ci(example): update BareMinimun.ino

Signed-off-by: Frederic Pillon <[email protected]>
stm32duino · Nov 14, 2023 · 0a926cf · 0a926cf
1 parent 392469a
commit 0a926cf
Showing 1 changed file with 17 additions and 19 deletions.
diff --git a/CI/build/examples/BareMinimum/BareMinimum.ino b/CI/build/examples/BareMinimum/BareMinimum.ino
@@ -19,38 +19,37 @@
 /* ----------------------------------------------------------------------
   Defines each of the tests performed
   ------------------------------------------------------------------- */
-#define MAX_BLOCKSIZE   2
-#define DELTA           (0.0001f)
+#define MAX_BLOCKSIZE 2
+#define DELTA (0.0001f)
 /* ----------------------------------------------------------------------
   Test input data for Floating point sin_cos example for 32-blockSize
   Generated by the MATLAB randn() function
   ------------------------------------------------------------------- */
-const float32_t testInput_f32[MAX_BLOCKSIZE] =
-{
-  -1.244916875853235400,  -4.793533929171324800
+const float32_t testInput_f32[MAX_BLOCKSIZE] = {
+  -1.244916875853235400, -4.793533929171324800
 };
 const float32_t testRefOutput_f32 = 1.000000000;
 /* ----------------------------------------------------------------------
   Declare Global variables
   ------------------------------------------------------------------- */
 uint32_t blockSize = 2;
-float32_t  testOutput;
-float32_t  cosOutput;
-float32_t  sinOutput;
-float32_t  cosSquareOutput;
-float32_t  sinSquareOutput;
+float32_t testOutput;
+float32_t cosOutput;
+float32_t sinOutput;
+float32_t cosSquareOutput;
+float32_t sinSquareOutput;
 /* ----------------------------------------------------------------------
   Max magnitude FFT Bin test
   ------------------------------------------------------------------- */
 arm_status status;
 /* CMSIS_DSP */
 
 #ifndef USER_BTN
-#define USER_BTN      2
+#define USER_BTN 2
 #endif
 
 #ifndef LED_BUILTIN
-#define LED_BUILTIN   13
+#define LED_BUILTIN 13
 #endif
 
 #ifndef PIN_SERIAL_RX
@@ -72,8 +71,7 @@ SoftwareSerial swSerial(10, 11);
 
 void setup() {
   // Serial HW & SW
-#if (!defined(USBD_USE_CDC) && !defined(DISABLE_GENERIC_SERIALUSB)) &&\
-    (!defined(VIRTIOCON) && !defined(DISABLE_GENERIC_SERIALVIRTIO))
+#if (!defined(USBD_USE_CDC) && !defined(DISABLE_GENERIC_SERIALUSB)) && (!defined(VIRTIOCON) && !defined(DISABLE_GENERIC_SERIALVIRTIO))
   Serial.setRx(PIN_SERIAL_RX);
   Serial.setTx(digitalPinToPinName(PIN_SERIAL_TX));
 #endif
@@ -92,7 +90,7 @@ void setup() {
 
   // EEPROM
   byte value = EEPROM.read(0x01);
-  EEPROM.write(EEPROM.length()-1, value);
+  EEPROM.write(EEPROM.length() - 1, value);
 
 #ifndef STM32MP1xx
   // IWDG
@@ -111,13 +109,13 @@ void setup() {
 #endif
 
   // SPI
-  SPISettings settings(SPI_SPEED_CLOCK_DEFAULT, MSBFIRST, SPI_MODE_0);
+  SPISettings settings(SPI_SPEED_CLOCK_DEFAULT, MSBFIRST, SPI_MODE0);
   SPI.setMISO(PIN_SPI_MISO);
   SPI.setMOSI(PIN_SPI_MOSI);
   SPI.setSCLK(PIN_SPI_SCK);
   SPI.setSSEL(digitalPinToPinName(PIN_SPI_SS));
-  SPI.begin(PIN_SPI_SS);
-  SPI.beginTransaction(1, settings);
+  SPI.begin();
+  SPI.beginTransaction(settings);
   SPI.endTransaction();
   SPI.transfer(1);
   SPI.end();
@@ -146,7 +144,7 @@ void setup() {
     diff = fabsf(testRefOutput_f32 - testOutput);
     /* Comparison of sin_cos value with reference */
     status = (diff > DELTA) ? ARM_MATH_TEST_FAILURE : ARM_MATH_SUCCESS;
-    if ( status == ARM_MATH_TEST_FAILURE) {
+    if (status == ARM_MATH_TEST_FAILURE) {
       break;
     }
   }