Libraries

Herafter, a non exhaustive list of libraries compatible with the STM32 core.

Currently, libraries that come with the Arduino IDE should work (could required some pins update in the sketch)

/img/Warning-icon.png Arduino boards provide ICSP connector used by several Arduino shield for SPI signal: MISO/MOSI/SCK. STM32 boards do not have this ICSP connector, so this requires to manually wire those SPI signal on the desire pin (mainly: D11 to D13)

Built-in (delivered with the core package)

SPI: follow the official SPI API
Wire (I2C): follow the official Wire API.
EEPROM: follow the official EEPROM API.
Servo: follow the official Servo API. Need some review. Range is not correct.

Dedicated

Some libraries have been developed to support specific hardware features:

STM32Ethernet: for on board Ethernet port (ex: Nucleo-F429ZI).
This library is fully compatible with Arduino Ethernet API.
STM32SD: for board with SD card slot (ex: Disco-F746).
This library is fully compatible with Arduino SD API.

Goal is to have all dedicated STM32 libraries available through the "Library Manager"

Have a look here to see which one are available or thanks the "Library Manager"

http://www.arduinolibraries.info/architectures/stm32