A tool to automatically mount an sdcard/usb stick, and push all files to moonraker.
I strongly recommend running Klipper printers on some kind of network, whenever possible. It's really how the entire stack is designed to work.
This tool is just a workaround, to help out when that really isn't possible
I also strongly recommend KlipperScreen, if you're trying to use this tool to run a printer without a network connection.
(should work on most Debian derived systems, including PiOS)
git clone https://github.com/shiftingtech/Moonraker-loader.git
sudo ln -sf ~/Moonraker-loader/assets/89-moonraker-loader.rules /etc/udev/rules.d
sudo ln -sf ~/Moonraker-loader/assets/*.sh /usr/local/sbin
then reboot your pi
Yes, maybe. But it means that the Moonraker metadata extraction, and the cancel object parser both run, which they don't in most other non-networked approaches.
- Put some gcode files in the root directory of an sdcard or usb stick
- Plug it into the Pi that runs your printer
- Wait until the files appear in KlipperScreen (or however you're controlling the printer)
- Remove the stick
