Update docs to point at v0.3.0

content/en/docs/contrib/troubleshooting.md

@@ -12,11 +12,11 @@ might assist you with your work.
 ## No endpoints available for service "spin-operator-webhook-service"
 
 When following the quickstart guide the following error can occur when running the `kubectl apply -f
-https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml`
+https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml`
 command:
 
 ```console
-Error from server (InternalError): error when creating "https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml": Internal error occurred: failed calling webhook "mspinappexecutor.kb.io": failed to call webhook: Post "https://spin-operator-webhook-service.spin-operator.svc:443/mutate-core-spinoperator-dev-v1alpha1-spinappexecutor?timeout=10s": no endpoints available for service "spin-operator-webhook-service"
+Error from server (InternalError): error when creating "https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml": Internal error occurred: failed calling webhook "mspinappexecutor.kb.io": failed to call webhook: Post "https://spin-operator-webhook-service.spin-operator.svc:443/mutate-core-spinoperator-dev-v1alpha1-spinappexecutor?timeout=10s": no endpoints available for service "spin-operator-webhook-service"
 ```
 
 To address the error above, first look to see if Spin Operator is running:
@@ -62,13 +62,13 @@ To resolve this issue, please try to install the Spin Operator again. Except thi
 helm upgrade --install spin-operator \
   --namespace spin-operator \
   --create-namespace \
-  --version 0.2.0 \
+  --version 0.3.0 \
   --wait \
   oci://ghcr.io/spinkube/charts/spin-operator
 ```
 
 Once the Spin Operator is installed you can try and run the `kubectl apply -f
-https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml`
+https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml`
 command again. The issue should be resolved now.
 
 ## Error Validating Data: Connection Refused

content/en/docs/install/azure-kubernetes-service.md

@@ -84,10 +84,10 @@ installed.
 
 ```shell
 # Install the CRDs
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 
 # Install the Runtime Class
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
 ```
 
 The following installs [cert-manager](https://github.com/cert-manager/cert-manager) which is
@@ -156,7 +156,7 @@ helm install spin-operator \
 Lastly, create the [shim executor]({{< ref "glossary#spin-app-executor-crd" >}})::
 
 ```console
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
 ```
 
 ## Deploying a Spin App to AKS

content/en/docs/install/installing-with-helm.md

@@ -62,23 +62,23 @@ here we install the defaults.
   representing Spin applications to be scheduled on the cluster.
 
 ```shell
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```
 
 - Next we create a [RuntimeClass]({{< ref "glossary#runtime-class" >}}) that points to the `spin`
 handler called `wasmtime-spin-v2`. If you are deploying to a production cluster that only has a shim
 on a subset of nodes, you'll need to modify the RuntimeClass with a `nodeSelector:`:
 
 ```shell
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
 ```
 
 - Finally, we create a `containerd-spin-shim` [SpinAppExecutor]({{< ref
   "glossary#spin-app-executor-crd" >}}). This tells the Spin Operator to use the RuntimeClass we
   just created to run Spin Apps:
 
 ```shell
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
 ```
 
 ### Installing the Spin Operator Chart
@@ -102,7 +102,7 @@ Note that you may also need to upgrade the spin-operator CRDs in tandem with upg
 release:
 
 ```shell
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```
 
 To upgrade the `spin-operator` release, run the following:
@@ -131,7 +131,7 @@ To completely uninstall all resources related to spin-operator, you may want to
 corresponding CRD resources and the RuntimeClass:
 
 ```shell
-kubectl delete -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
-kubectl delete -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
-kubectl delete -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl delete -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
+kubectl delete -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
+kubectl delete -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```

content/en/docs/install/microk8s.md

@@ -68,8 +68,8 @@ before proceeding.
 First, we need to apply a runtime class and a CRD for SpinKube:
 
 ```console { data-plausible="copy-quick-deploy-sample" }
-$ microk8s kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
-$ microk8s kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+$ microk8s kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
+$ microk8s kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```
 
 Both of these should apply immediately.
@@ -97,7 +97,7 @@ Now we have the main operator installed. There is just one more step. We need to
 executor, which is a special CRD that allows us to use multiple executors for WebAssembly.
 
 ```console { data-plausible="copy-quick-deploy-sample" }
-$ microk8s kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
+$ microk8s kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
 
 ```
 

content/en/docs/install/quickstart.md

@@ -55,14 +55,14 @@ kubectl wait --for=condition=available --timeout=300s deployment/cert-manager-we
 > every node.
 
 ```console { data-plausible="copy-quick-apply-runtime-class" }
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
 ```
 
 4. Apply the [Custom Resource Definitions]({{< ref "glossary#custom-resource-definition-crd" >}})
    used by the Spin Operator:
 
 ```console { data-plausible="copy-quick-apply-crd" }
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```
 
 ## Deploy the Spin Operator
@@ -77,15 +77,15 @@ and pods are spinning up.
 helm install spin-operator \
   --namespace spin-operator \
   --create-namespace \
-  --version 0.2.0 \
+  --version 0.3.0 \
   --wait \
   oci://ghcr.io/spinkube/charts/spin-operator
 ```
 
 Lastly, create the [shim executor]({{< ref "glossary#spin-app-executor-crd" >}}):
 
 ```console { data-plausible="copy-quick-create-shim-executor" }
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
 ```
 
 ## Run the Sample Application

content/en/docs/topics/autoscaling/scaling-with-hpa.md

@@ -74,10 +74,10 @@ Next, run the following commands to install the Spin [Runtime Class]({{<ref "glo
 
 ```console
 # Install the RuntimeClass
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
 
 # Install the CRDs
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```
 
 Lastly, install Spin Operator using `helm` and the [shim executor]({{< ref
@@ -88,12 +88,12 @@ Lastly, install Spin Operator using `helm` and the [shim executor]({{< ref
 helm install spin-operator \
   --namespace spin-operator \
   --create-namespace \
-  --version 0.2.0 \
+  --version 0.3.0 \
   --wait \
   oci://ghcr.io/spinkube/charts/spin-operator
 
 # Install the shim executor
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
 ```
 
 Great, now you have Spin Operator up and running on your cluster. This means you’re set to create

content/en/docs/topics/autoscaling/scaling-with-keda.md

@@ -74,10 +74,10 @@ Next, run the following commands to install the Spin [Runtime Class]({{<ref "glo
 
 ```console
 # Install the RuntimeClass
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.runtime-class.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.runtime-class.yaml
 
 # Install the CRDs
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.crds.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.crds.yaml
 ```
 
 Lastly, install Spin Operator using `helm` and the [shim executor]({{< ref
@@ -88,12 +88,12 @@ Lastly, install Spin Operator using `helm` and the [shim executor]({{< ref
 helm install spin-operator \
   --namespace spin-operator \
   --create-namespace \
-  --version 0.2.0 \
+  --version 0.3.0 \
   --wait \
   oci://ghcr.io/spinkube/charts/spin-operator
 
 # Install the shim executor
-kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.2.0/spin-operator.shim-executor.yaml
+kubectl apply -f https://github.com/spinkube/spin-operator/releases/download/v0.3.0/spin-operator.shim-executor.yaml
 ```
 
 Great, now you have Spin Operator up and running on your cluster. This means you’re set to create

crd-reference/generate.sh

@@ -7,7 +7,7 @@ root_dir=$(dirname ${script_dir})
 
 cd $script_dir
 
-SPIN_OPERATOR_RELEASE=${SPIN_OPERATOR_RELEASE:-v0.2.0}
+SPIN_OPERATOR_RELEASE=${SPIN_OPERATOR_RELEASE:-v0.3.0}
 
 echo "Installing crdoc"
 go install fybrik.io/crdoc@latest