really_probe+0xbc/0x298 Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio") Cc: [email protected] Reported-by: Marek Szyprowski <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Acked-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

quic-viskuma changed the title ~~Add Email Checker~~ ci: Add email checker May 16, 2025

quic-viskuma requested review from anshulg-qti, idlethread, quic-nasserg and shashim-quic May 16, 2025 14:45

ci: Add email checker

b75268a

Integrate the Qualcomm Commit Emails Check Action to validate the commit's author and committer email addresses - https://github.com/qualcomm/commit-emails-check-action Signed-off-by: VISHAL KUMAR <[email protected]>

quic-viskuma force-pushed the qcom-next-staging branch from 71b405f to b75268a Compare May 16, 2025 14:59

quic-viskuma changed the base branch from qcom-next-staging to main May 21, 2025 07:14

quic-nasserg suggested changes May 21, 2025

View reviewed changes

.github/workflows/email_checker.yml Outdated Show resolved Hide resolved

Enable email checker on qcom-next-staging branch

69413bb

Need email checker on qcom-next-staging branch only Co-authored-by: Nasser Grainawi <[email protected]> Signed-off-by: VISHAL KUMAR <[email protected]>

quic-viskuma requested a review from quic-nasserg May 21, 2025 15:41

quic-viskuma changed the base branch from main to qcom-next-staging May 21, 2025 15:53

quic-nasserg approved these changes May 21, 2025

View reviewed changes

anshulg-qti approved these changes May 21, 2025

View reviewed changes

shashim-quic merged commit 6ba1e48 into qualcomm-linux:qcom-next-staging May 22, 2025
1 check passed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ci: Add email checker #3

ci: Add email checker #3

Uh oh!

quic-viskuma commented May 16, 2025 •

edited

Loading

Uh oh!

quic-nasserg commented May 16, 2025

Uh oh!

shashim-quic commented May 17, 2025

Uh oh!

anshulg-qti commented May 19, 2025

Uh oh!

anshulg-qti commented May 20, 2025

Uh oh!

quic-nasserg commented May 20, 2025

Uh oh!

shashim-quic commented May 21, 2025

Uh oh!

quic-nasserg commented May 21, 2025

Uh oh!

shashim-quic commented May 21, 2025

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

4 participants

ci: Add email checker #3

ci: Add email checker #3

Uh oh!

Conversation

quic-viskuma commented May 16, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

quic-nasserg commented May 16, 2025

Uh oh!

shashim-quic commented May 17, 2025

Uh oh!

anshulg-qti commented May 19, 2025

Uh oh!

anshulg-qti commented May 20, 2025

Uh oh!

quic-nasserg commented May 20, 2025

Uh oh!

shashim-quic commented May 21, 2025

Uh oh!

quic-nasserg commented May 21, 2025

Uh oh!

shashim-quic commented May 21, 2025

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

4 participants

quic-viskuma commented May 16, 2025 •

edited

Loading