chore(C0): update variants against CubeMX DB release 6.0.120

Signed-off-by: Frederic Pillon <[email protected]>

variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PeripheralPins.c

@@ -13,7 +13,7 @@
 /*
  * Automatically generated from STM32C011D6Yx.xml, STM32C011F(4-6)Px.xml
  * STM32C011F(4-6)Ux.xml, STM32C031F(4-6)Px.xml
- * CubeMX DB release 6.0.110
+ * CubeMX DB release 6.0.120
  */
 #if !defined(CUSTOM_PERIPHERAL_PINS)
 #include "Arduino.h"

variants/STM32C0xx/C011J(4-6)M/PeripheralPins.c

@@ -12,7 +12,7 @@
  */
 /*
  * Automatically generated from STM32C011J(4-6)Mx.xml
- * CubeMX DB release 6.0.110
+ * CubeMX DB release 6.0.120
  */
 #if !defined(CUSTOM_PERIPHERAL_PINS)
 #include "Arduino.h"

variants/STM32C0xx/C031C(4-6)(T-U)/PeripheralPins.c

@@ -12,7 +12,7 @@
  */
 /*
  * Automatically generated from STM32C031C(4-6)Tx.xml, STM32C031C(4-6)Ux.xml
- * CubeMX DB release 6.0.110
+ * CubeMX DB release 6.0.120
  */
 #if !defined(CUSTOM_PERIPHERAL_PINS)
 #include "Arduino.h"

variants/STM32C0xx/C031G(4-6)U/PeripheralPins.c

@@ -12,7 +12,7 @@
  */
 /*
  * Automatically generated from STM32C031G(4-6)Ux.xml
- * CubeMX DB release 6.0.110
+ * CubeMX DB release 6.0.120
  */
 #if !defined(CUSTOM_PERIPHERAL_PINS)
 #include "Arduino.h"

variants/STM32C0xx/C031K(4-6)(T-U)/PeripheralPins.c

@@ -12,7 +12,7 @@
  */
 /*
  * Automatically generated from STM32C031K(4-6)Tx.xml, STM32C031K(4-6)Ux.xml
- * CubeMX DB release 6.0.110
+ * CubeMX DB release 6.0.120
  */
 #if !defined(CUSTOM_PERIPHERAL_PINS)
 #include "Arduino.h"

variants/STM32C0xx/C071C(8-B)(T-U)/PinNamesVar.h

@@ -0,0 +1,87 @@
+/* Alternate pin name */
+PA_0_ALT1  = PA_0  | ALT1,
+PA_0_ALT2  = PA_0  | ALT2,
+PA_1_ALT1  = PA_1  | ALT1,
+PA_1_ALT2  = PA_1  | ALT2,
+PA_2_ALT1  = PA_2  | ALT1,
+PA_2_ALT2  = PA_2  | ALT2,
+PA_3_ALT1  = PA_3  | ALT1,
+PA_3_ALT2  = PA_3  | ALT2,
+PA_4_ALT1  = PA_4  | ALT1,
+PA_4_ALT2  = PA_4  | ALT2,
+PA_5_ALT1  = PA_5  | ALT1,
+PA_5_ALT2  = PA_5  | ALT2,
+PA_6_ALT1  = PA_6  | ALT1,
+PA_7_ALT1  = PA_7  | ALT1,
+PA_7_ALT2  = PA_7  | ALT2,
+PA_7_ALT3  = PA_7  | ALT3,
+PA_8_ALT1  = PA_8  | ALT1,
+PA_8_ALT2  = PA_8  | ALT2,
+PA_8_ALT3  = PA_8  | ALT3,
+PA_8_ALT4  = PA_8  | ALT4,
+PA_8_ALT5  = PA_8  | ALT5,
+PA_9_ALT1  = PA_9  | ALT1,
+PA_10_ALT1 = PA_10 | ALT1,
+PA_15_ALT1 = PA_15 | ALT1,
+PB_0_ALT1  = PB_0  | ALT1,
+PB_1_ALT1  = PB_1  | ALT1,
+PB_1_ALT2  = PB_1  | ALT2,
+PB_1_ALT3  = PB_1  | ALT3,
+PB_3_ALT1  = PB_3  | ALT1,
+PB_3_ALT2  = PB_3  | ALT2,
+PB_5_ALT1  = PB_5  | ALT1,
+PB_6_ALT1  = PB_6  | ALT1,
+PB_6_ALT2  = PB_6  | ALT2,
+PB_6_ALT3  = PB_6  | ALT3,
+PB_6_ALT4  = PB_6  | ALT4,
+PB_6_ALT5  = PB_6  | ALT5,
+PB_7_ALT1  = PB_7  | ALT1,
+PB_7_ALT2  = PB_7  | ALT2,
+PB_7_ALT3  = PB_7  | ALT3,
+PB_7_ALT4  = PB_7  | ALT4,
+PB_8_ALT1  = PB_8  | ALT1,
+PB_9_ALT1  = PB_9  | ALT1,
+PC_6_ALT1  = PC_6  | ALT1,
+PC_7_ALT1  = PC_7  | ALT1,
+PC_14_ALT1 = PC_14 | ALT1,
+
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+  SYS_WKUP1 = PA_0,
+#endif
+#ifdef PWR_WAKEUP_PIN2
+  SYS_WKUP2 = PC_13,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+  SYS_WKUP3 = PB_6,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+  SYS_WKUP4 = PA_2,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+  SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+  SYS_WKUP6 = PB_5,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+  SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+  SYS_WKUP8 = NC,
+#endif
+
+/* USB */
+#ifdef USBCON
+  USB_DM  = PA_11,
+  USB_DP  = PA_12,
+  #ifdef USB_NOE_PA_4
+    USB_NOE = PA_4,
+  #endif
+  #ifdef USB_NOE_PA_13
+    USB_NOE = PA_13,
+  #endif
+  #ifdef USB_NOE_PA_15
+    USB_NOE = PA_15,
+  #endif
+#endif

variants/STM32C0xx/C071C(8-B)(T-U)/boards_entry.txt

@@ -0,0 +1,37 @@
+# This file help to add generic board entry.
+# upload.maximum_size and product_line have to be verified
+# and changed if needed.
+# See: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Add-a-new-variant-%28board%29
+
+# Generic C071C8Tx
+GenC0.menu.pnum.GENERIC_C071C8TX=Generic C071C8Tx
+GenC0.menu.pnum.GENERIC_C071C8TX.upload.maximum_size=65536
+GenC0.menu.pnum.GENERIC_C071C8TX.upload.maximum_data_size=24576
+GenC0.menu.pnum.GENERIC_C071C8TX.build.board=GENERIC_C071C8TX
+GenC0.menu.pnum.GENERIC_C071C8TX.build.product_line=STM32C071xx
+GenC0.menu.pnum.GENERIC_C071C8TX.build.variant=STM32C0xx/C071C(8-B)(T-U)
+
+# Generic C071C8Ux
+GenC0.menu.pnum.GENERIC_C071C8UX=Generic C071C8Ux
+GenC0.menu.pnum.GENERIC_C071C8UX.upload.maximum_size=65536
+GenC0.menu.pnum.GENERIC_C071C8UX.upload.maximum_data_size=24576
+GenC0.menu.pnum.GENERIC_C071C8UX.build.board=GENERIC_C071C8UX
+GenC0.menu.pnum.GENERIC_C071C8UX.build.product_line=STM32C071xx
+GenC0.menu.pnum.GENERIC_C071C8UX.build.variant=STM32C0xx/C071C(8-B)(T-U)
+
+# Generic C071CBTx
+GenC0.menu.pnum.GENERIC_C071CBTX=Generic C071CBTx
+GenC0.menu.pnum.GENERIC_C071CBTX.upload.maximum_size=131072
+GenC0.menu.pnum.GENERIC_C071CBTX.upload.maximum_data_size=24576
+GenC0.menu.pnum.GENERIC_C071CBTX.build.board=GENERIC_C071CBTX
+GenC0.menu.pnum.GENERIC_C071CBTX.build.product_line=STM32C071xx
+GenC0.menu.pnum.GENERIC_C071CBTX.build.variant=STM32C0xx/C071C(8-B)(T-U)
+
+# Generic C071CBUx
+GenC0.menu.pnum.GENERIC_C071CBUX=Generic C071CBUx
+GenC0.menu.pnum.GENERIC_C071CBUX.upload.maximum_size=131072
+GenC0.menu.pnum.GENERIC_C071CBUX.upload.maximum_data_size=24576
+GenC0.menu.pnum.GENERIC_C071CBUX.build.board=GENERIC_C071CBUX
+GenC0.menu.pnum.GENERIC_C071CBUX.build.product_line=STM32C071xx
+GenC0.menu.pnum.GENERIC_C071CBUX.build.variant=STM32C0xx/C071C(8-B)(T-U)
+

variants/STM32C0xx/C071C(8-B)(T-U)/generic_clock.c

@@ -0,0 +1,28 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#if defined(ARDUINO_GENERIC_C071C8TX) || defined(ARDUINO_GENERIC_C071C8UX) ||\
+    defined(ARDUINO_GENERIC_C071CBTX) || defined(ARDUINO_GENERIC_C071CBUX)
+#include "pins_arduino.h"
+
+/**
+  * @brief  System Clock Configuration
+  * @param  None
+  * @retval None
+  */
+WEAK void SystemClock_Config(void)
+{
+  /* SystemClock_Config can be generated by STM32CubeMX */
+#warning "SystemClock_Config() is empty. Default clock at reset is used."
+}
+
+#endif /* ARDUINO_GENERIC_* */

variants/STM32C0xx/C071C(8-B)(T-U)/variant_generic.cpp

@@ -0,0 +1,87 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#if defined(ARDUINO_GENERIC_C071C8TX) || defined(ARDUINO_GENERIC_C071C8UX) ||\
+    defined(ARDUINO_GENERIC_C071CBTX) || defined(ARDUINO_GENERIC_C071CBUX)
+#include "pins_arduino.h"
+
+// Digital PinName array
+const PinName digitalPin[] = {
+  PA_0,   // D0/A0
+  PA_1,   // D1/A1
+  PA_2,   // D2/A2
+  PA_3,   // D3/A3
+  PA_4,   // D4/A4
+  PA_5,   // D5/A5
+  PA_6,   // D6/A6
+  PA_7,   // D7/A7
+  PA_8,   // D8/A8
+  PA_9,   // D9
+  PA_10,  // D10
+  PA_11,  // D11
+  PA_12,  // D12
+  PA_13,  // D13/A9
+  PA_14,  // D14/A10
+  PA_15,  // D15
+  PB_0,   // D16/A11
+  PB_1,   // D17/A12
+  PB_2,   // D18/A13
+  PB_3,   // D19
+  PB_4,   // D20
+  PB_5,   // D21
+  PB_6,   // D22
+  PB_7,   // D23
+  PB_8,   // D24
+  PB_9,   // D25
+  PB_10,  // D26/A14
+  PB_11,  // D27/A15
+  PB_12,  // D28/A16
+  PB_13,  // D29
+  PB_14,  // D30
+  PB_15,  // D31
+  PC_6,   // D32
+  PC_7,   // D33
+  PC_13,  // D34
+  PC_14,  // D35
+  PC_15,  // D36
+  PD_0,   // D37
+  PD_1,   // D38
+  PD_2,   // D39
+  PD_3,   // D40
+  PF_0,   // D41
+  PF_1,   // D42
+  PF_2,   // D43
+  PF_3    // D44
+};
+
+// Analog (Ax) pin number array
+const uint32_t analogInputPin[] = {
+  0,  // A0,  PA0
+  1,  // A1,  PA1
+  2,  // A2,  PA2
+  3,  // A3,  PA3
+  4,  // A4,  PA4
+  5,  // A5,  PA5
+  6,  // A6,  PA6
+  7,  // A7,  PA7
+  8,  // A8,  PA8
+  13, // A9,  PA13
+  14, // A10, PA14
+  16, // A11, PB0
+  17, // A12, PB1
+  18, // A13, PB2
+  26, // A14, PB10
+  27, // A15, PB11
+  28  // A16, PB12
+};
+
+#endif /* ARDUINO_GENERIC_* */